Sensors Datasheets

NTCG064EF104HTBX

TDK

100 kohm multilayer chip NTC thermistor, +/-3% resistance tolerance, B constant 4250 K (25/50 C), JIS 0603 [EIA 0201] size, rated for -40 to 125 C

OPT3001

Texas Instruments

Single-chip digital lux meter with human-eye spectral response and >99% IR rejection, measuring 0.01 to 83k lux with automatic full-scale ranging over an I2C/SMBus interface

PZEM004T

Peacefair

Peacefair PZEM-004T V3.0 AC multi-function energy monitor module measuring voltage, current, active power, energy, frequency and power factor, with a serial (Modbus-RTU) interface and 10A shunt or 100A external CT options.

QMC5883L-TR

Not explicitly stated in provided pages

Three-axis magneto-resistive (AMR) magnetic sensor with 16-bit ADC and I2C interface for compassing, navigation and gaming applications

RPR-0521RS

Rohm Semiconductor

SENSOR OPT AMBIENT 8 SMD

S-57RB

ABLIC

AEC-Q100 qualified, 150°C operation, high-withstand-voltage, high-speed bipolar Hall effect latch IC with reverse voltage protection and output current limit, available with Nch open-drain or Nch driver plus built-in pull-up resistor output

S-57RB1L8S-A6T8U

ABLIC

Automotive AEC-Q100, 150°C, high-speed bipolar Hall effect latch IC with Nch driver and built-in 1.2 kΩ pull-up resistor output, VOUT = "L" at S pole detection, BOP = 2.2 mT typ.

S-57RB1L8S-L3T2U

ABLIC

Automotive AEC-Q100 grade 0 bipolar Hall effect latch IC with Nch driver output and built-in 1.2 kΩ pull-up resistor, 2.2 mT typ. BOP, operating up to 150°C

S-57RBNL1S-A6T8U

ABLIC

Automotive-grade (AEC-Q100), 150°C, high-withstand-voltage, high-speed bipolar Hall effect latch IC with Nch open-drain output, VOUT = "L" at S pole detection, BOP = 3.0 mT typ.

S-57RBNL8S-A6T8U

ABLIC

Automotive-grade (AEC-Q100), 150°C, high-withstand-voltage, high-speed bipolar Hall effect latch IC with Nch open-drain output and S-pole detection output logic VOUT = "L"

S-57RBNL8S-L3T2U

ABLIC

Automotive AEC-Q100, 150°C, high-voltage, high-speed bipolar Hall effect latch IC with Nch open-drain output, VOUT = L at S pole detection, BOP = 2.2 mT typ.

S-57RBNL9S-A6T8U

ABLIC

Automotive AEC-Q100, 150°C, high-voltage, high-speed bipolar Hall effect latch IC with Nch open-drain output, VOUT = L at S pole detection, BOP = 0.5 mT typ.

SCD40

Sensirion

Miniature photoacoustic NDIR CO2 sensor with integrated temperature and humidity sensing and a digital I2C interface, reflow solderable SMD; base-accuracy SCD40 variant specified for 400-2000 ppm.

SCD40-D-R1

Sensirion

Air Quality Sensors Sensirion photoacoustic CO2 sensor

SCD40-D-R2

Sensirion

Air Quality Sensors Sensirion photoacoustic CO2 sensor

SCD41

ABB Electrification (Thomas and Betts)

COMP STIRRUP W/CONTAX 3/0-3/0 AS

SGP40

Sensirion

Digital MOx-based indoor air quality sensor with I2C interface and temperature-controlled micro hotplate, providing a humidity-compensated VOC raw signal for use with Sensirion's VOC Index algorithm.

SHT30-DIS-P10KS

Sensirion

SHT30-DIS humidity and temperature sensor with polyimide protective cover option that seals the sensor opening during reflow, conformal coating and potting; delivered in 10,000-piece tape and reel (order no. 1-101326-01)

SHT30-LSS-P10KS

Sensirion

SHT30-LSS humidity/temperature sensor delivered with an optional polyimide protective cover over the sensor opening, protecting against pollution during assembly and conformal coating; removable with tweezers; 10,000-unit tape and reel.

SHT30-LSS-P2.5KS

Sensirion

SHT30-LSS digital relative humidity and temperature sensor supplied with a removable polyimide protective cover option (2,500-unit tape and reel) that shields the sensor opening during assembly and conformal coating.

SHT31

Sensirion

The SHT3x-DIS is the next generation of Sensirion's temperature and humidity sensors, offering fully calibrated digital output, wide supply voltage, I2C interface, and improved accuracy.

SHT31-DIS-P10KS

Sensirion

SHT31-DIS with polyimide protective cover option (10,000-unit reel) that seals the sensor opening against pollution during assembly and conformal coating, removable with tweezers after assembly.

SHT31-DIS-P2.5KS

Sensirion

Polyimide protective cover option for the SHT31-DIS humidity and temperature sensor that shields the sensor opening during SMT assembly and conformal coating; removable with tweezers at end-of-line.

SHT35

Sensirion

Fully calibrated, linearized digital relative humidity and temperature sensor with I2C interface; SHT35 variant offers typical accuracy of ±1.5 %RH and ±0.1 °C in a tiny 8-pin DFN package.

SHT3X-DIS

Sensirion

Fully calibrated, linearized digital I2C relative humidity and temperature sensor from Sensirion's SHT3x family (SHT30/31/35) in an 8-pin DFN package

SHT40

Sensirion

4th-generation high-accuracy, ultra-low-power 16-bit digital relative humidity and temperature sensor with I2C interface and variable power heater

SHT85

Sensirion

Sensirion SHT85 digital relative humidity and temperature sensor; this document is a design-in guide covering housing/PCB layout rules (heat decoupling, airflow, dead volume, sealing) for SHTxx sensors.

SHTC3

Sensirion

Board Mount Humidity Sensors Humidity and Temperature Sensor

SI7021-A10

Silicon Labs

SI7021-A10-GM

Silicon Labs