Interface ICs Datasheets

INA226

Texas Instruments

36V, 16-bit I2C/SMBus-compatible current shunt and power monitor with alert output, reporting current, bus voltage, and power

INA226-Q1

Texas Instruments

INA226AIDGSR

Texas Instruments

IC CURRENT MONITOR 0.02% 10VSSOP

INA226AIDGSRG4

Texas Instruments

INA226AIDGST

Texas Instruments

IC CURRENT MONITOR 0.02% 10VSSOP

ISO1050

Texas Instruments

Galvanically isolated ISO11898-2 compliant CAN transceiver with up to 5000 VRMS isolation, 1 Mbps signaling and -27 V to 40 V bus-fault protection

ISO1050DUBR.A

Texas Instruments

Galvanically isolated ISO11898-2 CAN transceiver supporting signaling rates up to 1 Mbps with 2500 VRMS isolation in the DUB package, bus-fault protection of -27 V to 40 V, and fail-safe outputs.

ISO1050DW

Texas Instruments

Galvanically isolated CAN transceiver meeting ISO11898-2, with 5000 VRMS isolation (DW package), up to 1 Mbps signaling, and -27 V to 40 V bus-fault protection

ISO1050DW-ONLY

Texas Instruments

Galvanically isolated CAN transceiver meeting ISO11898-2, with 5000 VRMS isolation (DW variant), up to 1 Mbps signaling, and bus-fault protection of -27 V to 40 V

ISO1050DWR

Texas Instruments

Galvanically isolated CAN transceiver meeting ISO11898-2, with 5000 VRMS isolation (DW package), signaling rates up to 1 Mbps, and bus-fault protection from -27 V to 40 V

ISO1050DWR.A

Texas Instruments

Galvanically isolated CAN transceiver meeting ISO11898-2, with up to 5000 VRMS isolation, signaling rates up to 1 Mbps, and bus-fault protection of -27 V to 40 V.

ISO1050DWRG4

Texas Instruments

Galvanically isolated CAN transceiver meeting ISO11898-2, with 5000-VRMS isolation (DW package), signaling rates up to 1 Mbps, and -27 V to 40 V bus-fault protection.

ISO1050DWRG4.A

Texas Instruments

Galvanically isolated CAN transceiver meeting ISO11898-2 with 5000-VRMS isolation (DW package), signaling rates up to 1 Mbps, and bus-fault protection of -27 V to 40 V.

ISO1050L

Texas Instruments

Galvanically isolated CAN transceiver meeting ISO11898-2, with up to 5000 VRMS isolation and signaling rates up to 1 Mbps. Note: the datasheet revision history states the ISO1050L device was deleted from this document.

ISO1050LDW

Texas Instruments

Galvanically isolated CAN transceiver meeting ISO11898-2, with up to 5000 VRMS isolation and signaling rates up to 1 Mbps

ISO7420E

Texas Instruments

Low-power dual-channel digital isolator (both channels same direction) with 2500 VRMS / 4242 VPK isolation, >50 Mbps signaling and default-high output

ISO7420FE

Texas Instruments

Low-power dual-channel digital isolator (both channels same direction, default output low) with 2500 VRMS/4242 VPK isolation and >50 Mbps signaling rate

ISO7421

Texas Instruments

Low-power dual-channel digital isolator (ISO7421: channels in opposite directions) with 2500 VRMS/4242 VPK isolation, signaling rate over 50 Mbps and 3-V to 5.5-V operation.

ISO7421E

Texas Instruments

Low-power dual-channel digital isolator with channels in opposite directions, 2500 VRMS (UL 1577) / 4242 VPK (VDE) isolation, signaling rate over 50 Mbps, default output high.

ISO7421E-Q1

Texas Instruments

Low-power dual-channel digital isolator with 2500 VRMS (UL 1577) / 4242 VPK (VDE) isolation, >50 Mbps signaling and 7 ns typical propagation delay; ISO7421 has channels in opposite directions. The Q1 variant is the automotive-qualified vers

ISO7421ED

Texas Instruments

Low-power dual-channel digital isolator with opposite-direction channels (ISO7421), 2500 VRMS/4242 VPK isolation, >50 Mbps signaling, 3-V to 5.5-V supplies, default output high.

ISO7421FCC

Texas Instruments

Low-power dual-channel digital isolator (channels in opposite directions) with 2500 VRMS/4242 VPK isolation, >50 Mbps signaling, and default-low output ('F' suffix).

ISO7421FE

Texas Instruments

Low-power dual-channel digital isolator with opposite-direction channels (ISO7421) and default-low output on loss of input power/signal ('F' suffix), providing 2500 VRMS / 4242 VPK isolation with >50 Mbps signaling.

ISO7421FED

Texas Instruments

Low-power dual-channel digital isolator with opposite-direction channels, default-low output on loss of input, 2500 VRMS/4242 VPK isolation and >50 Mbps signaling rate

ISO7421FEDR

Texas Instruments

Low-power dual-channel digital isolator (opposite-direction channels, default output low) with 2500 VRMS UL 1577 / 4242 VPK VDE isolation and >50 Mbps signaling, 3-V to 5.5-V operation

ISO7710

Texas Instruments

ISO7710 is a robust-EMC, low-power single-channel digital isolator in the ISO77xxD family with SiO2 insulation barrier, providing galvanic isolation up to 4242 VPK and reinforced isolation certified by VDE and CSA.

ISO7721

Texas Instruments

High-speed, robust EMC dual-channel digital isolator (ISO7721: channels in opposite directions) with up to 5000 VRMS isolation and 100 Mbps data rate

ISO7721DR

Texas Instruments

Robust EMC, low-power dual-channel digital isolator with reinforced isolation up to 4242 VPK, isolating CMOS/LVCMOS digital I/Os via a SiO2 barrier; datasheet provided is the ISO77xxD EVM user's guide.

KSZ8081MLXCA-TR

Microchip Technology

Single-chip 10BASE-T/100BASE-TX IEEE 802.3 compliant Ethernet physical-layer transceiver with MII interface, HP Auto MDI/MDI-X, and LinkMD TDR-based cable diagnostics

KSZ8081MNX/RNB28

Microchip Technology

Single-supply 10Base-T/100Base-TX Ethernet physical-layer transceiver with integrated termination resistors and 1.2V core regulator; MNX variant provides MII interface.