Skip to main content

We use cookies to understand how you use our site and improve your experience. See our Privacy Policy.

TJA1050T

High speed CAN transceiver

The TJA1050T is a high speed can transceiver from NXP Semiconductors. View the full TJA1050T datasheet below including key specifications.

TJA1050T shares its datasheet with TJA1050, whose page lists every part number it covers.

Official TJA1050T datasheet (PDF) — the source this page was extracted from.

Manufacturer

NXP Semiconductors

Package

SO-8

TJA1050T Key Specifications

ParameterValue
Data Rateup to 1 Mbaud (60 kbaud to 1 Mbaud)
InterfaceCAN (ISO 11898), TXD/RXD
Number Of Nodesat least 110
Operating Modeshigh-speed mode, silent mode
CANH/CANL DC Voltage-27V to 40V
Supply Voltage (VCC)4.75V to 5.25V
TXD Dominant Time-Out250 to 750 µs
ESD (Human Body Model)±4000V
Logic Input Compatibility3.3V and 5V
Supply Current (Dominant)25 to 75 mA
Supply Current (Recessive)2.5 to 10 mA
Propagation Delay TXD To RXD250 ns max
Thermal Shutdown Temperature165°C typ
Virtual Junction Temperature-40°C to 150°C
Differential Bus Input Voltage (Dominant)1.5V to 3V
Thermal Resistance (Junction-Ambient, SO8)145 K/W

TJA1050T Overview

Part: TJA1050

Type: High speed CAN transceiver

Description: High speed CAN transceiver with very low electromagnetic emission, improved unpowered node behavior, and bus pins protected against automotive transients, supporting baud rates from 60 kbaud up to 1 Mbaud.

Operating Conditions:

  • Supply voltage: 4.75–5.25 V
  • Operating temperature: -40 to +150 °C (virtual junction temperature)
  • Baud rate: 60 kbaud up to 1 Mbaud

Absolute Maximum Ratings:

  • Max supply voltage: +6 V
  • Max junction/storage temperature: +150 °C

Key Specs:

  • Supply current (dominant): 75 mA (max, V TXD = 0 V)
  • Supply current (recessive): 10 mA (max, V TXD = V CC)
  • Differential bus input voltage (dominant): 1.5–3 V (V TXD = 0 V)
  • Propagation delay TXD to RXD: 250 ns (max, V S = 0 V)
  • Differential receiver threshold voltage: 0.5–0.9 V
  • TXD dominant time-out: 250–750 μs (V TXD = 0 V)
  • Short-circuit output current (CANH): -95 mA (max, V CANH = 0 V, V TXD = 0 V)
  • Short-circuit output current (CANL): 100 mA (max, V CANL = 36 V, V TXD = 0 V)

Features:

  • Fully compatible with the 'ISO 11898' standard
  • High speed (up to 1 Mbaud)
  • Very low ElectroMagnetic Emission (EME)
  • Differential receiver with wide common-mode range for high ElectroMagnetic Immunity (EMI)
  • An unpowered node does not disturb the bus lines
  • Transmit Data (TXD) dominant time-out function
  • Silent mode in which the transmitter is disabled
  • Bus pins protected against transients in an automotive environment
  • Input levels compatible with 3.3 V and 5 V devices
  • Thermally protected
  • Short-circuit proof to battery and to ground
  • At least 110 nodes can be connected.

Applications:

  • High-speed automotive applications
  • Nodes in a power-down situation in partially powered networks

Package:

  • SO8 (plastic small outline package; 8 leads; body width 3.9 mm)
  • Bare die (die dimensions 1700 · 1280 · 380 m m)

TJA1050T Features

  • Fully compatible with the 'ISO 11898' standard
  • High speed (up to 1 Mbaud)
  • Very low ElectroMagnetic Emission (EME)
  • Differential receiver with wide common-mode range for high ElectroMagnetic Immunity (EMI)
  • An unpowered node does not disturb the bus lines
  • Transmit Data (TXD) dominant time-out function
  • Silent mode in which the transmitter is disabled
  • Bus pins protected against transients in an automotive environment
  • Input levels compatible with 3.3 V and 5 V devices
  • Thermally protected
  • Short-circuit proof to battery and to ground
  • At least 110 nodes can be connected.

TJA1050T Thermal Information

According to IEC 60747-1.

SYMBOLPARAMETERCONDITIONSVALUEUNIT
R th(vj-a)thermal resistance from junction to ambient in SO8 packagein free air145K/W
R th(vj-s)thermal resistance from junction to substrate of bare diein free air50K/W

TJA1050T Package Information

SO8: plastic small outline package; 8 leads; body width 3.9 mm

TJA1050

Other Interface ICs

  • TCA6424ARGJR – Texas Instruments, I2C and SMBus I/O Expander
  • BQ25895 – Texas Instruments, I2C Controlled Single Cell 5-A Fast Charger with MaxChargeTM for High Input Voltage and Adjustable Voltage 3.1-A Boost Operation
  • CH340N – WCH, USB to Serial Bridge IC
  • INA226 – Texas Instruments, 16-Bit I2C Current, Voltage, and Power Monitor
  • CH340C – WCH, USB to serial chip
  • SE050C2HQ1/Z01SDZ – NXP Semiconductors, IoT Secure Element
  • ADM3053BRWZ – Analog Devices, Signal and Power Isolated CAN Transceiver
  • ADM3053BRWZ-REEL7 – Analog Devices, Signal and Power Isolated CAN Transceiver

All Interface ICs datasheetsAll NXP Semiconductors datasheets (210)

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the TJA1050T

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the TJA1050T run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.