Interface ICs Datasheets

MAX488

Analog Devices

Low-power, slew-rate-limited full-duplex RS-485/RS-422 transceiver with one driver and one receiver, supporting data rates up to 250kbps from a single 5V supply.

MAX489

Analog Devices

Full-duplex, slew-rate-limited low-power RS-485/RS-422 transceiver with one driver and one receiver, driver/receiver enable pins and fail-safe receiver input, supporting data rates up to 250kbps

MAX48X/MAX1487

Analog Devices

Low-power half-duplex RS-485/RS-422 transceiver (one driver, one receiver) with quarter-unit-load receiver allowing up to 128 devices on the bus and up to 2.5Mbps data rate.

MAX490

Analog Devices

Low-power, full-duplex RS-485/RS-422 transceiver with one driver and one receiver, unlimited slew rate for data rates up to 2.5Mbps, operating from a single 5V supply.

MAX491

Analog Devices

Low-power full-duplex RS-485/RS-422 transceiver with one driver and one receiver, unlimited slew rate up to 2.5Mbps, with driver/receiver enable pins and low-power shutdown, operating from a single 5V supply.

MCP23017

Microchip Technology

16-bit remote bidirectional I/O port expander with high-speed I2C interface (up to 1.7 MHz), configurable interrupt outputs, and three hardware address pins for up to eight devices on the bus

MCP23S17

Microchip Technology

16-bit remote bidirectional I/O port expander with 10 MHz SPI interface, configurable interrupt outputs, and three hardware address pins for up to eight devices on the bus

MCP23X17

Microchip Technology

16-bit remote bidirectional I/O port expander with I2C (MCP23017) or SPI (MCP23S17) serial interface, configurable interrupt outputs, and hardware address pins

MCP2515

Microchip Technology

Stand-alone CAN V2.0B controller with SPI interface supporting 1 Mb/s, two receive buffers, three transmit buffers, six acceptance filters and two masks.

MCP2515-E/P

Microchip Technology

MCP2515-I/ML

Microchip Technology

CAN Interface IC CAN controller w/SPI interface

MCP2515-I/P

Microchip Technology

MCP2515-I/SO

Microchip Technology

CAN Interface IC W/ SPI Interface

MCP2515-I/ST

Microchip Technology

MCP2515T

Microchip Technology

MCP2515T-E/ML

Microchip Technology

MCP2515T-I/ML

Microchip Technology

MCP2515T-I/SO

Microchip Technology

CAN Interface IC W/ SPI Interface

MCP2515T-I/ST

Microchip Technology

MCP2542WFDT-E

Microchip Technology

High-speed CAN FD transceiver supporting up to 8 Mbps with Wake-Up Pattern (WUP) per ISO 11898-2:2016, VIO pin for 1.8V-5V controller interfacing, AEC-Q100 Grade 0 qualified

MCP2551-E/P

Microchip Technology

Fault-tolerant high-speed CAN transceiver compliant with ISO-11898 that interfaces a CAN protocol controller to the physical bus at up to 1 Mb/s, with slope control, standby mode, and thermal shutdown.

MCP2551-E/SN

Microchip Technology

Fault-tolerant high-speed CAN transceiver interfacing a CAN protocol controller to the physical bus, ISO-11898 compliant, supporting up to 1 Mb/s with slope control and standby mode

MCP2551-I/P

Microchip Technology

High-speed, fault-tolerant CAN transceiver compliant with ISO-11898 that interfaces a CAN protocol controller to the physical bus, supporting up to 1 Mb/s with slope control and standby mode.

MCP2551-I/SN

Microchip Technology

High-speed, fault-tolerant CAN transceiver compliant with ISO-11898, supporting up to 1 Mb/s, interfacing a CAN protocol controller to the physical bus, with slope control and standby modes.

MCP2551T

Microchip Technology

High-speed, fault-tolerant CAN transceiver compliant with ISO-11898, supporting up to 1 Mb/s with slope control and standby mode; tape-and-reel version of MCP2551.

MCP2551T-I/SN

Microchip Technology

High-speed, fault-tolerant CAN transceiver interfacing a CAN protocol controller to the physical bus, ISO-11898 compliant, operating up to 1 Mb/s.

PCA9546ADGVR

NXP Semiconductors

Quad bidirectional translating I2C/SMBus switch with active-low reset, three address pins, and voltage-level translation between 1.8-V, 2.5-V, 3.3-V, and 5-V buses

PCA9546ADGVT

NXP Semiconductors

Quad bidirectional translating switch controlled via I2C/SMBus with active-low reset, allowing voltage-level translation between 1.8-V, 2.5-V, 3.3-V and 5-V buses

PCA9546ADW

NXP Semiconductors

Quad bidirectional translating switch controlled via I2C/SMBus that fans one upstream SCL/SDA pair out to four downstream channels, with active-low reset and voltage-level translation between 1.8V, 2.5V, 3.3V and 5V buses.

PCA9546ADWR

NXP Semiconductors

Quad bidirectional translating I2C/SMBus switch with active-low reset, controlled via I2C bus, enabling voltage-level translation between 1.8V, 2.5V, 3.3V and 5V buses