SM4007PL

Part: SM4001PL through SM4007PL

Type: General Purpose Plastic Rectifier

Description: 1.0 A general purpose plastic rectifier series with repetitive peak reverse voltages from 50 V to 1000 V and 30 A peak forward surge current.

Operating Conditions:

• Supply voltage: not applicable
• Operating temperature: -50 to +175 °C
• Max average forward rectified current: 1.0 A (at TA=75°C)

Absolute Maximum Ratings:

• Max supply voltage: 1000 V (repetitive peak reverse voltage for SM4007PL)
• Max continuous current: 1.0 A (average forward rectified current)
• Max junction/storage temperature: +175 °C

Key Specs:

• Maximum repetitive peak reverse voltage (VRRM): 50 V to 1000 V
• Maximum average forward rectified current (I(AV)): 1.0 A (at TA=75°C)
• Peak forward surge current (IFSM): 30.0 A (8.3ms single half sine-wave, TA=75°C)
• Maximum instantaneous forward voltage (VF): 1.1 V (at 1.0A)
• Maximum DC reverse current (IR): 5.0 mA (at TA=25°C, at rated DC blocking voltage)
• Typical reverse recovery time (trr): 30.0 ms
• Typical junction capacitance (CJ): 15.0 pF (at 1.0 MHz and 4.0 V reverse voltage)
• Typical thermal resistance (RθJA): 50.0 °C/W

Features:

• Plastic package with Underwriters Laboratory Flammability Classification 94V-0
• Construction utilizes void-free molded plastic technique
• Low reverse leakage
• High forward surge current capability
• High temperature soldering guaranteed: 250°C/10 seconds, 0.375" (9.5mm) lead length

Package:

• JEDEC SOD-123
• SOD-123FL

• The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 ·
• Construction utilizes void-free molded plastic technique ·
• Low reverse leakage ·
• High forward surge current capability ·
• High temperature soldering guaranteed: 250°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension ·

SM4007PL Pinout

Package: SOD-123FL (2-pin axial lead rectifier diode)

Notes

• SM4007PL is a general-purpose plastic rectifier diode in SOD-123FL package with a maximum repetitive peak reverse voltage (VRRM) of 1000V.
• Pin 1 (Anode) connects to the unmarked end of the component body.
• Pin 2 (Cathode) is identified by a color band on the component body.
• Maximum average forward rectified current: 1.0 A at TA = 75°C.
• Maximum instantaneous forward voltage: 1.1 V at 1.0 A.
• Operating temperature range: −50°C to +175°C.

Ratings at 25°C ambient temperature unless otherwise specified.

Ratings at 25°C ambient temperature unless otherwise specified.

JEDEC SOD-123 molded plastic body

Case:

Terminals:

Plated axial leads, solderable per MIL-STD-750,

Method 2026

Polarity:

Color band denotes cathode end

Mounting Position:

Any

Weight:

0.012 ounce, 0.3 gram