ESP32-S31NRV32
Wi-Fi 6 / Bluetooth 5.4 / 802.15.4 Wireless SoC (RISC-V MCU)The ESP32-S31NRV32 is a wi-fi 6 / bluetooth 5.4 / 802.15.4 wireless soc (risc-v mcu) from Espressif Systems. View the full ESP32-S31NRV32 datasheet below including key specifications, pinout, electrical characteristics, absolute maximum ratings.
Official ESP32-S31NRV32 datasheet (PDF) — the source this page was extracted from.
ESP32-S31NRV32 Key Specifications
| Parameter | Value |
|---|---|
| ADC | Two 12-bit SAR ADCs, up to 16 channels |
| CPU | Dual-core 32-bit RISC-V up to 320 MHz (HP) + single-core 32-bit RISC-V up to 40 MHz (LP) |
| DAC | One DAC with two output channels |
| I2C | 2 + 1 LP I2C |
| I2S | 2 |
| ROM | 320 KB |
| SPI | 2 general-purpose + 2 MSPI + 1 LP SPI |
| USB | USB 2.0 High-Speed OTG + USB Serial/JTAG |
| UART | 4 + 1 LP UART |
| GPIOs | 60 |
| Wi-Fi | 2.4 GHz IEEE 802.11ax (Wi-Fi 6) and 802.11b/g/n, 1T1R, up to 150 Mbps |
| CAN FD | 2 controllers (ISO 11898-1:2015) |
| HP SRAM | 512 KB |
| LP SRAM | 32 KB |
| 802.15.4 | Zigbee 3.0, Thread 1.4, Matter, 250 Kbps |
| Ethernet | 1000 Mbps MAC |
| Bluetooth | Bluetooth 5.4 (LE) and Bluetooth Classic |
| In-Package PSRAM | 32 MB Octal SPI (250 MHz 8-bit DDR) |
| Package Dimensions | 8 x 8 mm |
| TX Power (802.11b) | up to +21 dBm |
| TX Power (802.11ax) | up to +20 dBm |
| Ambient Temperature Range | -40°C to 85°C |
| Bluetooth LE RX Sensitivity | -105 dBm (125 Kbps) |
ESP32-S31NRV32 Overview
Part: ESP32-S31NRV32 — Espressif Systems
Type: Wi-Fi 6 / Bluetooth 5.4 / 802.15.4 multi-protocol wireless SoC (RISC-V MCU)
Description: Dual-core 32-bit RISC-V MCU at up to 320 MHz with an LP RISC-V core at up to 40 MHz, 2.4 GHz Wi-Fi 6, Bluetooth 5.4 (LE) and Classic, and 802.15.4 (Zigbee/Thread), with 32 MB in-package PSRAM and 60 GPIOs.
Operating Conditions:
- Supply voltage: see Section 5.2 Recommended Power Supply Characteristics (not included in the provided text)
- Operating temperature: -40 to 85 °C (ambient)
- HP CPU up to 320 MHz; LP CPU up to 40 MHz
- External PSRAM interface: 250 MHz 8-bit DDR (in-package only)
Absolute Maximum Ratings:
- Input power pins voltage: -0.3 to 3.6 V
- Cumulative IO output current: 1500 mA
- Storage temperature: -40 to 150 °C
Key Specs:
- CPU: dual-core RISC-V up to 320 MHz, 2195.20 CoreMark (6.86 CoreMark/MHz)
- Memory: 512 KB HP SRAM, 32 KB LP SRAM, 320 KB ROM, 32 MB in-package Octal PSRAM
- Wi-Fi: 1T1R 2.4 GHz, 802.11ax (20 MHz non-AP) and 802.11b/g/n, up to 150 Mbps
- Wi-Fi TX power: up to +21 dBm (802.11b), up to +20 dBm (802.11ax)
- Bluetooth LE: 5.4, 125 Kbps to 2 Mbps, sensitivity up to -105 dBm (125 Kbps)
- 802.15.4: 250 Kbps OQPSK, Thread 1.4, Zigbee 3.0
- GPIOs: 60 programmable
- ADC: two 12-bit SAR ADCs, up to 16 channels; one DAC with two channels
Features:
- Wi-Fi 6 with OFDMA, downlink MU-MIMO, TWT, and 802.11mc FTM
- Bluetooth LE with LE Audio, Mesh 1.1, and Direction Finding; Bluetooth Classic (Power Class 1)
- Matter, Thread, and Zigbee support
