RPR-0521RS

Part: RPR-0521RS — ROHM ELECTRONICS DALIAN CO., LTD.

Type: Optical Proximity Sensor and Ambient Light Sensor with IrLED

Description: A module integrating an optical proximity sensor, a digital ambient light sensor IC, and an infrared LED (IrLED), featuring I2C bus interface, 1.8V logic compatibility, and low current consumption.

Operating Conditions:

• Supply voltage: 2.5–3.6 V
• Operating temperature: -25 to 85 °C
• VLEDA Voltage: 2.8–5.5 V
• I2C SCL Clock Frequency: 0–400 kHz

Absolute Maximum Ratings:

• Max supply voltage: 4.5 V
• Max SDA, SCL Terminal Voltage: 4.5 V
• Max LEDA, LDR, INT Terminal Voltage: 7 V
• Max INT, SDA Sink Current: 7 mA
• Max storage temperature: -30 to 85 °C

Key Specs:

• Supply current for ALS: 90 μA (Typ, EV = 10 lx)
• Supply current for PS: 90 μA (Typ, MODE_CONTROL(41h) = 49h)
• Standby mode current: 1.0 μA (Typ, MODE_CONTROL(41h) = 00h)
• Calculated Lx: 10 lx (Typ, EV = 10 lx)
• PS sensor out (d=50mm): 80 count (Typ, LED current = 100mA)
• ILED pulse duration 1: 200 μs (Typ, MODE_CONTROL(41h) = 49h)
• LED Forward Voltage: 1.6 V (Typ, LED current = 100mA)
• LED Peak Emission Wavelength: 940 nm (Typ)

Features:

• Compatible to I2C bus interface (f/s mode support)
• Compatible to 1.8V logic interface
• Low Current consumption by power down function/mode
• Two ALS outputs for visible light (Data0) and infrared light (Data1)
• Correspond to very wide range of light intensity
• Rejecting 50Hz/60Hz light noise (ALS function)
• Detection range of proximity sensor is around 1 - 100mm (adjustable by I2C)
• Built-in current configurable IrLED driver

Applications:

• Smart phone
• Mobile phone
• Digital Still Camera
• Portable game
• Camcoder
• PDA
• LCD display

Package:

• 8-pin package (dimensions in mm, tolerance ±0.2mm)

• 1. Compatible to I 2 C bus interface ( f/s mode support )
• 1. Compatible to 1.8V logic interface
• 1. Low Current consumption by power down function/mode
• 1. There are two ALS outputs; peaks of spectrum responses are in visible light (Data0) and in infrared light (Data1) for calculating illuminance.
• 1. Correspond to very wide range of light intensity
• 1. Rejecting 50Hz/60Hz light noise (ALS function)
• 1. Detection range of proximity sensor is around 1 - 100mm (adjustable by I 2 C)
• 1. Built-in current configurable IrLED driver

( VDD= 3.0V, Ta = 25 °C , and all registers are default unless otherwise noted. )

*1 White LED is used as optical source. 'Lx' is calculated from ADC count valus.

Object: 90% reflective white sheet (50×50mm Kodak Gray Card Plus)

Distance between the object and the product is 50mm. No glass or apertures is above the product.

• Transmitter Electrical characteristics ( Ta = 25 °C , unless otherwise noted. )
• I 2 C bus timing characteristics ( VDD= 3.0V, Ta = 25 °C , unless otherwise noted. )