Skip to main content

CH32V203C6

32-bit RISC-V Microcontroller

The CH32V203C6 is a 32-bit risc-v microcontroller from WCH. View the full CH32V203C6 datasheet below including electrical characteristics, absolute maximum ratings.

Manufacturer

WCH

Category

32-bit RISC-V Microcontroller

Overview

Part: CH32V203C8T6 — WCH (WCH.cn)

Type: 32-bit RISC-V Microcontroller

Description: Industrial-grade 32-bit RISC-V microcontroller with a QingKe V4B core, operating at up to 144 MHz, featuring up to 224 KB CodeFlash and 64 KB SRAM, dual USB interfaces, CAN, and rich peripherals.

Operating Conditions:

  • Supply voltage: 2.4–3.6 V
  • Operating temperature: -40 to +85 °C
  • CPU clock speed: Max 144 MHz

Absolute Maximum Ratings:

  • Max supply voltage: 3.6 V (VDD, VI/O, VDDA)

Key Specs:

  • Core: QingKe 32-bit RISC-V V4B
  • Max CPU Frequency: 144 MHz
  • Program Memory (CodeFlash): Up to 224 KB
  • Volatile Data Storage (SRAM): Up to 64 KB
  • ADC: 2 units, 12-bit, up to 16 external channels
  • Communication Interfaces: 4x USART, 2x I²C, 2x SPI, 2x USB (Host/Device), 1x CAN
  • GPIO Ports: Up to 51
  • Operating Voltage (VDD): 2.4–3.6 V
  • Operating Temperature: -40 to +85 °C

Features:

  • Fast programmable interrupt controller + hardware interrupt stack
  • Single cycle multiplication, hardware division, hardware FPU
  • Built-in factory-trimmed 8MHz RC oscillator and 40 KHz RC oscillator
  • Power on/down reset, programmable voltage detector
  • 16-channels Touch-Key detection
  • 1 16-bit advanced-control timer, 3 16-bit general-purpose timers, 1 32-bit general-purpose timer (CH32V203RBx)
  • 2 watchdog timers (independent and window)
  • CRC unit, 96-bit unique ID
  • 2-wire serial debug interface (SDI)

Applications:

Package:

  • TSSOP20
  • QFN20
  • QFN28
  • QSOP28
  • LQFP32
  • LQFP48
  • QFN48
  • LQFP64M

Electrical Characteristics

Figure 4-1 Typical circuit for conventional power supply

Absolute Maximum Ratings

Stresses at or above the absolute maximum ratings listed in the table below may cause permanent damage to the device.

Table 4-1 Absolute maximum ratings

SymbolDescriptionMin.Max.Unit
T AAmbient temperature during operation-4085°C
T SAmbient temperature during storage-40125°C
V DD -V SSExternal main supply voltage (includingV DDA and V DD )-0.34.0V
V I/O -V SSI/O domain supply voltage-0.34.0V
V INInput voltage on the FT (5V tolerance) pinV SS -0.35.5V
V INInput voltage on other pinsV SS -0.3V DD +0.3
\△ V DD_x \Variations between different main power supply pins
\△ V I/O_x \Variations between different I/O power supply pins
\△ V SS_x \Variations between different ground pins

33

V ESD(HBM)Electrostatic discharge voltage (human body model, non-contact)4KV
V ESD(HBM)USB pins (PA11, PA12)3KV
I VDDTotal current intoV DD /V DDA /V I/O power lines (source)150mA
I VssTotal current out ofV SS ground lines (sink)150mA
I I/OSink current on any I/O and control pin25mA
I I/OOutput current on any I/O and control pin-25mA
I INJ(PIN)Injected current on NRST pin+/-5mA
I INJ(PIN)Injected current on HSE's OSC_IN pin and LSE's OSC_IN pin+/-5mA
I INJ(PIN)Injected current on other pins+/-5mA
∑ I INJ(PIN)Total injected current on all I/Os and control pins+/-25mA

Related Variants

The following components are covered by the same datasheet.

Part NumberManufacturerPackage
CH32V203WCH
CH32V203C8WCH
CH32V203C8T6WCH
CH32V203C8U6WCH
CH32V203F6WCH
CH32V203F8WCH
CH32V203G6WCH
CH32V203G8WCH
CH32V203K6WCH
CH32V203K8WCH
CH32V203RBWCH
Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Get structured datasheet data via API

Get started free