Sensirion Datasheets

SHT30

Sensirion

Fully calibrated, linearized digital relative humidity and temperature sensor with I2C interface in a tiny 8-pin DFN package (SHT30 variant, typ. ±2 %RH and ±0.2 °C accuracy)

SGP30

Sensirion

Fast NPT-technology 600V, 30A IGBT with 75% lower turn-off energy than the previous generation, low conduction losses and 10 µs short circuit withstand time, designed for motor controls and inverters.

SHT31-DIS-B2.5kS

Sensirion

Humidity/Temperature Sensor Digital Serial (I2C) 8-Pin TDFN EP T/R

SCD40

Sensirion

Miniature photoacoustic NDIR CO2 sensor with integrated temperature and humidity sensing and a digital I2C interface, reflow solderable SMD; base-accuracy SCD40 variant specified for 400-2000 ppm.

SCD40-D-R1

Sensirion

Air Quality Sensors Sensirion photoacoustic CO2 sensor

SCD40-D-R2

Sensirion

Air Quality Sensors Sensirion photoacoustic CO2 sensor

SGP40

Sensirion

Digital MOx-based indoor air quality sensor with I2C interface and temperature-controlled micro hotplate, providing a humidity-compensated VOC raw signal for use with Sensirion's VOC Index algorithm.

SHT30-DIS-P10KS

Sensirion

SHT30-DIS humidity and temperature sensor with polyimide protective cover option that seals the sensor opening during reflow, conformal coating and potting; delivered in 10,000-piece tape and reel (order no. 1-101326-01)

SHT30-DIS-P2.5KS

Sensirion

Board Mount Humidity Sensors RH/ T Sensor

SHT30-LSS-P10KS

Sensirion

SHT30-LSS humidity/temperature sensor delivered with an optional polyimide protective cover over the sensor opening, protecting against pollution during assembly and conformal coating; removable with tweezers; 10,000-unit tape and reel.

SHT30-LSS-P2.5KS

Sensirion

SHT30-LSS digital relative humidity and temperature sensor supplied with a removable polyimide protective cover option (2,500-unit tape and reel) that shields the sensor opening during assembly and conformal coating.

SHT31

Sensirion

The SHT3x-DIS is the next generation of Sensirion's temperature and humidity sensors, offering fully calibrated digital output, wide supply voltage, I2C interface, and improved accuracy.

SHT31-DIS-B

Sensirion

Polyimide foil protective cover for SHT3x humidity and temperature sensors, designed to shield the sensor during assembly and conformal coating processes.

SHT31-DIS-P10KS

Sensirion

SHT31-DIS with polyimide protective cover option (10,000-unit reel) that seals the sensor opening against pollution during assembly and conformal coating, removable with tweezers after assembly.

SHT31-DIS-P2.5KS

Sensirion

Polyimide protective cover option for the SHT31-DIS humidity and temperature sensor that shields the sensor opening during SMT assembly and conformal coating; removable with tweezers at end-of-line.

SHT35

Sensirion

Fully calibrated, linearized digital relative humidity and temperature sensor with I2C interface; SHT35 variant offers typical accuracy of ±1.5 %RH and ±0.1 °C in a tiny 8-pin DFN package.

SHT3X-DIS

Sensirion

Fully calibrated, linearized digital I2C relative humidity and temperature sensor from Sensirion's SHT3x family (SHT30/31/35) in an 8-pin DFN package

SHT40

Sensirion

4th-generation high-accuracy, ultra-low-power 16-bit digital relative humidity and temperature sensor with I2C interface and variable power heater

SHT85

Sensirion

Sensirion SHT85 digital relative humidity and temperature sensor; this document is a design-in guide covering housing/PCB layout rules (heat decoupling, airflow, dead volume, sealing) for SHTxx sensors.

SHTC3

Sensirion

Board Mount Humidity Sensors Humidity and Temperature Sensor