Skip to main content

We use cookies to understand how you use our site and improve your experience. See our Privacy Policy.

SHT85

Humidity and Temperature Sensor

The SHT85 is a humidity and temperature sensor from Sensirion. View the full SHT85 datasheet below including key specifications.

Official SHT85 datasheet (PDF) — the source this page was extracted from.

Manufacturer

Sensirion

Category

Sensors

SHT85 Key Specifications

ParameterValue
InterfaceDigital (factory calibrated)
Measured QuantitiesRelative humidity and temperature

SHT85 Overview

Part: SHTxx and STSxx — Sensirion

Type: Humidity and Temperature Sensors

Description: High-quality humidity and temperature sensors with digital interface and factory calibration, designed for easy implementation and full interchangeability, requiring careful housing and PCB design for optimal performance to avoid significant temperature and humidity deviations and increased response times.

Features:

  • High quality
  • Digital interface
  • Factory calibration
  • Full interchangeability
  • Protection options for harsh environments (IP67 filter membrane, SF2 filter cap)

SHT85 Thermal Information

To achieve a good thermal coupling between the sensor and the environment the sensor should be placed as close to the environment as possible - best at a corner or at least at the edge of the device. An airstream of ambient air will additionally increase the coupling.

Other Sensors

  • ICM-20948 – TDK InvenSense, 9-axis MotionTracking device
  • MPU-6050 – TDK InvenSense, 6-Axis MEMS IMU
  • MAX30102 – Analog Devices, Pulse Oximetry and Heart-Rate Monitor Module
  • MPU-9250 – TDK InvenSense, 9-Axis MotionTracking IMU
  • ZMPT101B – Zmpt, Voltage Sensor Module
  • AD5941 – Analog Devices, High Precision, Impedance, and Electrochemical Front End
  • AH3722 – Diodes Incorporated, Hall-effect latch IC
  • AH3722-P-A – Diodes Incorporated, Hall-effect latch IC

All Sensors datasheetsAll Sensirion datasheets (20)

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the SHT85

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the SHT85 run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.