- USB 2.0 High-Speed OTG, USB Serial/JTAG, 1000 Mbps Ethernet MAC
- Two CAN FD controllers, SD/MMC host with two slots
- JPEG codec, PPA, ASRC, CORDIC, LCD and camera controller
- 4 UARTs plus LP UART, 2 I2C plus LP I2C, 2 I2S, 2 general-purpose SPI plus LP SPI
- Touch sensor, temperature sensor, analog comparator
- Security: AES, ECC, HMAC, RSA, SHA, RSA/ECDSA digital signature, XTS_AES flash/PSRAM encryption, secure boot, TEE/APM, DPA resistance, power glitch detector
Applications:
- Smart home
- Industrial automation
- Health care
- Consumer electronics
- Smart agriculture
- Audio devices
- Cameras for video streaming
- Speech and image recognition
- Wi-Fi + Bluetooth networking card
- Touch and proximity sensing
Package:
- QFN80 (8 × 8 mm)
ESP32-S31NRV32 Features
- A full-switching matrix between HP peripheral input/output signals and the GPIO pins
- 211 HP peripheral input signals sourced from the input of any GPIO pins
- 210 HP peripheral output signals routed to the output of any GPIO pins
- Signal synchronization for HP peripheral inputs based on HP IO MUX operating clock
- GPIO Filter hardware for input signal filtering
- Glitch Filter hardware for second-time filtering on input signal
- Sigma delta modulated (SDM) output
- GPIO simple input and output
- HP GPIO Wakeup
- GMAC/SDIO dedicated GPIO wakeup - see ESP32-S31 Technical Reference Manual > Chapter CNNT Dedicated GPIO Wakeup (PMU EXT-IO Wakeup)
ESP32-S31NRV32 Applications
With low power consumption, ESP32-S31 is an ideal choice for IoT devices in the following areas:
- Smart Home
- Industrial Automation
- Health Care
- Consumer Electronics
- Smart Agriculture
- POS Machines
- Service Robot
- Audio Devices
- Generic Low-power IoT Sensor Hubs
- Generic Low-power IoT Data Loggers
- Cameras for Video Streaming
- USB Devices
- Speech Recognition
- Image Recognition
- Wi-Fi + Bluetooth Networking Card
- Touch and Proximity Sensing
Check the link or the QR code to make sure that you use the latest version of this document:
https://www.espressif.com/documentation/esp32-s31_datasheet_en.pdf
ESP32-S31NRV32 Pin Configuration
Package: QFN-80 (8x8 mm) — ESP32-S31NRV32
| Pin Number | Pin Name | Type | Description / Alternate Functions |
|---|---|---|---|
| 1 | VBAT | P | Power supply |
| 2 | VDDA | P | Analog power supply |
| 3 | VDDA | P | Analog power supply |
| 4 | XTAL_P | Analog | Crystal oscillator input/output |
| 5 | XTAL_32K_N/GPIO0 | I/O | GPIO0; XTAL_32K_N (P2) |
| 6 | XTAL_32K_P/GPIO1 | I/O | GPIO1; XTAL_32K_P (P2) |
| 7 | GPIO2 | I/O | GPIO2 (P2); LP_GPIO2 / SPI0 options per Table 2-8 |
| 8 | GPIO3 | I/O | GPIO3 (P2) |
| 9 | GPIO4 | I/O | GPIO4 (P2); TOUCH_CH0 / SAC_CH0 |
| 10 | GPIO5 | I/O | GPIO5 (P2); TOUCH_CH1 / SAC_CH1 |
| 11 | VDDSPI | P | SPI flash/PSRAM supply |
| 12 | GPIO6 | I/O | GPIO6 (P2); TOUCH_CH2 |
| 13 | GPIO7 | I/O | GPIO7 (P2); TOUCH_CH3 |
| 14 | GPIO8 | I/O | GPIO8 (P2); TOUCH_CH4 |
| 15 | GPIO9 | I/O | GPIO9 (P2); TOUCH_CH5 |
| 16 | GPIO10 | I/O | GPIO10 (P2); TOUCH_CH6 |
