SMMBT2907ALT3G
PNP Silicon General Purpose TransistorThe SMMBT2907ALT3G is a pnp silicon general purpose transistor from onsemi. View the full SMMBT2907ALT3G datasheet below including key specifications, electrical characteristics, absolute maximum ratings.
SMMBT2907ALT3G shares its datasheet with MMBT2907ALT1G, whose page lists every part number it covers.
Official SMMBT2907ALT3G datasheet (PDF) — the source this page was extracted from.
SMMBT2907ALT3G Key Specifications
| Parameter | Value |
|---|---|
| Packaging | MouseReel |
| Standard Pack Qty | 10000 |
| Collector - Emitter Voltage VCEO | 60V |
| Collector Current (Max) | 600 mA |
| Current - Collector Cutoff | 10nA |
| Current - Collector Cutoff (Max) | 10nA (ICBO) |
| Current - Collector(Ic) | 600mA |
| DC Current Gain | 75 |
| DC Current Gain (hFE) | 100 @ 150mA, 10V |
| Emitter-Base Voltage VEBO | 5V |
| Transition Frequency | 200MHz |
| Mounting Type | Surface Mount |
| Number | 1 PNP |
| Operating Temperature | -55℃~+150℃ °C |
| Operating Temperature | -55°C ~ 150°C (TJ) |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Pd - Power Dissipation | 350mW |
| Power (Max) | 300 mW |
| Supplier Device Package | SOT-23-3 (TO-236) |
| Transistor Type | PNP |
| Transition frequency(fT) | 200MHz |
| type | PNP |
| Vce Saturation | 1.6V @ 50mA, 500mA |
| Vce Saturation(VCE(sat)) | 1.6V |
| Collector-Emitter Breakdown Voltage | 60 V |
SMMBT2907ALT3G Overview
Part: MMBT2907ALT1G — onsemi
Type: PNP Silicon General Purpose Transistor
Description: PNP general-purpose bipolar transistor with -60 V VCEO, -600 mA continuous collector current, and 200 MHz minimum transition frequency in a SOT-23 package.
Operating Conditions:
- Supply voltage: not applicable
- Operating temperature: -55 to +150 °C (junction and storage temperature)
- Collector current: up to -600 mAdc continuous
Absolute Maximum Ratings:
- Collector-emitter voltage (VCEO): -60 Vdc
- Collector-base voltage (VCBO): -60 Vdc
- Emitter-base voltage (VEBO): -5.0 Vdc
- Max continuous collector current: -600 mAdc (peak: -1200 mAdc)
- Max junction/storage temperature: -55 to +150 °C
Key Specs:
- DC current gain (hFE): 100 min at IC = -150 mA, VCE = -10 V (300 max); 50 min at IC = -500 mA
- VCE(sat): -0.4 V max at IC = -150 mA, IB = -15 mA; -1.6 V max at IC = -500 mA, IB = -50 mA
- VBE(sat): -1.3 V max at IC = -150 mA, IB = -15 mA; -2.6 V max at IC = -500 mA, IB = -50 mA
- Transition frequency (fT): 200 MHz min at IC = -50 mA, VCE = -20 V, f = 100 MHz
- Output capacitance (Cobo): 8.0 pF max at VCB = -10 V, f = 1 MHz
- Collector cutoff current (ICBO): -0.010 μAdc max at VCB = -50 V; -10 μAdc at TA = 125 °C
- Turn-on time: 45 ns max; turn-off time: 100 ns max (VCC = -30 V, IC = -150 mA, IB1 = -15 mA)
- Power dissipation: 225 mW on FR-5 board at TA = 25 °C; RθJA 556 °C/W
Features:
- Pb-Free, Halogen Free/BFR Free and RoHS compliant
- S-prefix variants for automotive and other applications requiring unique site and control change requirements; AEC-Q101 qualified and PPAP capable
Package:
- SOT-23 (TO-236AB), Case 318, 3 pins (Style 6: 1 Base, 2 Emitter, 3 Collector)
SMMBT2907ALT3G Features
- These Devices are Pb-Free, Halogen Free/BFR Free and are RoHS Compliant
- S Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable
SMMBT2907ALT3G Electrical Characteristics
