Monolithic Power Systems Datasheets
40 Monolithic Power Systems datasheets read into specs, pinouts and ratings, including Switching Regulators (Buck), Sensors and Battery Chargers.
Monolithic Power Systems parts by category
- Switching Regulators (Buck) (28)
- Sensors (5)
- Battery Chargers (3)
Monolithic Power Systems datasheets
40 parts · page 1 of 2. Most used first, then by part number.
MP1584EN
Monolithic Power Systems
MP2344GJ-Z
Monolithic Power Systems
DC-DC Switching Synchronous Buck Regulator, 7.5V-26V in, 3.3V to 24.18V out, 2A, 600kHz, TSOT-23-6
MP2639BGR-Z
Monolithic Power Systems
POWER SUPPLY SUPPORT CIRCUIT Active ROHS3Compliant battery charger
MA102
Monolithic Power Systems
Magnetic angle position sensor for brushless DC motor commutation, generating UVW output signals.
MA302
Monolithic Power Systems
12-bit magnetic angle position sensor for BLDC motor commutation and position control, providing absolute SPI angle, ABZ incremental and UVW outputs using SpinAxis Hall technique
MA310
Monolithic Power Systems
12-bit digital magnetic angle position sensor optimized for side-shaft servo/BLDC motor applications, working with magnetic fields as low as 15mT, with SPI, ABZ and UVW interfaces.
MA330
Monolithic Power Systems
MagAlpha MA330 is a magnetic angle position sensor with 9 to 14-bit adjustable resolution and programmable filter bandwidth, aimed at BLDC servo motor commutation and encoder applications.
MA730
Monolithic Power Systems
14-bit high-resolution magnetic angular position sensor with SPI, SSI, ABZ, and PWM outputs, optimized for encoder applications.
MA800
Monolithic Power Systems
Digital magnetic angle position sensor with 8-bit absolute angle output over SPI/SSI, designed to replace potentiometers and rotary switches with contactless sensing and push-button detection
MA820
Monolithic Power Systems
Contactless 8-bit magnetic angle position sensor with programmable ABZ incremental encoder output (1-64 PPR) for rotary knob applications, using SpinAxis Hall phase-detection technique.
MA850
Monolithic Power Systems
Contactless magnetic angle position sensor with 8-bit PWM output (~50kHz) using SpinAxis Hall phase-detection technique, designed to replace potentiometers/rotary knobs
MP1482
Monolithic Power Systems
2A, 18V monolithic synchronous rectified step-down converter with integrated 130mΩ MOSFETs, current-mode control, and programmable soft-start
MP1482DS
Monolithic Power Systems
2A, 18V Synchronous Rectified Step-Down Converter with integrated MOSFETs and current mode control.
MP1482DS-LF-Z
Monolithic Power Systems
Switching Voltage Regulators 2A, 18V Sync Step-Down DCDC
MP1482DS-Z
Monolithic Power Systems
Monolithic 2A, 18V synchronous rectified step-down converter with integrated 130mΩ MOSFETs, current mode control, and programmable soft-start
MP1584
Monolithic Power Systems
MP1584 Series 28 V 3 A 1.5 MHz SMT Step-Down Converter - SOIC-8E
MP1584EN-LF-Z
Monolithic Power Systems
MP1584 Series 28 V 3 A 1.5 MHz SMT Step-Down Converter - SOIC-8E
MP1584EN-Z
Monolithic Power Systems
MP2307
Monolithic Power Systems
The MP2307 is a monolithic synchronous buck regulator that provides 3A of continuous load current over a wide operating input voltage of 4.75V to 23V.
MP2307DN
Monolithic Power Systems
Monolithic synchronous buck regulator with integrated 100mΩ MOSFETs, providing 3A continuous load current over a 4.75V to 23V input range.
MP2307DN-LF-Z
Monolithic Power Systems
Switching Voltage Regulators 3A/23VSynchRectified Step-down Converter
MP2307DN-Z
Monolithic Power Systems
3A, 23V input, 340kHz monolithic synchronous rectified step-down converter with integrated 100mΩ MOSFETs and current mode control (not recommended for new designs; refer to MP2393)
MP2315
Monolithic Power Systems
3A, 24V, 500kHz high-efficiency synchronous step-down converter with integrated 110mΩ/55mΩ power MOSFETs, AAM power-save mode, OCP, OVP and thermal shutdown. The datasheet describes the MP2315S, the next generation of the MP2315.
MP2315S
Monolithic Power Systems
3A, 24V, 500kHz high-efficiency synchronous step-down (buck) converter with integrated 110mΩ/55mΩ power MOSFETs, AAM power-save mode, and OCP/OVP/thermal protection
MP2315SGJ
Monolithic Power Systems
3A, 24V, 500kHz high-efficiency synchronous step-down (buck) converter with integrated 110mΩ/55mΩ power MOSFETs, AAM power-save mode, and OCP/OVP/thermal protection
MP2315SGJ-Z
Monolithic Power Systems
Switching Voltage Regulators 3A 24V Hi Effc.Sync Step Down Converter
MP2344
Monolithic Power Systems
26V, 2A, 600kHz high-efficiency synchronous step-down (buck) converter with integrated 95mΩ/45mΩ power MOSFETs, power-save mode, low-EMI switching edge, OCP with hiccup and thermal shutdown.
MP2344GJ
Monolithic Power Systems
26V, 2A, 600kHz high-efficiency synchronous step-down converter with integrated 95mΩ/45mΩ power MOSFETs, low-EMI optimization, and OCP/thermal protection in TSOT23-6
MP2356DJ-LF-Z
Monolithic Power Systems
MP2639B
Monolithic Power Systems
Highly integrated switch-mode battery charger for single-cell Li-ion/Li-polymer batteries with wide 4.5V-16V input range, up to 5A charge current, and integrated programmable boost (OTG) discharge mode up to 16V/3A