Interface ICs Datasheets

TCA6424ARGJR

Texas Instruments

IC XPNDR 400KHZ I2C SMBUS 32UQFN

BQ25895

Texas Instruments

A highly-integrated 5-A switch-mode battery charge management and system power path management device for single cell Li-Ion and Lipolymer batteries, supporting high input voltage fast charging and adjustable 3.1-A boost operation.

CH340N

WCH

USB 2.0 full-speed to UART serial bridge chip with MODEM handshake signals and built-in clock, no external crystal required

ADM3053BRWZ

Analog Devices

2.5 kV rms signal and power isolated CAN transceiver with integrated isoPower isolated dc-to-dc converter, ISO 11898 compliant, up to 1 Mbps

ADM3053BRWZ-REEL7

Analog Devices

2.5 kV rms signal and power isolated ISO 11898 CAN transceiver with integrated isoPower isolated dc-to-dc converter, supporting data rates up to 1 Mbps

BQ25895RTWR.A

Texas Instruments

CH334

WCH

4-port USB2.0 high-speed hub controller family (CH334/CH335) with MTT/STT modes, per-port power control and overcurrent detection, built-in LDO and optional crystal-free operation

CH334P

WCH

4-port USB 2.0 high-speed hub controller with MTT mode, built-in LDO, built-in USB PHY, and optional crystal-free operation

CH334R

WCH

4-port USB 2.0 high-speed hub controller with MTT mode, built-in USB PHY, LDO, 1.5K pull-up and downstream pull-downs, optional crystal-free operation; CH334R is the QSOP16 variant with no overcurrent detection, power control, or LED indica

CH335

WCH

CH335 is a 4-port USB 2.0 high-speed hub controller with MTT/STT modes, per-port power control and overcurrent detection, and support for swapping the upstream port with downstream port 1.

CH335F

WCH

4-port USB 2.0 high-speed hub controller with MTT mode, per-port power control and overcurrent detection, built-in LDO and optional crystal-free operation, with support for swapping upstream port with downstream port #1

CH335P

WCH

4-port USB 2.0 high-speed hub controller with MTT mode, integrated USB PHY and LDO, and optional crystal-free operation; CH335P is the small QFN16 2x2mm variant.

CH340B

WCH

Full-speed USB 2.0 to UART serial adapter chip with MODEM handshake signals, built-in clock and built-in EEPROM for configuring serial numbers

CH340C

WCH

USB 2.0 full-speed to asynchronous serial port (UART) adapter chip with built-in clock, MODEM handshake signals, and baud rates from 50bps to 2Mbps

CH340K

WCH

Full-speed USB 2.0 to UART serial adapter chip with MODEM handshake signals, built-in clock and anti-current-backflow diodes on TXD, RTS# and RXD pins for independently powered MCU connections.

CH343

WCH

Full-speed USB to asynchronous serial port bridge chip with MODEM handshake signals, hardware flow control, RS485 TNOW support, and built-in clock, supporting up to 6Mbps baud rate.

CH343C

WCH

Full-speed USB to high-speed asynchronous serial port adapter chip with MODEM handshake signals, up to 6Mbps baud rate, built-in clock and no external crystal required

CH343G

WCH

Full-speed USB to high-speed asynchronous serial port (UART) adapter chip with MODEM handshake signals, hardware flow control, built-in clock and 3.3V regulator, supporting up to 6Mbps baud rate.

CH343K

WCH

Full-speed USB to high-speed asynchronous serial port (UART) adapter chip with MODEM handshake signals, up to 6Mbps baud rate and built-in clock, in ESSOP10 package for CH343K.

CH343K/C

WCH

Full-speed USB to high-speed asynchronous serial port (UART) bridge chip with MODEM handshake signals, hardware flow control, half-duplex RS485 TNOW support, and 50bps to 6Mbps baud rates.

CH347

WCH

High-speed USB bus bridge chip providing dual UART, I2C, SPI, and JTAG interfaces over USB.

CH347F

WCH

480Mbps high-speed USB bridge chip providing dual UART, I2C, SPI, JTAG and SWD interfaces over a single USB connection

CH9102

WCH

Full-speed USB 2.0 to asynchronous serial port (UART) bridge chip with MODEM handshake signals, hardware flow control, RS485 TNOW support, and baud rates up to 4Mbps.

CP2102

Silicon Labs

Highly-integrated single-chip USB-to-UART bridge controller providing a simple solution for updating RS-232 designs to USB with minimum components and PCB space.

CP2102-GM

Silicon Labs

USB Interface IC USB to UART Bridge QFN28

CP2102/9

Silicon Labs

Highly-integrated single-chip USB 2.0 full-speed to UART bridge with integrated transceiver, oscillator, on-chip EEPROM/EPROM and voltage regulator, requiring no external USB components.

CP2102EK

Silicon Labs

Evaluation kit for the CP2102 single-chip USB 2.0 full-speed to UART bridge, including a CP2102-based USB-to-UART/RS-232 evaluation board, VCP drivers, USB and RS-232 cables, and documentation.

CP2102N

Silicon Labs

Highly-integrated USB 2.0 full-speed to UART bridge controller with integrated transceiver, oscillator and voltage regulator, requiring no firmware development and supporting up to 3 Mbaud

ENC28J60

Microchip Technology

Stand-alone IEEE 802.3 compatible Ethernet controller with integrated MAC and 10Base-T PHY, 8-Kbyte packet buffer and SPI interface up to 20 MHz

ENC28J60-I/ML

Microchip Technology

Stand-alone IEEE 802.3 Ethernet controller with integrated MAC and 10Base-T PHY and an SPI interface, with 8-Kbyte dual-port buffer SRAM