MaxLinear Datasheets

MX74610T

MaxLinear

Zero-Iq smart diode controller that drives an external N-channel MOSFET for reverse polarity protection and OR-ing, with a charge-pump gate driver and 2us reverse-polarity response

MX74610

MaxLinear

Zero-Iq reverse polarity protection smart diode controller that drives an external N-channel MOSFET with an internal charge pump and 2us fast reverse turn-off; usable in OR-ing applications.

MX74610SS

MaxLinear

Controller device designed to drive an external N-Channel MOSFET to emulate an ideal diode rectifier for reverse polarity protection, featuring zero quiescent current (Iq) and fast response.

SP232A

MaxLinear

Enhanced single +5V RS-232/V.28 dual driver/receiver with on-chip charge pump, 120Kbps data rate under load and 2kV ESD protection

SP233A

MaxLinear

Enhanced RS-232/V.28 dual driver/dual receiver operating from a single +5V supply; the SP233A integrates the charge pump capacitors so no external capacitors are required, with 120Kbps data rate under load.

SP310A

MaxLinear

Enhanced single +5V RS-232/V.28 line driver/receiver pair with on-chip charge pump, 120Kbps data rate under load, and low-power shutdown mode (18-pin, 2 drivers/2 receivers, TTL tri-state)

SP312A

MaxLinear

Enhanced single +5V RS-232/V.28 line driver/receiver with on-chip charge pump, low-power shutdown, receiver wake-up and TTL tri-state (SP312A variant)

SP3222E

MaxLinear

SP3232E

MaxLinear

SP3485

MaxLinear

+3.3V low power half-duplex RS-485/RS-422 transceiver with 10Mbps data rate, -7V to +12V common-mode range, and low-power shutdown mode

SP3485CN-L

MaxLinear

IC TRANSCEIVER HALF 1/1 8SOIC

SP3485CN-L/TR

MaxLinear

A 3.3V low power half-duplex transceiver that meets the specifications of the RS-485 and RS-422 serial protocols.

SP3485EN-L

MaxLinear

3.3V low-power half-duplex RS-485/RS-422 transceiver with 10Mbps data rate, driver/receiver enable, and low-power shutdown mode

SP3485EN-L/TR

MaxLinear

IC TXRX 8-SOIC

SP481E

MaxLinear

Enhanced ESD, low-power +5V BiCMOS half-duplex RS-485/RS-422 transceiver with driver/receiver enable and low-power shutdown mode (SP481E), operating up to 10Mbps

SP485

MaxLinear

Enhanced low-power +5V half-duplex RS-485/RS-422 transceiver with +/-15kV ESD protection and up to 10Mbps data rate

SP485E

MaxLinear

Enhanced ESD, low power BiCMOS half-duplex RS-485/RS-422 transceiver for +5V multi-drop operation up to 10Mbps

SP485ECN-L

MaxLinear

Enhanced low-power +5V half-duplex RS-485/RS-422 transceiver with enhanced ESD protection (+/-15kV IEC air discharge) and up to 10Mbps data rate

SP485ECN-L/TR

MaxLinear

IC TRANSCEIVER HALF 1/1 8SOIC

SP485ECP-L

MaxLinear

Enhanced low-power +5V half-duplex RS-485/RS-422 transceiver with +/-15kV IEC1000-4-2 air discharge ESD protection, supporting up to 10Mbps

SP485EEN-L

MaxLinear

Enhanced low power +5V half-duplex RS-485/RS-422 transceiver with enhanced ESD protection (+/-15kV IEC1000-4-2 air discharge) and up to 10Mbps data rate

SP485EEN-L/TR

MaxLinear

IC TXRX 8-SOIC

SP485EEP-L

MaxLinear

Enhanced low-power +5V half-duplex RS-485/RS-422 transceiver with +/-15kV IEC air discharge ESD protection and up to 10Mbps data rate

SP485EMN

MaxLinear

Enhanced low-power +5V half-duplex RS-485/RS-422 transceiver with enhanced ESD protection (±15kV IEC air discharge) supporting data rates up to 10Mbps

SP485EMN-L

MaxLinear

Enhanced ESD, low power +5V BiCMOS half-duplex RS-485/RS-422 transceiver supporting up to 10Mbps, with driver/receiver enable for multi-drop configurations.

SP485EMN-L/TR

MaxLinear

Enhanced ESD, low-power +5V half-duplex RS-485/RS-422 transceiver supporting up to 10Mbps with driver/receiver enable for multi-drop configurations

SPX3819

MaxLinear

SPX3819M5

MaxLinear

500mA positive low-dropout, low-noise linear regulator with 1% initial accuracy, enable input, reverse battery protection, current limit and thermal shutdown

SPX3819M5-L-1-2

MaxLinear

SPX3819M5-L-1-5

MaxLinear