WCH Datasheets
94 WCH datasheets read into specs, pinouts and ratings, including Microcontrollers (MCU), Interface ICs and Diodes.
WCH parts by category
- Microcontrollers (MCU) (49)
- Interface ICs (18)
- Diodes (5)
WCH datasheets
94 parts · page 1 of 4. Most used first, then by part number.
CH347T
WCH
A high-speed USB bus bridge chip that provides asynchronous serial ports, I2C, SPI, JTAG, and SWD interfaces.
CH217K
WCH
USB port power distribution switch with adjustable current limit (400mA to 2.7A via external resistor), integrated overcurrent, overtemperature and undervoltage protection, 70mΩ on-resistance.
CH340N
WCH
USB 2.0 full-speed to UART serial bridge chip with MODEM handshake signals and built-in clock, no external crystal required
CH213K
WCH
Low dropout ideal diode chip with current limiting, short-circuit, over-temperature and reverse polarity protection for 2.2V-5.5V DC supplies up to ~1A.
CH340G
WCH
USB bus conversion chip that provides a full-speed USB device interface to emulate a standard UART interface or a printer interface, supporting various baud rates and MODEM signals.
CH32H417QEU6
WCH
QFN-128(12.3x12.3) Microcontrollers RoHS
CH213
WCH
Low-dropout ideal diode chip with current limiting, short-circuit, over-temperature and reverse polarity protection for DC supplies up to ~1A at 5V
CH213B
WCH
Low-dropout ideal diode chip with current limiting, short-circuit, over-temperature and reverse polarity protection for DC supplies up to 5V/1A; CH213B contains two independent ideal diodes sharing GND.
CH213KS
WCH
Low-dropout ideal diode chip with integrated current limiting, short-circuit, over-temperature and reverse-polarity protection for up to ~1A DC at 5V; acts as a Schottky diode plus self-recovery fuse with much lower voltage drop.
CH213L
WCH
Low dropout ideal diode chip with current limiting, short-circuit, over-temperature and reverse power polarity protection for DC supplies up to 1A at 5V
CH217
WCH
USB port power switch chip with adjustable current limit threshold (400mA to 2.7A) and integrated overcurrent, overtemperature, and undervoltage protection.
CH32F203
WCH
Industrial-grade 144MHz ARM Cortex-M3 MCU with 224KB CodeFlash, 20KB SRAM, dual USB (Host/Device), CAN 2.0B, 2 op-amp/comparators, 4 USARTs, 2 I2Cs and 12-bit ADC
CH32F203C8T6
WCH
Industrial-grade enhanced small-to-medium capacity general-purpose microcontroller based on 32-bit ARM Cortex-M3 core, offering high performance and low power consumption.
CH32F203C8U6
WCH
Industrial-grade 32-bit ARM Cortex-M3 MCU running up to 144MHz with 224KB CodeFlash, 20KB SRAM, dual USB (Host/Device), CAN 2.0B, 2 op-amp/comparators, 12-bit ADC and 4 USARTs.
CH32F203K8T6
WCH
Industrial-grade 32-bit ARM Cortex-M3 microcontroller running up to 144MHz with dual USB (Host/Device), CAN 2.0B, 2 op-amp/comparators, 12-bit ADC, 4 USARTs and 2 I2Cs.
CH32H417
WCH
Dual-core Qingke RISC-V5F (400MHz) and RISC-V3F (150MHz) MCU with USB 3.0/2.0, 10/100M Ethernet MAC+PHY, SerDes, USB PD/Type-C, 960KB flash and 896KB SRAM.
CH32H417MEU6
WCH
Dual-core Qingke RISC-V5F (400MHz) and RISC-V3F (150MHz) MCU with USB 3.0, 100M Ethernet MAC+PHY, SerDes, USB PD/Type-C, dual 12-bit ADC and many communication peripherals, in QFN88 package.
CH32H417RM
WCH
Dual-core Qingke RISC-V5F (400MHz) and RISC-V3F (150MHz) MCU with integrated USB 3.2 Gen1, 100M Ethernet MAC+PHY, SerDes, Type-C/PD controller, and rich analog and digital peripherals
CH32H417WEU6
WCH
Interconnected general-purpose MCU with dual Qingke RISC-V5F (400MHz) and RISC-V3F (150MHz) cores, integrating USB 3.0/2.0, 10/100M Ethernet MAC+PHY, USB PD/Type-C, ADCs/DACs and rich serial peripherals.
CH32V003F4U6
WCH
Industrial-grade QingKe RISC-V2A (RV32EC) microcontroller running up to 48MHz with 16KB flash, 2KB SRAM, 10-bit ADC, op-amp/comparator, DMA, timers, USART, I2C and SPI in a QFN20 package.
CH32V203
WCH
Industrial-grade enhanced low-power general-purpose MCU based on the QingKe V4B RISC-V core running at up to 144MHz, with USB host/device, CAN, dual OPA, dual 12-bit ADC and touch-key detection
CH32V203C6
WCH
Industrial-grade low-power 32-bit RISC-V (QingKe V4B) general-purpose MCU running up to 144MHz with 32KB flash/10KB SRAM in the C6 variant, USB host/device, CAN, 12-bit ADC, dual OPA, and touch-key
CH32V203C8
WCH
Industrial-grade enhanced low-power general-purpose MCU based on QingKe V4B 32-bit RISC-V core, 144MHz, with 64KB Flash, 20KB SRAM, USB host/device, CAN, 2x 12-bit ADC and dual OPA
CH32V203C8T6
WCH
The CH32V203C8T6 is an industrial-grade, enhanced low-power general-purpose microcontroller based on a 32-bit RISC-V V4B core, featuring a 144MHz main frequency, 64KB Flash, 2
CH32V203C8U6
WCH
Industrial-grade low-power general-purpose 32-bit RISC-V (QingKe V4B) MCU running at 144MHz with 64KB Flash, 20KB SRAM, USB host/device, CAN, 12-bit ADC and dual OPA.
CH32V203F6
WCH
Industrial-grade low-power general-purpose MCU based on QingKe V4B 32-bit RISC-V core running up to 144MHz, with 32KB Flash, 10KB SRAM, USB host/device, CAN, 12-bit ADC and OPAs in a 20-pin package
CH32V203F8
WCH
Industrial-grade low-power general-purpose 32-bit RISC-V (QingKe V4B) MCU running up to 144MHz with 64KB Flash, 20KB SRAM, USB host/device, CAN, 12-bit ADCs, dual OPA and touch-key detection.
CH32V203G6
WCH
Industrial-grade low-power general-purpose MCU based on QingKe V4B 32-bit RISC-V core running up to 144MHz, with 32KB Flash, 10KB SRAM, USB host/device, CAN, dual OPA, 12-bit ADC and Touchkey.
CH32V203G8
WCH
Industrial-grade general-purpose 32-bit RISC-V (QingKe V4B) MCU with 144MHz main frequency, 64KB Flash, 20KB SRAM, USB host/device, CAN, dual ADC/OPA and touch-key support
CH32V203K6
WCH
Industrial-grade low-power general-purpose 32-bit QingKe V4B RISC-V MCU with 144MHz CPU, 32KB Flash and 10KB SRAM, dual USB (host/device), CAN, dual OPA, 12-bit ADC and touch-key support