Interface ICs Datasheets
248 Interface ICs datasheets read into specs, pinouts and ratings. Parts from Texas Instruments, Microchip Technology and Analog Devices.
Interface ICs datasheets, page 7
248 parts · page 7 of 9. Most used first, then by part number.
PCA9546ADWT
NXP Semiconductors
Quad bidirectional translating switch controlled via I2C/SMBus, fanning one upstream SCL/SDA pair out to four downstream channels with active-low reset and voltage-level translation between 1.8V, 2.5V, 3.3V and 5V buses.
PCA9546AGQNR
NXP Semiconductors
Quad bidirectional translating I2C/SMBus switch with active-low reset, 1-of-4 channel selection via I2C control register, and voltage-level translation between 1.8V/2.5V/3.3V/5V buses
PCA9546APWR
NXP Semiconductors
Quad bidirectional translating switch controlled via I2C/SMBus with active-low reset, enabling voltage-level translation between 1.8-V, 2.5-V, 3.3-V and 5-V buses
PCA9546APWT
NXP Semiconductors
Quad bidirectional translating switch controlled via I2C/SMBus that fans one upstream SCL/SDA pair out to four downstream channels, with active-low reset and voltage-level translation between 1.8V, 2.5V, 3.3V and 5V buses.
PCA9546ARGWR
NXP Semiconductors
Quad bidirectional translating I2C/SMBus switch with active-low reset, controlled via I2C, enabling voltage-level translation between 1.8V, 2.5V, 3.3V and 5V buses
PCA9546ARGYR
NXP Semiconductors
Quad bidirectional translating I2C/SMBus switch with active-low reset, three address pins, and voltage-level translation between 1.8-V, 2.5-V, 3.3-V and 5-V buses
PCA9546ARVR
NXP Semiconductors
Quad bidirectional translating I2C/SMBus switch with active-low reset, three address pins, and 1.8V/2.5V/3.3V/5V voltage-level translation
PCA9546AZQNR
NXP Semiconductors
Quad bidirectional translating switch controlled via I2C/SMBus with active-low reset, enabling voltage-level translation between 1.8V, 2.5V, 3.3V and 5V buses
PCF8574
NXP Semiconductors
Remote 8-bit quasi-bidirectional I/O expander controlled via I2C-bus with three hardware address inputs and an active-LOW open-drain interrupt output
RTL8211F
Realtek Semiconductor
Integrated 10/100/1000M Ethernet transceiver (PHY) with RGMII MAC interface, EEE, and Wake-on-LAN support; switching-regulator model.
RTL8211F-CG
Realtek Semiconductor
Highly integrated 10/100/1000M Ethernet transceiver (PHY) compliant with IEEE 802.3 10Base-T, 100Base-TX and 1000Base-T, with RGMII MAC interface (Switching Regulator model)
RTL8211FD
Realtek Semiconductor
Integrated 10/100/1000M Ethernet transceiver (PHY) with RGMII MAC interface; the RTL8211FD variant is the LDO-regulator model
RTL8211FD-CG
Realtek Semiconductor
Highly integrated 10/100/1000M Ethernet transceiver (LDO model) complying with IEEE 802.3 10Base-T, 100Base-TX and 1000Base-T, interfacing to the MAC via RGMII.
RTL8211FDI
Realtek Semiconductor
Integrated 10/100/1000M Ethernet transceiver (PHY) with RGMII MAC interface, industrial grade LDO model
RTL8211FDI-CG
Realtek Semiconductor
Highly integrated industrial-grade Gigabit Ethernet PHY (LDO model) supporting 10Base-T, 100Base-TX and 1000Base-T with an RGMII MAC interface
RTL8211FI
Realtek Semiconductor
Integrated single-port 10/100/1000M Gigabit Ethernet transceiver (PHY) with RGMII MAC interface, industrial-grade switching-regulator variant
SE050C2HQ1/Z01SD
NXP Semiconductors
A turnkey IoT secure element with CC EAL 6+ certification, providing a hardware root of trust, secure credential storage, and hardware-accelerated cryptographic operations.
SE050C2HQ1/Z01SDZ
NXP Semiconductors
SE050 Series 6 V 10 mA 600 mW Surface Mount IoT Secure Element - HX2QFN-20
SI8261AAD-C-IS
Silicon Labs
Si8261AAD-C-IS is a 0.6 A peak, LED-emulator-input isolated gate driver with 5 V UVLO and 5.0 kVrms isolation, a drop-in replacement for opto-coupled gate drivers (cross-reference ACPL-W314).
SI8261ACC-C-IP
Silicon Labs
5 kV LED-emulator-input isolated gate driver with 0.6 A peak output, 12 V UVLO, pin-compatible drop-in upgrade for opto-coupled gate drivers (HCPL-3140 cross reference)
SIT3088E
SIT Semiconductor
Half-duplex RS-485/RS-422 transceiver with 3.0V to 5.5V wide power supply, ±15kV HBM ESD protection, ±15V bus fault tolerance, 1/8 unit load, and data transmission up to 14Mbps.
SIT3088EEPA
SIT Semiconductor
SIT3088EESA
SIT Semiconductor
SIT3088EEUA
SIT Semiconductor
SIT3088ETK
SIT Semiconductor
SIT3088E is a RS-485 transceiver with 3.0V~5.5V wide power supply, bus port ESD protection capacity of over 15kV HBM, bus withstand voltage range of ±15V, half duplex, low power consumption, and fully meet the requirements of TIA / EIA-485
SN74LVC2T45
Texas Instruments
Dual-bit noninverting bus transceiver with configurable dual-rail voltage translation between 1.65V and 5.5V nodes, with VCC isolation and Ioff partial-power-down support
SP232A
MaxLinear
Enhanced single +5V RS-232/V.28 dual driver/receiver with on-chip charge pump, 120Kbps data rate under load and 2kV ESD protection
SP233A
MaxLinear
Enhanced RS-232/V.28 dual driver/dual receiver operating from a single +5V supply; the SP233A integrates the charge pump capacitors so no external capacitors are required, with 120Kbps data rate under load.
SP310A
MaxLinear
Enhanced single +5V RS-232/V.28 line driver/receiver pair with on-chip charge pump, 120Kbps data rate under load, and low-power shutdown mode (18-pin, 2 drivers/2 receivers, TTL tri-state)
SP312A
MaxLinear
Enhanced single +5V RS-232/V.28 line driver/receiver with on-chip charge pump, low-power shutdown, receiver wake-up and TTL tri-state (SP312A variant)