SM4001PL
SM4001PL~SM4007PL
Overview
Part: SM4001PL~SM4007PL
Type: General Purpose Plastic Rectifier
Key Specs:
- Maximum repetitive peak reverse voltage: 50 V to 1000 V
- Maximum average forward rectified current: Up to 1.0 Amp (at TA=75°C)
- Peak forward surge current: Up to 30.0 Amps (8.3ms single half sine-wave at TA=75°C)
- Maximum instantaneous forward voltage: Up to 1.1 Volts (at 1.0A)
- Typical reverse recovery time: 30.0 μs
- Typical junction capacitance: 15.0 pF
- Weight: 0.3 gram
Features:
- Plastic package carries Underwriters Laboratory Flammability Classification 94V-0
- Construction utilizes void-free molded plastic technique
- Low reverse leakage
- High forward surge current capability
- High temperature soldering guaranteed: 250°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension
Applications:
- null
Package:
- JEDEC SOD-123 molded plastic body: dimensions in millimeters
- SOD-123FL: dimensions in millimeters
Features
The plastic package carries Underwriters Laboratory Flammability Classification 94V-0
- Construction utilizes void-free molded plastic technique
- · Low reverse leakage
- High forward surge current capability
- High temperature soldering guaranteed: 250°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension
Electrical Characteristics
Ratings at 25°C ambient temperature unless otherwise specified.
| SYMBOLS | SM 4001PL | SM 4002PL | SM 4003PL | SM 4004PL | SM 4005PL | SM 4006PL | SM 4007PL | UNITS | |
|---|---|---|---|---|---|---|---|---|---|
| *Maximum repetitive peak reverse voltage | VRRM | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | Volts |
| *Maximum RMS voltage | V RMS | 35 | 70 | 140 | 280 | 420 | 560 | 700 | Volts |
| *Maximum DC blocking voltage | V DC | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | Volts |
| *Maximum average forward rectified current 0.375" (9.5mm) lead length at T A =75°C | I (AV) | 1.0 | Amp | ||||||
| *Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) TA=75°C | IFSM | 30.0 | Amps | ||||||
| *Maximum instantaneous forward voltage at 1.0A | VF | 1.1 | Volts | ||||||
| *Maximum full load reverse current full cycle average 0.375" (9.5mm) lead length at TL=75°C | IR(AV) | 30.0 | μA | ||||||
| *Maximum DC reverse current TA= 25°C at rated DC blocking voltage TA=100°C | lR | 5.0 50.0 | μΑ | ||||||
| Typical reverse recovery time (NOTE 1) | t rr | 30.0 | μs | ||||||
| Typical junction capacitance (NOTE 2) | CJ | 15.0 | pF | ||||||
| Typical thermal resistance (NOTE 3) | R⊖JA R⊖JL | 50.0 25.0 | °C/W | ||||||
| Maximum DC blocking voltage temperature | TA | +150 | °C | ||||||
| *Operating junction and storage temperature range | T J , T STG | -5 | 0 to +17 | 5 | °C |
NOTES:
(1) Measured on Tektronix Type "S" recovery plug-in. Tektronix 545 Scope or equivalent, IFM=20mA, IRM=1mA
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length, P.C.B. mounted
AVERAGE FORWARD CURRENT, (A)
INSTANTANEOUS FORWARD CURRENT, (A)
Absolute Maximum Ratings
Ratings at 25°C ambient temperature unless otherwise specified.
| SYMBOLS | SM 4001PL | SM 4002PL | SM 4003PL | SM 4004PL | SM 4005PL | SM 4006PL | SM 4007PL | UNITS | |
|---|---|---|---|---|---|---|---|---|---|
| *Maximum repetitive peak reverse voltage | VRRM | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | Volts |
| *Maximum RMS voltage | V RMS | 35 | 70 | 140 | 280 | 420 | 560 | 700 | Volts |
| *Maximum DC blocking voltage | V DC | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | Volts |
| *Maximum average forward rectified current 0.375" (9.5mm) lead length at T A =75°C | I (AV) | 1.0 | Amp | ||||||
| *Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) TA=75°C | IFSM | 30.0 | Amps | ||||||
| *Maximum instantaneous forward voltage at 1.0A | VF | 1.1 | Volts | ||||||
| *Maximum full load reverse current full cycle average 0.375" (9.5mm) lead length at TL=75°C | IR(AV) | 30.0 | μA | ||||||
| *Maximum DC reverse current TA= 25°C at rated DC blocking voltage TA=100°C | lR | 5.0 50.0 | μΑ | ||||||
| Typical reverse recovery time (NOTE 1) | t rr | 30.0 | μs | ||||||
| Typical junction capacitance (NOTE 2) | CJ | 15.0 | pF | ||||||
| Typical thermal resistance (NOTE 3) | R⊖JA R⊖JL | 50.0 25.0 | °C/W | ||||||
| Maximum DC blocking voltage temperature | TA | +150 | °C | ||||||
| *Operating junction and storage temperature range | T J , T STG | -5 | 0 to +17 | 5 | °C |
NOTES:
(1) Measured on Tektronix Type "S" recovery plug-in. Tektronix 545 Scope or equivalent, IFM=20mA, IRM=1mA
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
(3) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length, P.C.B. mounted
AVERAGE FORWARD CURRENT, (A)
INSTANTANEOUS FORWARD CURRENT, (A)
Related Variants
The following components are covered by the same datasheet.
Get structured datasheet data via API
Get started free