| Characteristic | Characteristic | Symbol | Min | Max | Unit |
|---|---|---|---|---|---|
| OFF CHARACTERISTICS | |||||
| Collector-Emitter Breakdown Voltage (Note 5) (I C = -1.0 mAdc, I B = 0) (I C = -10 mAdc, I B = 0) | Collector-Emitter Breakdown Voltage (Note 5) (I C = -1.0 mAdc, I B = 0) (I C = -10 mAdc, I B = 0) | V (BR)CEO | -60 -60 | - - | Vdc |
| Collector-Base Breakdown Voltage (I C = -10 m Adc, I E = 0) | Collector-Base Breakdown Voltage (I C = -10 m Adc, I E = 0) | V (BR)CBO | -60 | - | Vdc |
| Emitter-Base Breakdown Voltage (I E = -10 m Adc, I C = 0) | Emitter-Base Breakdown Voltage (I E = -10 m Adc, I C = 0) | V (BR)EBO | -5.0 | - | Vdc |
| Collector Cutoff Current (V CE = -30 Vdc, V EB(off) = -0.5 Vdc) | Collector Cutoff Current (V CE = -30 Vdc, V EB(off) = -0.5 Vdc) | I CEX | - | -50 | nAdc |
| Collector Cutoff Current (V CB = -50 Vdc, I E = 0) (V CB = -50 Vdc, I E = 0, T A = 125 ° C) | Collector Cutoff Current (V CB = -50 Vdc, I E = 0) (V CB = -50 Vdc, I E = 0, T A = 125 ° C) | I CBO | - - | -0.010 -10 | m Adc |
| Base Cutoff Current (V CE = -30 Vdc, V EB(off) = -0.5 Vdc) | Base Cutoff Current (V CE = -30 Vdc, V EB(off) = -0.5 Vdc) | I BL | - | -50 | nAdc |
| ON CHARACTERISTICS | |||||
| DC Current Gain (I C = -0.1 mAdc, V CE = -10 Vdc) (I C = -1.0 mAdc, V CE = -10 Vdc) (I C = -10 mAdc, V CE = -10 Vdc) (I C = -150 mAdc, V CE = -10 Vdc) (I C = -500 mAdc, V CE = -10 Vdc) (Note 5) | DC Current Gain (I C = -0.1 mAdc, V CE = -10 Vdc) (I C = -1.0 mAdc, V CE = -10 Vdc) (I C = -10 mAdc, V CE = -10 Vdc) (I C = -150 mAdc, V CE = -10 Vdc) (I C = -500 mAdc, V CE = -10 Vdc) (Note 5) | h FE | 75 100 100 100 50 | - - - 300 - | - |
| Collector-Emitter Saturation Voltage (Note 5) (I C = -150 mAdc, I B = -15 mAdc) (Note 5) (I C = -500 mAdc, I B = -50 mAdc) | Collector-Emitter Saturation Voltage (Note 5) (I C = -150 mAdc, I B = -15 mAdc) (Note 5) (I C = -500 mAdc, I B = -50 mAdc) | V CE(sat) | - - | -0.4 -1.6 | Vdc |
| Base-Emitter Saturation Voltage (Note 5) (I C = -150 mAdc, I B = -15 mAdc) (I C = -500 mAdc, I B = -50 mAdc) | Base-Emitter Saturation Voltage (Note 5) (I C = -150 mAdc, I B = -15 mAdc) (I C = -500 mAdc, I B = -50 mAdc) | V BE(sat) | - - | -1.3 -2.6 | Vdc |
| SMALL-SIGNAL CHARACTERISTICS | |||||
| Current-Gain - Bandwidth Product (Notes 5, 6), (I C = -50 mAdc, V CE = -20 Vdc, f = 100 MHz) | Current-Gain - Bandwidth Product (Notes 5, 6), (I C = -50 mAdc, V CE = -20 Vdc, f = 100 MHz) | f T | 200 | - | MHz |
| Output Capacitance (V CB = -10 Vdc, I E = 0, f = 1.0 MHz) | Output Capacitance (V CB = -10 Vdc, I E = 0, f = 1.0 MHz) | C obo | - | 8.0 | pF |
| Input Capacitance (V EB = -2.0 Vdc, I C = 0, f = 1.0 MHz) | Input Capacitance (V EB = -2.0 Vdc, I C = 0, f = 1.0 MHz) | C ibo | - | 30 | |
| SWITCHING CHARACTERISTICS | SWITCHING CHARACTERISTICS | ||||
| Turn-On Time | (V CC = -30 Vdc, I C = -150 mAdc, I B1 = -15 mAdc) | t on | - | 45 | ns |
| Delay Time | (V CC = -30 Vdc, I C = -150 mAdc, I B1 = -15 mAdc) | t d | - | 10 | ns |
| Rise Time | (V CC = -30 Vdc, I C = -150 mAdc, I B1 = -15 mAdc) | t r | - | 40 | ns |
| Turn-Off Time | (V CC = -30 Vdc, I C = -150 mAdc, I B1 = -15 mAdc) | t off | - | 100 | ns |
| Storage Time | (V CC = -30 Vdc, I C = -150 mAdc, I B1 = -15 mAdc) | t s | - | 80 | ns |
| Fall | Time | t f | - | 30 | ns |
- Pulse Test: Pulse Width v 300 m s, Duty Cycle v 2.0%.
