TPD1E05U06
ESD Protection DeviceThe TPD1E05U06 is a esd protection device from Texas Instruments. View the full TPD1E05U06 datasheet below including electrical characteristics, absolute maximum ratings.
Manufacturer
Texas Instruments
Category
ESD Protection Device
Overview
Part: TPDxE05U06 — Texas Instruments
Type: ESD Protection Device
Description: Unidirectional Transient Voltage Suppressor (TVS) based Electrostatic Discharge (ESD) protection diodes with ultra-low capacitance, designed for protecting high-speed signal pins up to 6 Gbps against ESD strikes above IEC 61000-4-2 level 4.
Operating Conditions:
- Operating temperature: -40°C to +125°C
- Max data rate: Up to 6 Gbps
Absolute Maximum Ratings:
- Max EFT current: 80 A (5/50 ns)
- Max peak pulse current: 2.5 A (8/20 μs)
- Max peak pulse power: 40 W (8/20 μs)
- Max storage temperature: 155 °C
Key Specs:
- IO capacitance: 0.42 pF to 0.5 pF (typical)
- DC breakdown voltage: 6.5 V (minimum)
- Ultra low leakage current: 10 nA (maximum)
- IEC 61000-4-2 contact discharge: ±12 kV
- IEC 61000-4-2 air gap discharge: ±15 kV
- ESD HBM (DPY, DQA, RVZ): ±4000 V
- ESD CDM (DPY, DQA, RVZ): ±1500 V
Features:
- IEC 61000-4-2 level 4 ESD protection
- IEC 61000-4-4 EFT protection -80 A (5/50 ns)
- IEC 61000-4-5 surge protection -2.5 A (8/20 μs)
- IO capacitance 0.42 pF to 0.5 pF (typical)
- DC breakdown voltage 6.5 V (minimum)
- Ultra low leakage current 10 nA (maximum)
- Low ESD clamping voltage
- Industrial temperature range: -40°C to +125°C
- Easy straight-through routing packages
Applications:
- HDMI 1.4b
- HDMI 2.0
- USB 3.0
- MHL
- LVDS interfaces
- DisplayPort
- PCI-express ®
- eSata interfaces
- V-by-One ® HS
Package:
- X1SON (0.60 mm × 1.00 mm)
- SOD-523 (0.80 mm × 1.20 mm body, 1.60 mm × 0.80 mm × 0.65 mm lead-to-lead)
- USON (10-pin, 2.50 mm × 1.00 mm)
- USON (14-pin, 3.50 mm × 1.35 mm)
Features
- IEC 61000-4-2 level 4 ESD protection
- -±12-kV contact discharge
- -±15-kV air gap discharge
- IEC 61000-4-4 EFT protection -80 A (5/50 ns)
- IEC 61000-4-5 surge protection -2.5 A (8/20 μs)
- IO capacitance 0.42 pF to 0.5 pF (typical)
- DC breakdown voltage 6.5 V (minimum)
- Ultra low leakage current 10 nA (maximum)
- Low ESD clamping voltage
- Industrial temperature range: -40°C to +125°C
- Easy straight-through routing packages
- Industry standard SOD-523 package (1.60 mm × 0.80 mm × 0.65 mm)
Applications
- HDMI 1.4 b
- HDMI 2.0
- USB 3.0
- MHL
- LVDS interfaces
- DisplayPort
- PCI-express ®
- eSata interfaces
- V-by-One ® HS
Simplified Schematic
Simplified Schematic
Pin Configuration
Figure 5-1. DPY Package 2-Pin X1SON Top View
Figure 5-2. DYA Package 2-Pin SOD-523 Top View
Table 5-1. Pin Functions TPD1E05U06 DPY and DYA
| PIN | PIN | TYPE | DESCRIPTION |
|---|---|---|---|
| NAME | NO. | ||
| GND | 2 | Ground | Ground; Connect to ground |
| I/O | 1 | I/O | ESD protected channel (1) |
- (1) Place as close to the connector as possible.
- (1) Place as close to the connector as possible.