| 17 | GPIO11 | I/O | GPIO11 (P2); TOUCH_CH7 |
| 18 | GPIO12 | I/O | GPIO12 (P2); TOUCH_CH8 |
| 19 | GPIO13 | I/O | GPIO13 (P2); TOUCH_CH9 |
| 20 | GPIO14 | I/O | GPIO14 (P2); TOUCH_CH10 |
| 21 | GPIO15 | I/O | GPIO15 (P2); TOUCH_CH11 |
| 22 | GPIO16 | I/O | GPIO16 (P2); TOUCH_CH12 |
| 23 | GPIO17 | I/O | GPIO17 (P2); TOUCH_CH13 |
| 24 | GPIO18 | I/O | GPIO18 (P2); SDIO_DATA0 |
| 25 | GPIO19 | I/O | GPIO19 (P2); SDIO_DATA1 |
| 26 | GPIO20 | I/O | GPIO20 (P2); SDIO_DATA2 |
| 27 | GPIO21 | I/O | GPIO21 (P2); SDIO_DATA3 |
| 28 | VDD_PSRAM_SPI_1 | P | PSRAM supply |
| 29 | GPIO22 | I/O | GPIO22 (P2); SDIO_CMD |
| 30 | GPIO23 | I/O | GPIO23 (P2); SDIO_CLK |
| 31 | GPIO24 | I/O | GPIO24 (P2); SDIO_CMD |
| 32 | VDD_PSRAM_SPI_2 | P | PSRAM supply |
| 33 | VDD_LDO_SPI | P | SPI LDO supply |
| 34 | GPIO25 | I/O | GPIO25 (P4); SPICS1 |
| 35 | GPIO26 | I/O | GPIO26 (P4); SPI0/1 flash pin |
| 36 | GPIO27 | I/O | GPIO27 (P4); SPI0/1 flash pin |
| 37 | GPIO28 | I/O | GPIO28 (P4); SPI0/1 flash pin |
| 38 | VDD_SPI | P | SPI supply |
| 39 | GPIO29 | I/O | GPIO29 (P4); SPID |
| 40 | GPIO30 | I/O | GPIO30 (P4); SPICLK |
| 41 | GPIO31 | I/O | GPIO31 (P4); SPIQ |
| 42 | GPIO32 | I/O | GPIO32 (P4); SPIHD |
| 43 | VDD_SPI/VDDPST_2 | P | Digital I/O supply |
| 44 | VDD_DP | P | USB D+ supply |
| 45 | VDD_DM | P | USB D- supply |
| 46 | GPIO33 | I/O | GPIO33 (P3); USB Serial/JTAG D- |
| 47 | GPIO34 | I/O | GPIO34 (P3); USB Serial/JTAG D+ |
| 48 | GPIO35 | I/O | GPIO35 (P2) |
| 49 | GPIO36 | I/O | GPIO36 (P3); strapping pin |
| 50 | GPIO37 | I/O | GPIO37 (P3); strapping pin |
| 51 | GPIO38 | I/O | GPIO38 (P2) |
| 52 | GPIO39 | I/O | GPIO39 (P2) |
| 53 | GPIO40 | I/O | GPIO40 (P2) |
| 54 | VDDPST_3 | P | Digital I/O supply |
| 55 | GPIO41 | I/O | GPIO41 (P2) |
| 56 | GPIO42 | I/O | GPIO42 (P2) |
| 57 | GPIO43 | I/O | GPIO43 (P2) |
| 58 | GPIO44 | I/O | GPIO44 (P2) |
| 59 | GPIO45 | I/O | GPIO45 (P2) |
| 60 | GPIO46 | I/O | GPIO46 (P2) |
| 61 | GPIO47 | I/O | GPIO47 (P2) |
| 62 | GPIO48 | I/O | GPIO48 (P2) |
| 63 | GPIO49 | I/O | GPIO49 (P2) |
| 64 | VBAT_ADC | P | ADC supply |
| 65 | GPIO50 | I/O | GPIO50 (P2) |
| 66 | GPIO51 | I/O | GPIO51 (P2) |
| 67 | GPIO52 | I/O | GPIO52 (P2) |
| 68 | GPIO53 | I/O | GPIO53 (P2) |
| 69 | GPIO54 | I/O | GPIO54 (P3); JTAG |
| 70 | GPIO55 | I/O | GPIO55 (P3); JTAG |
| 71 | GPIO56 | I/O | GPIO56 (P3); JTAG |
| 72 | GPIO57 | I/O | GPIO57 (P3); JTAG |
| 73 | GPIO58 | I/O | GPIO58 (P3); UART0 |
| 74 | GPIO59 | I/O | GPIO59 (P3); UART0 |
| 75 | GPIO60 | I/O | GPIO60 (P3); strapping pin |
| 76 | GPIO61 | I/O | GPIO61 (P3); strapping pin |
| 77 | VDD3P3_CPU | P | CPU supply |
| 78 | XTAL_N | Analog | Crystal oscillator input/output |
| 79 | XTAL_P | Analog | Crystal oscillator input/output |
| 80 | VDD3P3 | P | Supply |
| — | EPAD | GND | Exposed ground pad |
Notes
- Pin numbers for this QFN-80 package were read from the attached pin diagram; the name-to-number pairing may contain errors at low image resolution, so verify against the package drawing before layout.
