Interface ICs Datasheets
248 Interface ICs datasheets read into specs, pinouts and ratings. Parts from Texas Instruments, Microchip Technology and Analog Devices.
Interface ICs datasheets, page 8
248 parts · page 8 of 9. Most used first, then by part number.
SP3232E
MaxLinear
SP3485
MaxLinear
+3.3V low power half-duplex RS-485/RS-422 transceiver with 10Mbps data rate, -7V to +12V common-mode range, and low-power shutdown mode
SP3485EN-L
MaxLinear
3.3V low-power half-duplex RS-485/RS-422 transceiver with 10Mbps data rate, driver/receiver enable, and low-power shutdown mode
TCA6424A
Texas Instruments
24-bit I/O expander for I2C and SMBus, providing remote GPIO expansion and bidirectional voltage-level translation between different voltage domains (1.8V to 5V).
TCA6424ARGJR.A
Texas Instruments
Low-voltage 24-bit I2C/SMBus GPIO expander with level translation, interrupt output, active-low reset, and configuration/polarity registers
TCA6424ARGJR.B
Texas Instruments
Low-voltage 24-bit I2C and SMBus GPIO expander with voltage-level translation, interrupt output, active-low reset, and configuration registers
TCA9548A
Texas Instruments
Low-voltage 1-to-8 bidirectional translating I2C/SMBus switch with active-low reset and three address pins, enabling resolution of I2C address conflicts and voltage-level translation between 1.8V, 2.5V, 3.3V and 5V buses.
TCAN1043ADYYRQ1
Texas Instruments
CAN Interface IC Automotive CAN FD tr ansceiver with wake
TCAN1043NDYYRQ1
Texas Instruments
CAN Interface IC Automotive CAN FD tr ansceiver with wake
TCAN1046AV-Q1
Texas Instruments
AEC-Q100 Grade 1 dual high-speed CAN FD transceiver with 1.8-V I/O level shifting, independent standby mode control per channel, and ±58 V bus fault protection; TCAN1046AV-Q1 uses active-high STB pins.
TCAN1048AV-Q1
Texas Instruments
AEC-Q100 Grade 1 dual high-speed CAN FD transceiver with independent standby mode control, 1.8-V I/O support, and ±58 V bus fault protection; TCAN1048AV-Q1 variant has active-low nSTB pins.
TCAN330DCNT
Texas Instruments
3.3V CAN transceiver compatible with ISO 11898-2, supporting up to 1Mbps with shutdown and silent modes, ±12kV IEC ESD protection and ±14V bus fault protection
TCAN330DR.B
Texas Instruments
3.3V ISO 11898-2 compliant high-speed CAN transceiver with shutdown and silent modes, supporting data rates up to 1Mbps (5Mbps for G variants), with bus fault protection of ±14V and ±25kV HBM ESD on bus pins.
TJA1050T
NXP Semiconductors
High-speed CAN transceiver interfacing a CAN protocol controller to the physical bus, ISO 11898 compliant, up to 1 Mbaud, with low EME, silent mode and TXD dominant time-out
TPS65988
Texas Instruments
Dual port USB Type-C and USB Power Delivery controller with integrated 20V/5A source and sink power paths, supporting USB3 and alternate modes such as DisplayPort
TUSB8041-Q1
Texas Instruments
Four-port USB 3.0 hub controller supporting SuperSpeed, high-speed, full-speed, and low-speed connections with integrated battery charging modes.
TUSB8041I
Texas Instruments
Four-port USB 3.0 hub supporting SuperSpeed, high-speed, full-speed and low-speed connections, with battery charging support and OTP/EEPROM/I2C-SMBus configuration (industrial temperature variant TUSB8041I).
TUSB8041IRGCR
Texas Instruments
Four-port USB 3.0 hub controller supporting SuperSpeed, high-speed, full-speed, and low-speed connections
TUSB8041IRGCR.A
Texas Instruments
Four-port USB 3.0 hub controller providing SuperSpeed, high-speed, full-speed and low-speed connections with battery charging support and OTP/EEPROM/I2C configuration
TUSB8041IRGCT
Texas Instruments
Four-port USB 3.0 hub controller with battery charging support and multiple configuration interfaces
TUSB8041IRGCT.A
Texas Instruments
Four-port USB 3.0 hub controller providing SuperSpeed USB connectivity and integrated battery charging support.
TUSB8041RGCR.A
Texas Instruments
Four-port USB 3.0 hub providing simultaneous SuperSpeed and high-speed/full-speed upstream connectivity, with SuperSpeed, high-speed, full-speed, or low-speed downstream ports, battery charging support, and OTP/EEPROM/I2C configuration.
TUSB8041RGCT
Texas Instruments
A four-port USB 3.0 hub supporting SuperSpeed, high-speed, full-speed, and low-speed connections with integrated battery charging support.
TUSB8041RGCT.A
Texas Instruments
A four-port USB 3.0 hub controller providing simultaneous SuperSpeed, high-speed, full-speed, and low-speed connections.
TXB0108
Texas Instruments
8-bit noninverting bidirectional voltage-level translator with auto-direction sensing, translating between 1.2V-3.6V (A port) and 1.65V-5.5V (B port) with ±15kV ESD protection on B port
TXS0102
Texas Instruments
Two-bit non-inverting bidirectional voltage-level translator for open-drain and push-pull applications
TXS0104EPWR
Texas Instruments
IC XLTR VL BIDIR 14-TSSOP
TXS0108
Texas Instruments
8-bit non-inverting bi-directional voltage-level translator for open-drain and push-pull applications
TXS0108E-Q1
Texas Instruments
Automotive-qualified 8-bit non-inverting bidirectional level-shifting voltage translator for open-drain and push-pull applications with no direction-control signal needed
TXS0108EDGSR
Texas Instruments
8-bit non-inverting bi-directional voltage level translator with auto-direction sensing and separate configurable power-supply rails.