Figure 5-3. DQA Package 10-Pin USON Top View
Table 5-2. Pin Functions TPD4E05U06 DQA
| PIN | PIN | TYPE | DESCRIPTION |
|---|---|---|---|
| NAME | NO. | TYPE | DESCRIPTION |
| D1+ | 1 | I/O | ESD protected channel (1) |
| D1- | 2 | I/O | ESD protected channel (1) |
| D2+ | 4 | I/O | ESD protected channel (1) |
| D2- | 5 | I/O | ESD protected channel (1) |
| GND | 3 | Ground | Ground; Connect to ground |
| GND | 8 | Ground | Ground; Connect to ground |
| NC | 6 | - | Not connected; Used for optional straight-through routing. Can be left floating or grounded |
| NC | 7 | - | Not connected; Used for optional straight-through routing. Can be left floating or grounded |
| NC | 9 | - | Not connected; Used for optional straight-through routing. Can be left floating or grounded |
| NC | 10 | - | Not connected; Used for optional straight-through routing. Can be left floating or grounded |
Table 5-2. Pin Functions TPD4E05U06 DQA
Figure 5-4. RVZ Package 14-Pin USON Top View
Table 5-3. Pin Functions TPD6E05U06 RVZ
| PIN | PIN | TYPE | DESCRIPTION |
|---|---|---|---|
| NAME | NO. | TYPE | DESCRIPTION |
| D1+ | 14 | I/O | ESD protected channel (1) |
| D1- | 13 | I/O | ESD protected channel (1) |
| D2+ | 12 | I/O | ESD protected channel (1) |
| D2- | 11 | I/O | ESD protected channel (1) |
| D3+ | 9 | I/O | ESD protected channel (1) |
| D3- | 8 | I/O | ESD protected channel (1) |
| GND | 5 | Ground | Ground; Connect to ground |
| GND | 10 | Ground | Ground; Connect to ground |
| NC | 1 | - | Not connected; Used for optional straight-through routing. Can be left floating or grounded |
| NC | 2 | - | Not connected; Used for optional straight-through routing. Can be left floating or grounded |
| NC | 3 | - | Not connected; Used for optional straight-through routing. Can be left floating or grounded |
| NC | 4 | - | Not connected; Used for optional straight-through routing. Can be left floating or grounded |
| NC | 6 | - | Not connected; Used for optional straight-through routing. Can be left floating or grounded |
| NC | 7 | - | Not connected; Used for optional straight-through routing. Can be left floating or grounded |
- (1) Place as close to the connector as possible.
Electrical Characteristics
over operating free-air temperature range (unless otherwise noted)
| PARAMETER | PARAMETER | TEST CONDITION | MIN | TYP | MAX | UNIT |
|---|---|---|---|---|---|---|
| INPUT - OUTPUT RESISTANCE | INPUT - OUTPUT RESISTANCE | INPUT - OUTPUT RESISTANCE | INPUT - OUTPUT RESISTANCE | INPUT - OUTPUT RESISTANCE | INPUT - OUTPUT RESISTANCE | INPUT - OUTPUT RESISTANCE |
| V RWM | Reverse stand-off voltage | I IO < 10 μA | 5.5 | V | ||
| V BR | Break-down voltage | I IO = 1 mA | 6.5 | 8.5 | V | |
| V Clamp | Clamp voltage | I PP = 1 A, TLP, from I/O to GND (1) | 10 | V | ||
| V Clamp | Clamp voltage | I PP = 5 A, TLP, from I/O to GND (1) | 14 | V | ||
| V Clamp | Clamp voltage | I PP = 1 A, TLP, from GND to I/O (1) | 3 | V | ||
| V Clamp | Clamp voltage | I PP = 5 A, TLP, from GND to I/O (1) | 7 | V | ||
| I LEAK | Leakage current | V IO = 2.5 V | 0.01 | 10 | nA | |
| R DYN | DYA package | I/O to GND (2) | 0.8 | Ω | ||
| R DYN | DYA package | GND to I/O (2) | 0.8 | Ω | ||
| R DYN | DYA package | I/O to GND (2) | 0.8 | Ω | ||
| R DYN | DYA package | GND to I/O (2) | 0.7 | Ω | ||
