MP1584EN

Buck Converter

The MP1584EN is a buck converter from Monolithic Power Systems. View the full MP1584EN datasheet below including key specifications.

Official MP1584EN datasheet (PDF) — the source this page was extracted from.

Manufacturer

Monolithic Power Systems

MP1584EN Key Specifications

Parameter	Value
Input voltage range	4.5–28 V
Output voltage range	0.8–20 V
Max. output current	3 A
Idle current	0.2–1 mA

MP1584EN Overview

Part: MP1584EN

Type: Buck Converter

Description: 4.5–28 V input, 0.8–20 V adjustable output, 3 A buck converter.

Operating Conditions:

Supply voltage: 4.5–28 V
Output voltage: 0.8–20 V, adjustable

Absolute Maximum Ratings:

Max supply voltage: 28 V
Max continuous current: 3 A

Key Specs:

Input voltage range: 4.5–28 V
Output voltage range: 0.8–20 V
Max. output current: 3 A
Idle current: 0.2–1 mA
Output voltage needs to be at least 1 V below the input voltage

Features:

Adjustable output voltage
Very low idle current
Thermal vias under the switching IC

Package:

Module size: 22.1mm x 16.8mm x 6mm

Other Switching Regulators (Buck)

TPS54302 – Texas Instruments, Synchronous Step-Down Converter
MAX20730 – Analog Devices, Synchronous Switching Regulator
TLV62568 – Texas Instruments, Synchronous Buck Converter
LM2596 – onsemi, Step-Down Voltage Regulator
AP63203WU – Diodes Incorporated, Synchronous Buck Converter
TPS562200 – Texas Instruments, Synchronous Buck Converter
MP2344GJ-Z – Monolithic Power Systems, Synchronous Step-Down Converter
ME6211C33M5G – Nanjing Micro One, CMOS LDO Voltage Regulator

All Switching Regulators (Buck) datasheets All Monolithic Power Systems datasheets (40)

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the MP1584EN

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the MP1584EN run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.