SM4007
General Purpose Plastic RectifierThe SM4007 is a general purpose plastic rectifier from Micro Commercial Components. View the full SM4007 datasheet below including key specifications, electrical characteristics, absolute maximum ratings.
Official SM4007 datasheet (PDF) — the source this page was extracted from.
Manufacturer
Micro Commercial ComponentsCategory
DiodesSM4007 Key Specifications
| Parameter | Value |
|---|---|
| Maximum repetitive peak reverse voltage (VRRM) | 50 V to 1000 V |
| Maximum average forward rectified current (I(AV)) | 1.0 A (at TA=75°C) |
| Peak forward surge current (IFSM) | 30.0 A (8.3ms single half sine-wave, TA=75°C) |
| Maximum instantaneous forward voltage (VF) | 1.1 V (at 1.0A) |
| Maximum DC reverse current (IR) | 5.0 mA (at TA=25°C, at rated DC blocking voltage) |
| Typical reverse recovery time (trr) | 30.0 ms |
| Typical junction capacitance (CJ) | 15.0 pF (at 1.0 MHz and 4.0 V reverse voltage) |
| Typical thermal resistance (RθJA) | 50.0 °C/W |
SM4007 Overview
Part: SM4001PL through SM4007PL
Type: General Purpose Plastic Rectifier
Description: 1.0 A general purpose plastic rectifier series with repetitive peak reverse voltages from 50 V to 1000 V and 30 A peak forward surge current.
Operating Conditions:
- Supply voltage: not applicable
- Operating temperature: -50 to +175 °C
- Max average forward rectified current: 1.0 A (at TA=75°C)
Absolute Maximum Ratings:
- Max supply voltage: 1000 V (repetitive peak reverse voltage for SM4007PL)
- Max continuous current: 1.0 A (average forward rectified current)
- Max junction/storage temperature: +175 °C
Key Specs:
- Maximum repetitive peak reverse voltage (VRRM): 50 V to 1000 V
- Maximum average forward rectified current (I(AV)): 1.0 A (at TA=75°C)
- Peak forward surge current (IFSM): 30.0 A (8.3ms single half sine-wave, TA=75°C)
- Maximum instantaneous forward voltage (VF): 1.1 V (at 1.0A)
- Maximum DC reverse current (IR): 5.0 mA (at TA=25°C, at rated DC blocking voltage)
- Typical reverse recovery time (trr): 30.0 ms
- Typical junction capacitance (CJ): 15.0 pF (at 1.0 MHz and 4.0 V reverse voltage)
- Typical thermal resistance (RθJA): 50.0 °C/W
Features:
- Plastic package with Underwriters Laboratory Flammability Classification 94V-0
- Construction utilizes void-free molded plastic technique
- Low reverse leakage
- High forward surge current capability
- High temperature soldering guaranteed: 250°C/10 seconds, 0.375" (9.5mm) lead length
Package:
- JEDEC SOD-123
- SOD-123FL
SM4007 Features
- The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 ·
- Construction utilizes void-free molded plastic technique ·
- Low reverse leakage ·
- High forward surge current capability ·
- High temperature soldering guaranteed: 250°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension ·
SM4007 Electrical Characteristics
Ratings at 25°C ambient temperature unless otherwise specified.
| SYMBOLS | SM 4001PL | SM 4002PL | SM 4003PL | SM 4004PL | SM 4005PL | SM 4006PL | SM 4007PL | UNITS | |
|---|---|---|---|---|---|---|---|---|---|
| *Maximum repetitive peak reverse voltage | VRRM | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | Volts |
| *Maximum RMS voltage | VRMS | 35 | 70 | 140 | 280 | 420 | 560 | 700 | Volts |
| *Maximum DC blocking voltage | VDC | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | Volts |
| *Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=75°C | I (AV) | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | Amp |
| *Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) TA =75°C | I FSM | 30.0 | 30.0 | 30.0 | 30.0 | 30.0 | 30.0 | 30.0 | Amps |
| *Maximum instantaneous forward voltage at 1.0A | VF | 1.1 | 1.1 | 1.1 | 1.1 | 1.1 | 1.1 | 1.1 | Volts |
| *Maximum full load reverse current full cycle average 0.375" (9.5mm) lead length at TL =75°C | I R(AV) | 30.0 | 30.0 | 30.0 | 30.0 | 30.0 | 30.0 | 30.0 | m A |
| *Maximum DC reverse current TA = 25°C at rated DC blocking voltage TA =100°C | I R | 5.0 50.0 | 5.0 50.0 | 5.0 50.0 | 5.0 50.0 | 5.0 50.0 | 5.0 50.0 | 5.0 50.0 | m A |
| Typical reverse recovery time (NOTE 1) | t rr | 30.0 | 30.0 | 30.0 | 30.0 | 30.0 | 30.0 | 30.0 | m s |
| Typical junction capacitance (NOTE 2) | CJ | 15.0 | 15.0 | 15.0 | 15.0 | 15.0 | 15.0 | 15.0 | pF |
| Typical thermal resistance (NOTE 3) | R Q JA R Q JL | 50.0 25.0 | 50.0 25.0 | 50.0 25.0 | 50.0 25.0 | 50.0 25.0 | 50.0 25.0 | 50.0 25.0 | °C/W |
| Maximum DC blocking voltage temperature | TA | +150 | +150 | +150 | +150 | +150 | +150 | +150 | °C |
| *Operating junction and storage temperature range | TJ , TSTG | -50 to +175 | -50 to +175 | -50 to +175 | -50 to +175 | -50 to +175 | -50 to +175 | -50 to +175 | °C |
SM4007 Absolute Maximum Ratings
Ratings at 25°C ambient temperature unless otherwise specified.