| R DYN | DYA package | I/O to GND (2) | 0.8 | Ω | ||
| R DYN | DQA package | GND to I/O (2) | 0.8 | Ω | ||
| R DYN | DYA package | I/O to GND (2) | 0.8 | Ω | ||
| R DYN | RVZ package | GND to I/O (2) | 0.8 | Ω | ||
| CAPACITANCE | CAPACITANCE | CAPACITANCE | CAPACITANCE | CAPACITANCE | CAPACITANCE | CAPACITANCE |
| C L | Line capacitance (3) | V IO = 2.5 V; ƒ = 1 MHz , I/O to GND | TPD1E05U06 DPY package | 0.42 | pF | |
| C L | Line capacitance (3) | V IO = 2.5 V; ƒ = 1 MHz , I/O to GND | TPD1E05U06 DYA package | 0.42 | pF | |
| C L | Line capacitance (3) | V IO = 2.5 V; ƒ = 1 MHz , I/O to GND | TPD4E05U06 DQA package | 0.5 | pF | |
| C L | Line capacitance (3) | V IO = 2.5 V; ƒ = 1 MHz , I/O to GND | TPD6E05U06 RVZ package | 0.47 | pF | |
| Δ C IO- TO-GND | Variation of input capacitance | GND Pin = 0 V, f = 1 MHz, VBIAS = 2.5 V, Channel x pin to GND - channel y pin to GND | GND Pin = 0 V, f = 1 MHz, VBIAS = 2.5 V, Channel x pin to GND - channel y pin to GND | 0.05 0.07 | pF |
Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted) (1)
| MIN | MAX | UNIT | ||
|---|---|---|---|---|
| Electrical Fast Transient (2) (3) | IEC 61000-4-4 (5/50ns) | 80 | A | |
| Peak Pulse (2) (3) | IEC 61000-4-5 Current (8/20us) | 2.5 | A | |
| Peak Pulse (2) (3) | IEC 61000-4-5 Power (8/20us) | 40 | W | |
| T A | Ambient Operating Temperature | -40 | 125 | °C |
| T stg | Storage Temperature | -65 | 155 | °C |
Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)
| MIN | NOM | MAX | UNIT | ||
|---|---|---|---|---|---|
| V IO | Input pin voltage | 0 | 5.5 | V | |
| T A | Operating free-air temperature | -40 | 125 | °C |
Thermal Information
| TPD1E05U06 | TPD1E05U06 | TPD4E05U06 | TPD6E05U06 | ||
|---|---|---|---|---|---|
| THERMAL METRIC (1) | THERMAL METRIC (1) | DPY (X1SON) | DYA (SOD523) | DQA (USON) | RVZ (USON) |
| 2 PINS | 2 PINS | 10 PINS | 14 PINS | ||
| R θJA | Junction-to-ambient thermal resistance | 697.3 | 772.1 | 327 | 197.9 |
| R θJC(top) | Junction-to-case (top) thermal resistance | 471 | 444.6 | 189.5 | 119.1 |
| R θJB | Junction-to-board thermal resistance | 575.9 | 540.4 | 257.7 | 92.6 |
| Ψ JT | Junction-to-top characterization parameter | 175.7 | 159.9 | 60.9 | 22 |
| Ψ JB | Junction-to-board characterization parameter | 575.1 | 533.9 | 257 | 91.6 |
Typical Application
The TPDxE05U06 is a diode type TVS which is typically used to provide a path to ground for dissipating ESD events on hi-speed signal lines between a human interface connector and a system. As the current from ESD passes through the TVS, only a small voltage drop is present across the diode. This is the voltage presented to the protected IC. The low RDYN of the triggered TVS holds this voltage, VCLAMP, to a safe level for the protected IC.
Related Variants
The following components are covered by the same datasheet.
| Part Number | Manufacturer | Package |
|---|---|---|
| TPD1E05U06-Q1 | Texas Instruments | — |
| TPD1E05U06DPY | Texas Instruments | — |
| TPD1E05U06DPYR | Texas Instruments | X2-SON-2(0.6x1) |
| TPD1E05U06DPYT | Texas Instruments | — |
| TPD1E05U06DYAR | Texas Instruments | — |
| TPD4E05U06 | Texas Instruments | — |
| TPD6E05U06 | Texas Instruments | — |
| TPDXE05U06 | Texas Instruments | — |
Get structured datasheet data via API
Get started free