MA102
Magnetic Angular Position SensorThe MA102 is a magnetic angular position sensor from Monolithic Power Systems. View the full MA102 datasheet below including key specifications.
MA102 shares its datasheet with MA730, whose page lists every part number it covers.
Official MA102 datasheet (PDF) — the source this page was extracted from.
MA102 Key Specifications
| Parameter | Value |
|---|---|
| Sample rate | up to 1μs |
| Latency | 10μs at 100kRPM |
| Resolution | up to 14 bits |
| Rotation speed | 0 to >100kRPM |
| Power consumption | 12mA (at 3.3V) |
| MA8xx family effective angle resolution | 8 bit |
| MA1xx/MA3xx family effective angle resolution | 9-14 bit (MA330), 12 bit (MA102, MA302, MA310) |
| MA850 PWM frequency | ~50kHz |
MA102 Overview
Part: MagAlpha family — MPS (Monolithic Power Systems)
Type: Magnetic Angle Position Sensors
Description: The MPS MagAlpha family offers magnetic angle position sensors utilizing the patented SpinAxis™ Hall measurement technique for instantaneous digital angle position, supporting rotation speeds from zero to over 100kRPM with resolutions up to 14 bits.
Operating Conditions:
- Supply voltage: 3.3V
- Operating temperature: -40 to +125°C
- Magnetic field range: 15mT to 150mT (working range)
Absolute Maximum Ratings:
Key Specs:
- Sample rate: up to 1μs
- Latency: 10μs at 100kRPM
- Resolution: up to 14 bits
- Rotation speed: 0 to >100kRPM
- Power consumption: 12mA (at 3.3V)
- MA8xx family effective angle resolution: 8 bit
- MA1xx/MA3xx family effective angle resolution: 9-14 bit (MA330), 12 bit (MA102, MA302, MA310)
- MA850 PWM frequency: ~50kHz
Features:
- Instantaneous angle sensing
- High resolution up to 14 bits
- Support for end-of-shaft and side-of-shaft topologies
- Low power consumption
- Non-volatile memory for configuration parameters
- Programmable threshold magnetic field strength detection (push-button functionality)
- SPI/SSI digital angle output
- ABZ incremental interface
- PWM output
- UVW commutation signals with programmable pole pairs
- Magnetic field strength monitoring for diagnostics
- Selectable digital filter bandwidths (MA330)
Applications:
- Rotary Human-Machine-Interface (HMI) applications (e.g., rotary knobs)
- Brushless DC (BLDC) motor control
- Servo motor position control
- Process automation
- Robotics
- Automotive actuators
- Power tools
Package:
- QFN-16 (3x3mm)
MA102 Features
- SPI interface for direct digital angle reading and chip configuration
- ABZ encoder interface with up to 1024 pulses per channel per turn
- UVW commutation interface with pole pair emulation from a simple two-pole magnet
- Magnetic field strength monitoring for diagnostics
- One-time programmable or reprogrammable non-volatile memory for storage of zero position and other programmable chip configuration parameters
Figure 8: MagAlpha MA3xx Block Diagram
MA102 Applications
An example of a complete miniature servo drive implementation using the MA302 is shown in Figure 9.
Figure 9: Servo Motor Example using the MA3xx Sensor
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| MA302 | Monolithic Power Systems | QFN-16 3x3mm |
| MA310 | Monolithic Power Systems | QFN-16 3x3mm |
| MA330 | Monolithic Power Systems | QFN-16 3x3mm |
| MA730 | Monolithic Power Systems | QFN-16 (3x3mm) |
| MA800 | Monolithic Power Systems | QFN-16 3x3mm |
| MA820 | Monolithic Power Systems | QFN-16 3x3mm |
| MA850 | Monolithic Power Systems | QFN-16 3x3mm |
More datasheets
Ask your AI agent about the MA102
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the MA102 run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.