CH213KS
Low Dropout Ideal Diode ChipThe CH213KS is a low dropout ideal diode chip from WCH. View the full CH213KS datasheet below including key specifications, electrical characteristics, absolute maximum ratings.
CH213KS shares its datasheet with CH213, whose page lists every part number it covers.
Official CH213KS datasheet (PDF) — the source this page was extracted from.
CH213KS Key Specifications
| Parameter | Value |
|---|---|
| ESD (HBM) | 2kV |
| Quiescent Current | 3.6μA typ, 10μA max (5V) |
| Supply Voltage Range | 2.2V to 5.5V |
| Typical Voltage Drop | 32mV at 200mA, 80mV at 500mA, 160mV at 1A (5V) |
| Short-Circuit Current | 250mA typ (5V) |
| Typical On-Resistance | 160mΩ (Iout=500mA, 5V) |
| Load Capacitance Range | 0.0001μF to 500μF |
| Maximum Power Dissipation | 400mW |
| Over-Temperature Shutdown | 130°C rising, 100°C falling (5V) |
| Overcurrent Response Time | 10μS typ, 60μS max |
| Storage Temperature Range | -55°C to 150°C |
| Operating Temperature Range | -40°C to 85°C |
| Ideal Diode On-Current Range | 0 to 900mA (5V) |
| Current Limit Threshold (Imax) | 1.05A to 1.6A (typ 1.3A at 5V) |
CH213KS Overview
Part: CH213 — wch-ic.com
Type: Low Dropout Ideal Diode
Description: Low dropout ideal diode chip with current limiting, overcurrent, short-circuit, over-temperature, and power supply polarity protection, supporting up to 1A current at 5V with a typical 160mΩ on-resistance.
Operating Conditions:
- Supply voltage: 2.2–5.5 V
- Operating temperature: -40 to 85 °C
- Max on-current: 900 mA (at 5V)
- Current limit: 1.3 A (typical at 5V)
Absolute Maximum Ratings:
- Max supply voltage: 6.5 V (VI pin to GND)
- Max junction/storage temperature: 150 °C
Key Specs:
- Power switching tube on-resistance: Typ 160 mΩ (Iout=500mA, VI/VO=5V, TA=25°C)
- Voltage drop: Typ 32 mV (Iout=200mA, VI/VO=5V, TA=25°C)
- Quiescent operating current: Typ 3.6 μA (VI/VO=5V, TA=25°C)
- Current limit threshold: Typ 1.3 A (VI/VO=5V, TA=25°C)
- Short-circuit current: Typ 250 mA (VI/VO=5V, TA=25°C)
- Over-temperature protection threshold (rising): Typ 130 °C
- Overcurrent/short circuit protection response time: Typ 10 μS (Cload=1μF)
- Reverse conduction current: Typ 0 μA, Max 3 μA (VI/VO=5V, TA=25°C)
Features:
- Built-in power switching tube, typical 160mΩ on-resistance.
- Low turn-on voltage and low dropout single conductor, typical voltage drop of 32mV at 200mA current.
- Support maximum on-current of about 1A at 5V and current limit of about 1.3A.
- Support power supply voltage 2.2V~5.5V.
- Typical 20uS fast current limit protection in case of output over-current or output short-circuit.
- Diode chip shutdown to protect the load circuit at the output in case of input power polarity error.
- Low-power consumption, typical 4μA quiescent operating current.
- No reverse conduction current in diode chip off state.
