DRV8825PWP
Stepper Motor Controller ICThe DRV8825PWP is a stepper motor controller ic from Texas Instruments. View the full DRV8825PWP datasheet below including electrical characteristics, absolute maximum ratings.
Manufacturer
Texas Instruments
Category
Motor DriversOverview
Part: DRV8825, Texas Instruments
Type: PWM Microstepping Stepper Motor Driver
Description: 8.2–45 V input, 2.5 A continuous output, microstepping stepper motor driver with integrated H-bridges and indexer, supporting up to 1/32 microstepping.
Operating Conditions:
- Supply voltage: 8.2–45 V
- Operating temperature: -40 to 85 °C
- VREF input voltage: 1–3.5 V
- Max step frequency: 250 kHz
Absolute Maximum Ratings:
- Max supply voltage: 47 V
- Max continuous current: 2.5 A
- Max junction/storage temperature: 150 °C
Key Specs:
- VM operating supply current: 5 mA (Typ, V(VMx) = 24 V)
- VM sleep mode supply current: 10 μA (Typ, V(VMx) = 24 V)
- V3P3OUT voltage: 3.2 V (Min), 3.3 V (Typ), 3.4 V (Max) (IOUT = 0 to 1 mA)
- HS FET on resistance: 0.2 Ω (Typ, V(VMx) = 24 V, I O = 1 A, T J = 25°C)
- LS FET on resistance: 0.2 Ω (Typ, V(VMx) = 24 V, I O = 1 A, T J = 25°C)
- Internal current control PWM frequency: 30 kHz (Typ)
- Overcurrent protection trip level: 3 A (Min)
- Thermal shutdown temperature: 150 °C (Min, Die temperature)
Features:
- PWM Microstepping Stepper Motor Driver
- Built-In Microstepping Indexer (Up to 1/32 Microstepping)
- Multiple Decay Modes (Mixed, Slow, Fast)
- Simple STEP/DIR Interface
- Low Current Sleep Mode
- Built-In 3.3-V Reference Output
- Protection Features (Overcurrent Protection (OCP), Thermal Shutdown (TSD), VM Undervoltage Lockout (UVLO), Fault Condition Indication Pin (nFAULT))
Applications:
- Automatic Teller Machines
- Money Handling Machines
- Video Security Cameras
- Printers
- Scanners
- Office Automation Machines
- Gaming Machines
- Factory Automation
- Robotics
Package:
- HTSSOP (28) (9.70 mm × 6.40 mm)
Features
- 1 · PWM Microstepping Stepper Motor Driver
- -Built-In Microstepping Indexer
- -Up to 1/32 Microstepping
- Multiple Decay Modes
- -Mixed Decay
- -Slow Decay
- -Fast Decay
- 8.2-V to 45-V Operating Supply Voltage Range
- 2.5-A Maximum Drive Current at 24 V and TA = 25°C
- Simple STEP/DIR Interface
- Low Current Sleep Mode
- Built-In 3.3-V Reference Output
- Small Package and Footprint
- Protection Features
- -Overcurrent Protection (OCP)
- -Thermal Shutdown (TSD)
- -VM Undervoltage Lockout (UVLO)
- -Fault Condition Indication Pin (nFAULT)
Applications
- Automatic Teller Machines
- Money Handling Machines
- Video Security Cameras
- Printers
- Scanners
- Office Automation Machines
- Gaming Machines
- Factory Automation
- Robotics
Pin Configuration
Electrical Characteristics
over operating free-air temperature range of -40°C to 85°C (unless otherwise noted)
| PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT | |
|---|---|---|---|---|---|---|
| POWER | SUPPLIES | |||||
| I VM | VM operating supply current | V (VMx) = 24 V | 5 | 8 | mA | |
| I VMQ | VM sleep mode supply current | V (VMx) = 24 V | 10 | 20 | μ A | |
| V3P3OUT REGULATOR | ||||||
| V 3P3 | V3P3OUT voltage | IOUT = 0 to 1 mA | 3.2 | 3.3 | 3.4 | V |
| LOGIC-LEVEL | INPUTS | |||||
| V IL | Input low voltage | 0 | 0.7 | V | ||
| V IH | Input high voltage | 2.2 | 5.25 | V | ||
| V HYS | Input hysteresis | 0.3 | 0.45 | 0.6 | V | |
| I IL | Input low current | VIN = 0 | -20 | 20 | μ A | |
| I IH | Input high current | VIN = 3.3 V | 100 | μ A | ||
| R PD | Internal pulldown resistance | 100 | k Ω | |||
| nHOME, nFAULT OUTPUTS (OPEN-DRAIN | OUTPUTS) | |||||
| V OL | Output low voltage | I O = 5 mA | 0.5 | V | ||
