Interface ICs Datasheets

MAX232DR

Texas Instruments

The MAX232 device is a dual driver/receiver that includes a capacitive voltage generator to supply TIA/EIA-232-F voltage levels from a single 5-V supply. Each receiver converts TIA/EIA-232-

MAX232XD

Texas Instruments

Dual driver/receiver with on-chip charge pump generating TIA/EIA-232-F levels from a single 5-V supply, operating up to 120 kbit/s

MAX3232

Analog Devices

Dual-driver/dual-receiver true RS-232 transceiver operating from a single 3.0V to 5.5V supply with an on-chip dual charge pump needing four 0.1uF capacitors; guaranteed 120kbps.

MAX3232CAE

Analog Devices

MAX3232CPE

Analog Devices

MAX3232CSE

Analog Devices

MAX3232CUE

Analog Devices

MAX3232CWE

Analog Devices

MAX3232EPE

Analog Devices

MAX3232ESE

Analog Devices

MAX3232EUE

Analog Devices

MAX3232EWE

Analog Devices

MAX3440E

Analog Devices

±15kV ESD-protected, ±60V fault-protected, fail-safe, hot-swappable RS-485 transceiver (250kbps slew-rate-limited) supporting up to 128 nodes on a bus, 5V supply

MAX3441E

Analog Devices

±15kV ESD-protected, ±60V fault-protected, fail-safe RS-485/RS-422 transceiver with hot-swap, guaranteed 10Mbps data rate, supporting up to 128 transceivers on a bus

MAX3442E

Analog Devices

±15kV ESD-protected, ±60V fault-protected, fail-safe, hot-swappable RS-485/RS-422 transceiver with 0.25Mbps data rate, one driver and one receiver, supporting up to 128 transceivers on the bus.

MAX3443E

Analog Devices

±15kV ESD-protected, ±60V fault-protected, fail-safe, hot-swappable RS-485/RS-422 transceiver with 10Mbps data rate and low-power shutdown, supporting up to 128 transceivers on a bus

MAX3444E

Analog Devices

±15kV ESD-protected, ±60V fault-protected, fail-safe, hot-swappable J1708 transceiver with low-power shutdown, 250kbps data rate, supporting up to 128 transceivers on the bus

MAX481

Analog Devices

Low-power half-duplex RS-485/RS-422 transceiver with one driver and one receiver, unlimited slew rate for data rates up to 2.5Mbps, low-current shutdown mode, and a fail-safe receiver input.

MAX483

Analog Devices

Low-power, slew-rate-limited half-duplex RS-485/RS-422 transceiver with one driver and one receiver, supporting up to 250kbps, low-current shutdown mode, and thermal shutdown protection.

MAX485

Analog Devices

Low-power half-duplex RS-485/RS-422 transceiver with one driver and one receiver, 2.5Mbps data rate, 5V supply, thermal shutdown and fail-safe receiver

MAX485C/D

Analog Devices

Low-power half-duplex RS-485/RS-422 transceiver with one driver and one receiver, unlimited slew rate for up to 2.5Mbps, single 5V supply, with fail-safe open-circuit receiver input and thermal shutdown protection.

MAX485CSA

Analog Devices

Low-power half-duplex RS-485/RS-422 transceiver with one driver and one receiver, unlimited slew rate for up to 2.5Mbps, single 5V supply, with fail-safe receiver input and thermal shutdown

MAX485CUA

Analog Devices

Low-power half-duplex RS-485/RS-422 transceiver with one driver and one receiver, unlimited slew rate for up to 2.5Mbps, single 5V supply, with thermal shutdown and fail-safe receiver

MAX485D

Analog Devices

MAX485DR

Analog Devices

MAX485EPA

Analog Devices

Low-power half-duplex RS-485/RS-422 transceiver with one driver and one receiver, non-slew-rate-limited for data rates up to 2.5Mbps, operating from a single 5V supply with fail-safe receiver.

MAX485ESA

Analog Devices

Low-power half-duplex RS-485/RS-422 transceiver with one driver and one receiver, unlimited slew rate for up to 2.5Mbps, single 5V supply

MAX485MJA

Analog Devices

Low-power half-duplex RS-485/RS-422 transceiver with unlimited slew-rate driver (up to 2.5Mbps), one driver and one receiver, single 5V supply, in military temperature range version.

MAX485P

Analog Devices

MAX487

Analog Devices

Low-power, slew-rate-limited half-duplex RS-485/RS-422 transceiver with quarter-unit-load receiver (up to 128 nodes on bus), shutdown mode, and data rates up to 250kbps