Skip to main content

We use cookies to understand how you use our site and improve your experience. See our Privacy Policy.

ESP32-S31NRV16

Wi-Fi 6 / Bluetooth 5.4 / 802.15.4 Wireless SoC (RISC-V MCU)

The ESP32-S31NRV16 is a wi-fi 6 / bluetooth 5.4 / 802.15.4 wireless soc (risc-v mcu) from Espressif Systems. View the full ESP32-S31NRV16 datasheet below including key specifications, electrical characteristics, absolute maximum ratings.

ESP32-S31NRV16 shares its datasheet with ESP32-S31NRV32, whose page lists every part number it covers.

Official ESP32-S31NRV16 datasheet (PDF) — the source this page was extracted from.

Manufacturer

Espressif Systems

Category

Wi-Fi 6 / Bluetooth 5.4 / 802.15.4 Wireless SoC (RISC-V MCU)

Package

QFN80 (8×8 mm)

ESP32-S31NRV16 Key Specifications

ParameterValue
ContentsBoard(s)
Frequency2.4GHz
PackagingBulk
RoHSCompliant
Standard Pack Qty252
TypeTransceiver; 802.11 b/g/n (Wi-Fi, WiFi, WLAN), Bluetooth® Smart Ready 4.x Dual Mode (BLE)
Utilized IC / PartESP32-WROOM-32E

ESP32-S31NRV16 Overview

Part: ESP32-S31NRV32 — Espressif Systems

Type: Wi-Fi 6 / Bluetooth 5.4 / 802.15.4 multi-protocol wireless SoC (RISC-V MCU)

Description: Dual-core 32-bit RISC-V MCU at up to 320 MHz with an LP RISC-V core at up to 40 MHz, 2.4 GHz Wi-Fi 6, Bluetooth 5.4 (LE) and Classic, and 802.15.4 (Zigbee/Thread), with 32 MB in-package PSRAM and 60 GPIOs.

Operating Conditions:

  • Supply voltage: see Section 5.2 Recommended Power Supply Characteristics (not included in the provided text)
  • Operating temperature: -40 to 85 °C (ambient)
  • HP CPU up to 320 MHz; LP CPU up to 40 MHz
  • External PSRAM interface: 250 MHz 8-bit DDR (in-package only)

Absolute Maximum Ratings:

  • Input power pins voltage: -0.3 to 3.6 V
  • Cumulative IO output current: 1500 mA
  • Storage temperature: -40 to 150 °C

Key Specs:

  • CPU: dual-core RISC-V up to 320 MHz, 2195.20 CoreMark (6.86 CoreMark/MHz)
  • Memory: 512 KB HP SRAM, 32 KB LP SRAM, 320 KB ROM, 32 MB in-package Octal PSRAM
  • Wi-Fi: 1T1R 2.4 GHz, 802.11ax (20 MHz non-AP) and 802.11b/g/n, up to 150 Mbps
  • Wi-Fi TX power: up to +21 dBm (802.11b), up to +20 dBm (802.11ax)
  • Bluetooth LE: 5.4, 125 Kbps to 2 Mbps, sensitivity up to -105 dBm (125 Kbps)
  • 802.15.4: 250 Kbps OQPSK, Thread 1.4, Zigbee 3.0
  • GPIOs: 60 programmable
  • ADC: two 12-bit SAR ADCs, up to 16 channels; one DAC with two channels

Features:

  • Wi-Fi 6 with OFDMA, downlink MU-MIMO, TWT, and 802.11mc FTM
  • Bluetooth LE with LE Audio, Mesh 1.1, and Direction Finding; Bluetooth Classic (Power Class 1)
  • Matter, Thread, and Zigbee support
  • USB 2.0 High-Speed OTG, USB Serial/JTAG, 1000 Mbps Ethernet MAC
  • Two CAN FD controllers, SD/MMC host with two slots
  • JPEG codec, PPA, ASRC, CORDIC, LCD and camera controller
  • 4 UARTs plus LP UART, 2 I2C plus LP I2C, 2 I2S, 2 general-purpose SPI plus LP SPI
  • Touch sensor, temperature sensor, analog comparator
  • Security: AES, ECC, HMAC, RSA, SHA, RSA/ECDSA digital signature, XTS_AES flash/PSRAM encryption, secure boot, TEE/APM, DPA resistance, power glitch detector

Applications:

  • Smart home
  • Industrial automation
  • Health care
  • Consumer electronics
  • Smart agriculture
  • Audio devices
  • Cameras for video streaming
  • Speech and image recognition
  • Wi-Fi + Bluetooth networking card
  • Touch and proximity sensing

Package:

  • QFN80 (8 × 8 mm)

