Motor Drivers Datasheets

DRV8833

Texas Instruments

Dual H-bridge current-control motor driver that can drive two DC motors or one stepper motor, with PWM winding current regulation and integrated fault protection.

DRV8876

Texas Instruments

N-channel H-bridge brushed DC motor driver with integrated current sensing, current regulation, proportional current output (IPROPI), and protection features, supporting 4.5 V to 37 V supply and 3.5 A peak output current.

TB6612FNG

Toshiba

Dual H-bridge DC motor driver IC with low ON-resistance LD MOS output transistors, supporting CW/CCW/short brake/stop modes, standby, thermal shutdown and undervoltage detection

A4988

Allegro MicroSystems

DMOS microstepping driver with built-in translator for bipolar stepper motors, supporting full to 1/16 step modes with up to 35 V and ±2 A output drive

DRV2605YZFR.A

Texas Instruments

I2C-controlled haptic driver for ERM and LRA actuators with built-in Immersion TouchSense 2200 effect library, smart-loop architecture with auto resonance tracking, overdrive/braking, and audio-to-vibe.

DRV2605YZFT.A

Texas Instruments

I2C-controlled haptic driver for ERM and LRA actuators with built-in Immersion TouchSense 2200 effect library and smart-loop architecture (auto resonance tracking, overdrive/braking, calibration)

DRV8302

Texas Instruments

Three-phase MOSFET gate driver with two integrated current shunt amplifiers and a 1.5A buck regulator, hardware-controlled, for BLDC/PMSM motor drive

DRV8302DCA

Texas Instruments

Three-phase BLDC/PMSM gate driver for external N-channel MOSFETs with dual current shunt amplifiers, integrated 1.5A buck regulator, and hardware-configured protection

DRV8825

Texas Instruments

PWM microstepping bipolar stepper motor driver with built-in indexer (up to 1/32 microstepping), dual H-bridge, STEP/DIR interface and 2.5-A max drive current

DRV8825PWP

Texas Instruments

DRV8825PWPR

Texas Instruments

IC MTR DRVR BIPLR 8.2-45V 28SSOP

DRV8825PWPR.A

Texas Instruments

DRV8825PWPR.B

Texas Instruments

DRV8825PWPRG4

Texas Instruments

DRV8833PW

Texas Instruments

DRV8833PWP

Texas Instruments

IC MOTOR DRIVER PAR 16HTSSOP

DRV8833PWPR.B

Texas Instruments

DRV8833PWPRG4

Texas Instruments

Motor/Motion/Ignition Controllers & Drivers 10.8-V 2-A dual H-b ridge motor driver w

DRV8833PWR

Texas Instruments

Motor/Motion/Ignition Controllers & Drivers 10.8-V 2-A dual H-b ridge motor driver w A 595-DRV8833PW

DRV8833PWR.B

Texas Instruments

DRV8833RTYR

Texas Instruments

DRV8833RTYR.B

Texas Instruments

DRV8833RTYRG4

Texas Instruments

Motor/Motion/Ignition Controllers & Drivers 10.8-V 2-A dual H-b ridge motor driver w

DRV8833RTYT

Texas Instruments

DRV8833RTYT.B

Texas Instruments

DRV8876-Q1

Texas Instruments

Automotive-qualified (Q100) N-channel H-bridge brushed DC motor driver with integrated current sense, proportional current output (IPROPI) and current regulation; this datasheet is the commercial DRV8876, which lists DRV8876-Q1 as its quali

DRV8876PWPR.A

Texas Instruments

N-channel H-bridge motor driver with integrated current sensing and regulation, 700-mΩ total RDS(on), 3.5-A peak output, for brushed DC motors and other resistive/inductive loads

DRV8876PWPT

Texas Instruments

N-channel H-bridge brushed DC motor driver with integrated current sensing, current regulation, proportional current output (IPROPI), and protection features, 3.5 A peak output

DRV8876RGTR

Texas Instruments

H-Bridge Motor Driver with Integrated Current Sense and Regulation 4.5V to 37V 16-Pin VQFN Tray

DRV8876RGTR.A

Texas Instruments

N-channel H-bridge motor driver with integrated current sensing and regulation, 700-mΩ total RDS(on), 3.5-A peak output, 4.5-V to 37-V supply