QMC5883L-TR

3-Axis Magnetic Sensor

The QMC5883L-TR is a 3-axis magnetic sensor from Not explicitly stated in provided pages. View the full QMC5883L-TR datasheet below including key specifications, absolute maximum ratings.

QMC5883L-TR shares its datasheet with QMC5883L, whose page lists every part number it covers.

Official QMC5883L-TR datasheet (PDF) — the source this page was extracted from.

Manufacturer

Not explicitly stated in provided pages

QMC5883L-TR Key Specifications

Parameter	Value
Sensitivity	12000 LSB/G (±2G), 3000 LSB/G (±8G)
ADC Resolution	16-bit
Standby Current	3 µA typ
Field Resolution	2 mGauss
Output Data Rate	10Hz to 200Hz (programmable)
Package Dimensions	3mm x 3mm x 0.9mm
I/O Voltage (VDDIO)	1.65V to 3.6V
Magnetic Field Range	±2 Gauss or ±8 Gauss (programmable)
Supply Voltage (VDD)	2.16V to 3.6V
Operating Temperature	-40°C to 85°C
Communication Interface	I2C (Standard and Fast modes)
Continuous Mode Current	75 µA typ at 10Hz ODR (low power mode)
Compass Heading Accuracy	1° to 2°

QMC5883L-TR Overview

Part: QMC5883L

Type: 3-Axis Magnetic Sensor

Description: A multi-chip three-axis magnetic sensor with integrated magnetic sensors and signal condition ASIC, featuring 16-bit ADC, ±8 Gauss field range, temperature compensation, and I²C interface, enabling 1° to 2° compass heading accuracy.

Operating Conditions:

Supply voltage: 2.16–3.6 V
I/O Voltage: 1.65–3.6 V
Operating temperature: -40 to 85 °C
Output Data Rate: 10–200 Samples/sec

Absolute Maximum Ratings:

Max VDDIO: 5.4 V
Max VDD: 5.4 V
Max storage temperature: 125 °C
Exposed to Magnetic Field (all directions): 50000 Gauss

Key Specs:

Standby Current: 3 μA (Typ)
Continuous Mode Current (ODR=10Hz, Low Power Mode): 75 μA (Typ)
Peak Current in Active State: 2.6 mA (Typ)
Sensor Field Range: ±8 Gauss
Digital Resolution Field Resolution: 2 mGauss (Typ)
Sensitivity (Field Range = ±2G): 12000 LSB/G (Typ)
Linearity (Field Range = ±2G): 0.1 %FS (Typ)
X-Y-Z Orthogonality: 90±1 degree (Typ)

Features:

3-Axis Magneto-Resistive Sensors
16 Bit ADC With Low Noise AMR Sensors
Wide Magnetic Field Range (± 8 Gauss)
Temperature Compensated Data Output and Temperature Output
I²C Interface with Standard and Fast Modes
Wide Range Operation Voltage (2.16V To 3.6V)
Low Power Consumption (75 μA)
Maximum 200Hz Data Output Rate
Offset cancellation
Self-aligned magnetic field to restore magnetic state

Applications:

Compassing
Navigation
Gaming in drone, robot, mobile and personal hand-held devices
LBS Applications

Package:

16-pin Land Grid Array (LGA) (3x3x0.9mm)

QMC5883L-TR Absolute Maximum Ratings

Table 3. Absolute Maximum Ratings (Tested at 25° C except stated otherwise.)

Parameter	MIN.	MAX.	Units
VDDIO	-0.3	5.4	V
VDD	-0.3	5.4	V
Storage Temperature	-40	125	°C
Exposed to Magnetic Field (all directions)		50000	Gauss
Reflow Classification	MSL 3, 260 C Peak Temperature	MSL 3, 260 C Peak Temperature	MSL 3, 260 C Peak Temperature

Variants on the same datasheet

These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.

Part Number	Manufacturer	Package
QMC5883L	Not explicitly stated in provided pages	LGA-16

Other Sensors

ICM-20948 – TDK InvenSense, 9-axis MotionTracking device
MPU-6050 – TDK InvenSense, 6-Axis MEMS IMU
MPU-9250 – TDK InvenSense, 9-Axis MotionTracking IMU
MAX30102 – Analog Devices, Pulse Oximetry and Heart-Rate Monitor Module
AD5941 – Analog Devices, High Precision, Impedance, and Electrochemical Front End
AH3722 – Diodes Incorporated, Hall-effect latch IC
AH3722-P-A – Diodes Incorporated, Hall-effect latch IC
AH3722-P-B – Diodes Incorporated, Hall-effect latch IC

All Sensors datasheets

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the QMC5883L-TR

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the QMC5883L-TR run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.