ESP32-S31NRV16 Features

  • A full-switching matrix between HP peripheral input/output signals and the GPIO pins
  • 211 HP peripheral input signals sourced from the input of any GPIO pins
  • 210 HP peripheral output signals routed to the output of any GPIO pins
  • Signal synchronization for HP peripheral inputs based on HP IO MUX operating clock
  • GPIO Filter hardware for input signal filtering
  • Glitch Filter hardware for second-time filtering on input signal
  • Sigma delta modulated (SDM) output
  • GPIO simple input and output
  • HP GPIO Wakeup
  • GMAC/SDIO dedicated GPIO wakeup - see ESP32-S31 Technical Reference Manual > Chapter CNNT Dedicated GPIO Wakeup (PMU EXT-IO Wakeup)

ESP32-S31NRV16 Applications

With low power consumption, ESP32-S31 is an ideal choice for IoT devices in the following areas:

  • Smart Home
  • Industrial Automation
  • Health Care
  • Consumer Electronics
  • Smart Agriculture
  • POS Machines
  • Service Robot
  • Audio Devices
  • Generic Low-power IoT Sensor Hubs
  • Generic Low-power IoT Data Loggers
  • Cameras for Video Streaming
  • USB Devices
  • Speech Recognition
  • Image Recognition
  • Wi-Fi + Bluetooth Networking Card
  • Touch and Proximity Sensing

Check the link or the QR code to make sure that you use the latest version of this document:

https://www.espressif.com/documentation/esp32-s31_datasheet_en.pdf

ESP32-S31NRV16 Pin Configuration

Table 2-8 Peripheral Pin Assignment highlights which pins can be assigned to each peripheral interface according to the following priorities:

  • Priority 1 (P1) : Fixed pins connected directly to peripheral signals via IO MUX, LP IO MUX, or CNNT . If a peripheral interface does not have priority 1 pins, such as UART1-3, it can be assigned to any GPIO pins from priority 2 to priority 4.
  • Any GPIO or LP GPIO pins mapping to peripheral signals via GPIO Matrix or LP GPIO Matrix can be priority 2, 3, or 4.
  • -Priority 2 (P2) : GPIO pins can be freely used without restrictions.
  • -Priority 3 (P3) : GPIO pins should be used with caution, as they may conflict with the following important functions described in Section 2.3.4 Restrictions for GPIOs and LP GPIOs :
  • GPIO36, GPIO37 , GPIO60, GPIO61 : Strapping pins.
  • GPIO33, GPIO34 : USB Serial/JTAG interface.
  • GPIO54, GPIO55, GPIO56, GPIO57 : JTAG interface.
  • GPIO58, GPIO59 : UART0 interface.
  • -Priority 4 (P4) : GPIO pins already allocated or not recommended for use, as described in Section 2.3.4 Restrictions for GPIOs and LP GPIOs :
  • GPIO26, GPIO27 , GPIO28, GPIO30, GPIO31, GPIO32 : SPI0/1 interface pins recommended for connecting off-package flash.

If a peripheral interface does not have priority 2 to 4 pins, such as USB Serial/JTAG, it means it can be assigned only to priority 1 pins.

  • For details about which peripheral signals are connected to IO MUX, LP IO MUX, or CNNT pins, please refer to Section 2.3.1 IO MUX Functions or Section 2.3.2 LP IO MUX Functions .
  • For details about which peripheral signals can be assigned to GPIO or LP GPIO pins, please refer to ESP32-S31 Technical Reference Manual > Chapter GPIO Matrix and IO MUX > Section Peripheral Signal List.

31

ESP32-S31NRV16 Electrical Characteristics

The values presented in this section are preliminary and may change with the final release of this datasheet.

ESP32-S31NRV16 Absolute Maximum Ratings

Stresses above those listed in T able 5-1 Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only and normal operation of the device at these or any other conditions beyond those indicated in Section 5.2 Recommended Power Supply Characteristics is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

Table 5-1. Absolute Maximum Ratings

ParameterDescriptionMinMaxUnit
Input power pins 1Allowed input voltage- 0.33.6V
I output 2Cumulative IO output current-1500mA
T STOREStorage temperature- 40150°C

Variants on the same datasheet

These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.

Part NumberManufacturerPackage
ESP32Espressif SystemsESP32-WROOM-32E (18.0 x 25.5 x 3.1 mm)
ESP32-S31Espressif Systems—
ESP32-S31NRV32Espressif SystemsQFN-80 8x8mm
ESP32-S31NRV8Espressif SystemsQFN80 (8×8 mm)

More datasheets

All Espressif Systems datasheets (99)

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the ESP32-S31NRV16

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the ESP32-S31NRV16 run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.