| SYMBOLS | SM 4001PL | SM 4002PL | SM 4003PL | SM 4004PL | SM 4005PL | SM 4006PL | SM 4007PL | UNITS | |
|---|---|---|---|---|---|---|---|---|---|
| *Maximum repetitive peak reverse voltage | VRRM | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | Volts |
| *Maximum RMS voltage | VRMS | 35 | 70 | 140 | 280 | 420 | 560 | 700 | Volts |
| *Maximum DC blocking voltage | VDC | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | Volts |
| *Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=75°C | I (AV) | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | 1.0 | Amp |
| *Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) TA =75°C | I FSM | 30.0 | 30.0 | 30.0 | 30.0 | 30.0 | 30.0 | 30.0 | Amps |
| *Maximum instantaneous forward voltage at 1.0A | VF | 1.1 | 1.1 | 1.1 | 1.1 | 1.1 | 1.1 | 1.1 | Volts |
| *Maximum full load reverse current full cycle average 0.375" (9.5mm) lead length at TL =75°C | I R(AV) | 30.0 | 30.0 | 30.0 | 30.0 | 30.0 | 30.0 | 30.0 | m A |
| *Maximum DC reverse current TA = 25°C at rated DC blocking voltage TA =100°C | I R | 5.0 50.0 | 5.0 50.0 | 5.0 50.0 | 5.0 50.0 | 5.0 50.0 | 5.0 50.0 | 5.0 50.0 | m A |
| Typical reverse recovery time (NOTE 1) | t rr | 30.0 | 30.0 | 30.0 | 30.0 | 30.0 | 30.0 | 30.0 | m s |
| Typical junction capacitance (NOTE 2) | CJ | 15.0 | 15.0 | 15.0 | 15.0 | 15.0 | 15.0 | 15.0 | pF |
| Typical thermal resistance (NOTE 3) | R Q JA R Q JL | 50.0 25.0 | 50.0 25.0 | 50.0 25.0 | 50.0 25.0 | 50.0 25.0 | 50.0 25.0 | 50.0 25.0 | °C/W |
| Maximum DC blocking voltage temperature | TA | +150 | +150 | +150 | +150 | +150 | +150 | +150 | °C |
| *Operating junction and storage temperature range | TJ , TSTG | -50 to +175 | -50 to +175 | -50 to +175 | -50 to +175 | -50 to +175 | -50 to +175 | -50 to +175 | °C |
SM4007 Package Information
JEDEC SOD-123 molded plastic body
Case:
Terminals:
Plated axial leads, solderable per MIL-STD-750,
Method 2026
Polarity:
Color band denotes cathode end
Mounting Position:
Any
Weight:
0.012 ounce, 0.3 gram
More part numbers on this datasheet
Their pages show this same datasheet. Some are linked through their part family rather than checked part by part, so confirm the exact part in the ordering information.
Other Diodes
- CDSOT23-SM712 – Bourns Inc., Surface Mount TVS Diode
- SS34HE – Vishay Intertechnology, Schottky Barrier Rectifier
- BSD3A311V – Brightking, ESD Protection Diode
- CH213K – WCH, Low Dropout Ideal Diode Chip
- VMNN110CMS-TR – Stanley Electric, Infrared Emitting Diode
- ESD5Z2.5T1G – onsemi, ESD Protection TVS Diode
- PMEG4010CEJ – Nexperia, Schottky Barrier Rectifier
- USBLC6-2SC6 – STMicroelectronics, ESD Protection Device
All Diodes datasheetsAll Micro Commercial Components datasheets (22)
Ask your AI agent about the SM4007
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the SM4007 run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.