Applications:
- Low Voltage Drop Diode Unidirectional Power Supply
- Dual Power Supply Selection for High Voltage
- Anti External Power Supply Polarity Reverse Connection
Package:
- SOT23-3
- SOT23-6
- DFN6
CH213KS Electrical Characteristics
| Name | Parameter Description | Parameter Description | Min. | Typ. | Max. | Unit |
|---|---|---|---|---|---|---|
| VI,VO | Supply voltage (take the higher voltage among VI or VO) | Supply voltage (take the higher voltage among VI or VO) | 2.2 | 5 | 5.5 | V |
| Iq | Quiet operating current at turn-on | Quiet operating current at turn-on | 3.6 | 10 | μA | |
| Isdo | Operating current at theVO side at shutdown | Operating current at theVO side at shutdown | 2.7 | 10 | μA | |
| Isdi | Operating current at the VI side at shutdown | Operating current at the VI side at shutdown | 0 | 1 | μA | |
| Ioff | Reverse conduction current fromVO to VI at shutdown | Reverse conduction current fromVO to VI at shutdown | 0 | 3 | μA | |
| Vsw | Ideal differential pressure threshold for diode opening (VI-VO) | Ideal differential pressure threshold for diode opening (VI-VO) | 14 | mV | ||
| Ron | Power switching tube on- resistance | Iout=500mA | 120 | 160 | 240 | mΩ |
| Iout | Ideal diode on-current range | Ideal diode on-current range | 0 | 500 | 900 | mA |
| Imax | Current limit threshold, overcurrent protection current threshold | Current limit threshold, overcurrent protection current threshold | 1.05 | 1.3 | 1.6 | A |
| Vshort | VO short-circuit protection voltage threshold | VO short-circuit protection voltage threshold | 0.8 | 0.95 | 1.1 | V |
| Ishort | VO short-circuit current to ground after short- circuit protection | VO short-circuit current to ground after short- circuit protection | 180 | 250 | 330 | mA |
| Vdrmin | Ideal diode conduction minimum voltage drop | Iout=0.1mA | 2 | 15 | 30 | mV |
| Vdr100 | Voltage drop when the ideal diode is on | Iout=100mA | 6 | 20 | 40 | mV |
| Vdr200 | Voltage drop when the ideal diode is on | Iout=200mA | 16 | 32 | 57 | mV |
| Vdr300 | Voltage drop when the ideal diode is on | Iout=300mA | 28 | 48 | 80 | mV |
| Vdr500 | Voltage drop when the ideal diode is on | Iout=500mA | 52 | 80 | 130 | mV |
| Vdr1k | Voltage drop when the ideal diode is on | Iout=1000mA | 120 | 160 | 240 | mV |
| Tsd | Over-temperature protection | Rising stage | 130 | °C |
4
| threshold (with hysteresis characteristics) | Falling stage | 100 | °C | |||
|---|---|---|---|---|---|---|
| Ton | Main guide opening time | Cload=1μF | 600 | 1200 | uS | |
| Tshort | Overcurrent or short circuit protection response time | Cload=1μF | 10 | 60 | uS | |
| Rload | Resistive load range at theVO output | Resistive load range at theVO output | 5 | Ω | ||
| Cload | Capacitive load range at theVO output | Capacitive load range at theVO output | 0.0001 | 0.1~10 | 500 | μF |
CH213KS Absolute Maximum Ratings
| Name | Parameter Description | Min. | Max. | Unit |
|---|---|---|---|---|
| TA | Ambient temperature at work | -40 | 85 | °C |
| TS | Ambient temperature during storage | -55 | 150 | °C |
| VI | Supply voltage of VI pin to GND pin | -6.5 | 6.5 | V |
| VO | Supply voltage ofVO pin toGND pin | -0.5 | 6.5 | V |
| VDIFF | Voltage difference between VI pin andVO pin (VI-VO) | -6.5 | 6.5 | V |
| VESD | HBMmannequin ESD tolerant voltage | 2 | V | |
| PD | Maximum power consumption of the whole chip | 400 | mW | |
| θ JAS | SOT23, SOT23-6L package thermal resistance | 220 | °C/W | |
| θ JAQ | DFN6_2x2 package thermal resistance | 140 | °C/W |
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
Other Diodes
- CDSOT23-SM712 – Bourns Inc., Surface Mount TVS Diode
- SS34HE – Vishay Intertechnology, Schottky Barrier Rectifier
- BSD3A311V – Brightking, ESD Protection Diode
- CH213K – WCH, Low Dropout Ideal Diode Chip
- VMNN110CMS-TR – Stanley Electric, Infrared Emitting Diode
- ESD5Z2.5T1G – onsemi, ESD Protection TVS Diode
- PMEG4010CEJ – Nexperia, Schottky Barrier Rectifier
- BAT54S – Diotec Semiconductor, Dual Schottky Barrier Diode (Series)
Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.
Ask your AI agent about the CH213KS
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the CH213KS run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.