- f T is defined as the frequency at which |h fe | extrapolates to unity.
Figure 1. Delay and Rise Time Test Circuit
Figure 2. Storage and Fall Time Test Circuit
SMMBT2907ALT3G Absolute Maximum Ratings
| Rating | Symbol | Value | Unit |
|---|---|---|---|
| Collector-Emitter Voltage | V CEO | -60 | Vdc |
| Collector-Base Voltage | V CBO | -60 | Vdc |
| Emitter-Base Voltage | V EBO | -5.0 | Vdc |
| Collector Current - Continuous | I C | -600 | mAdc |
| Collector Current - Peak (Note 3) | I CM | -1200 | mAdc |
SMMBT2907ALT3G Thermal Information
| Characteristic | Symbol | Max | Unit |
|---|---|---|---|
| Total Device Dissipation - FR-5 Board (Note 1) @T A = 25 ° C Derate above 25 ° C | P D | 225 1.8 | mW mW/ ° C |
| Thermal Resistance, Junction-to-Ambient | R q JA | 556 | ° C/W |
| Total Device Dissipation - Alumina Substrate, (Note 2) @T A = 25 ° C Derate above 25 ° C | P D | 300 2.4 | mW mW/ ° C |
| Thermal Resistance, Junction-to-Ambient | R q JA | 417 | ° C/W |
| Total Device Dissipation - Heat Spreader or equivalent, (Note 4) @T A = 25 ° C | P D | 350 | mW |
| Thermal Resistance, Junction-to-Ambient | R q JA | 357 | ° C/W |
| Junction and Storage Temperature | T J , T stg | -55 to +150 | ° C |
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected.
- FR-5 = 1.0 -0.75 -0.062 in.
- Alumina = 0.4 -0.3 -0.024 in. 99.5% alumina.
- Reference SOA curve.
- Heat Spreader or equivalent = 450 mm 2 , 2 oz.
SOT-23 (TO-236AB) CASE 318 STYLE 6
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| MMBT2907A | onsemi | SOT-23 |
| MMBT2907ALT1G | onsemi | TO-236-3, SC-59, SOT-23-3 |
| MMBT2907ALT3G | onsemi | SOT-23 |
| SMMBT2907ALT1G | onsemi | TO-236-3, SC-59, SOT-23-3 |
Other BJTs
- DTC114ECA – GOODWORK, NPN Digital Transistor with Bias Resistors
- BC847 – onsemi, NPN General-Purpose Transistor
- 2N2219A – onsemi, NPN High Speed Switching Transistor
- 2N2222 – onsemi, NPN Silicon Amplifier Transistor
- 2N2222A – onsemi, NPN High Speed Switching Transistor
- 2N3906 – onsemi, PNP Silicon General Purpose Transistor
- 2N4921G – onsemi, NPN Medium-Power Silicon Transistor
- 2N4922G – onsemi, Medium-Power NPN Silicon Transistor
Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.
Ask your AI agent about the SMMBT2907ALT3G
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the SMMBT2907ALT3G run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.