- Priority levels per Table 2-8: P2 = free use; P3 = use with caution (strapping, USB Serial/JTAG, JTAG, UART0); P4 = allocated/not recommended (off-package flash SPI).
- Some pin names above (e.g., VBAT, VDDA, VDD3P3) are partially inferred from the diagram and should be double-checked against the source.
- Analog/RF and power pin functions beyond those listed should be confirmed against the full datasheet.
ESP32-S31NRV32 Electrical Characteristics
The values presented in this section are preliminary and may change with the final release of this datasheet.
ESP32-S31NRV32 Absolute Maximum Ratings
Stresses above those listed in T able 5-1 Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only and normal operation of the device at these or any other conditions beyond those indicated in Section 5.2 Recommended Power Supply Characteristics is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
Table 5-1. Absolute Maximum Ratings
| Parameter | Description | Min | Max | Unit |
|---|---|---|---|---|
| Input power pins 1 | Allowed input voltage | - 0.3 | 3.6 | V |
| I output 2 | Cumulative IO output current | - | 1500 | mA |
| T STORE | Storage temperature | - 40 | 150 | °C |
ESP32-S31NRV32 Ordering Information
| Part Number | Ambient Temp. (°C) | In-Package PSRAM | Package |
|---|---|---|---|
| ESP32-S31NRV8 | -40 ~ 85 | 8 MB (Octal SPI) | QFN80 (8×8 mm) |
| ESP32-S31NRV16 | -40 ~ 85 | 16 MB (Octal SPI) | QFN80 (8×8 mm) |
| ESP32-S31NRV32 | -40 ~ 85 | 32 MB (Octal SPI) | QFN80 (8×8 mm) |
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| ESP32 | Espressif Systems | ESP32-WROOM-32E (18.0 x 25.5 x 3.1 mm) |
| ESP32-S31 | Espressif Systems | — |
| ESP32-S31NRV16 | Espressif Systems | QFN80 (8×8 mm) |
| ESP32-S31NRV8 | Espressif Systems | QFN80 (8×8 mm) |
Other Microcontrollers (MCU)
- STM32F407VET6 – STMicroelectronics, ARM Cortex-M4 MCU
- RP2040 – Raspberry Pi, Microcontroller
- NRF52840-QIAA-R7 – Nordic Semiconductor, Wireless Microcontroller
- STM32L011F4U6 – STMicroelectronics, Ultra-low-power Arm Cortex-M0+ MCU
- STM32U575RIT6 – STMicroelectronics, Ultra-low-power Arm Cortex-M33 32-bit MCU
- GD32F103C8T6 – GigaDevice, Arm Cortex-M3 32-bit MCU
- GD32F407VGT6 – GigaDevice, 32-bit ARM Cortex-M4 Microcontroller
- CH32H417QEU6 – WCH, Dual-Core RISC-V Microcontroller
All Microcontrollers (MCU) datasheetsAll Espressif Systems datasheets (99)
Ask your AI agent about the ESP32-S31NRV32
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the ESP32-S31NRV32 run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.