| I OH | Output high leakage current | V O = 3.3 V | 1 | μ A | ||
| DECAY | INPUT | |||||
| V IL | Input low threshold voltage | For slow decay mode | 0.8 | V | ||
| V IH | Input high threshold voltage | For fast decay mode | 2 | V | ||
| I IN | Input current | -40 | 40 | μA | ||
| R PU | Internal pullup resistance (to 3.3 V) | 130 | k Ω | |||
| R PD | Internal pulldown resistance | 80 | k Ω | |||
| H-BRIDGE | FETS | |||||
| R DS(ON) | V (VMx) = 24 V, I O = 1 A, T J = 25°C | 0.2 | ||||
| R DS(ON) | HS FET on resistance | V (VMx) = 24 V, I O = 1 A, T J = 85°C | 0.25 | 0.32 | ||
| R DS(ON) | V (VMx) = 24 V, I O = 1 A, T J = 25°C | 0.2 | Ω | |||
| LS FET on resistance | V (VMx) = 24 V, I O = 1 A, T J = 85°C | 0.25 | 0.32 | |||
| I OFF | Off-state leakage current | -20 | 20 | μ A | ||
| MOTOR | DRIVER | |||||
| ƒ PWM | Internal current control PWM frequency | 30 | kHz | |||
| t BLANK | Current sense blanking time | 4 | μ s | |||
| t R | Rise time | 30 | 200 | ns | ||
| t F | Fall time | 30 | 200 | ns | ||
| PROTECTION | CIRCUITS | |||||
| V UVLO | VM undervoltage lockout voltage | V (VMx) rising | 7.8 | 8.2 | V | |
| I OCP | Overcurrent protection trip level | 3 | A | |||
| t DEG | Overcurrent deglitch time | 3 | μs | |||
| t TSD | Thermal shutdown temperature | Die temperature | 150 | 160 | 180 | °C |
| CURRENT | CONTROL | |||||
| I REF | xVREF input current | V (xVREF) = 3.3 V | -3 | 3 | μ A | |
| V TRIP | xISENSE trip voltage | V (xVREF) = 3.3 V, 100% current setting V (xVREF) = 3.3 V, 5% current setting | 635 -25% | 660 | 685 25% | mV |
| Δ I | Current trip accuracy | V (xVREF) = 3.3 V, 10% to 34% current setting | -15% | 15% | ||
| TRIP | (relative to programmed value) | V (xVREF) = 3.3 V, 38% to 67% current setting | -10% | 10% | ||
| TRIP | V (xVREF) = 3.3 V, 71% to 100% current setting | -5% | 5% | |||
| A ISENSE Current sense amplifier | gain | Reference only | 5 | V/V |
Absolute Maximum Ratings
| MIN | MAX | UNIT | ||
|---|---|---|---|---|
| V (VMx) | Power supply voltage | -0.3 | 47 | V |
| V (VMx) | Power supply ramp rate | 1 | V/μs | |
| Digital pin voltage | -0.5 | 7 | V | |
| V (xVREF) | Input voltage | -0.3 | 4 | V |
| ISENSEx pin voltage (3) | -0.8 | 0.8 | V | |
| Peak motor drive output current, t < 1 μ s | Internally limited | Internally limited | A | |
| Continuous motor drive output current (4) | 0 | 2.5 | A | |
| Continuous total power dissipation | See Thermal Information | See Thermal Information | ||
| T J | Operating junction temperature range | -40 | 150 | °C |
- (2) All voltage values are with respect to network ground terminal.
(3) Transients of ±1 V for less than 25 ns are acceptable
(4) Power dissipation and thermal limits must be observed.
Recommended Operating Conditions
| MIN | NOM | MAX | UNIT | ||
|---|---|---|---|---|---|
| V (VMx) | Motor power supply voltage range (1) | 8.2 | 45 | V | |
| V (VREF) | VREF input voltage (2) | 1 | 3.5 | V | |
| I V3P3 | V3P3OUT load current | 0 | 1 | mA |
Thermal Information
| THERMAL METRIC (1) | DRV8825 PWP | UNIT | |
|---|---|---|---|
| 28 PINS | |||
| R θ JA | Junction-to-ambient thermal resistance (2) | 31.6 | °C/W |
| R θ JC(top) | Junction-to-case (top) thermal resistance (3) | 15.9 | °C/W |
| R θ JB | Junction-to-board thermal resistance (4) | 5.6 | °C/W |
| ψ JT | Junction-to-top characterization parameter (5) | 0.2 | °C/W |
| ψ JB | Junction-to-board characterization parameter (6) | 5.5 | °C/W |
| R θ JC(bot) | Junction-to-case (bottom) thermal resistance (7) | 1.4 | °C/W |
Spacer
Typical Application
The DRV8825 is used in bipolar stepper control. The microstepping motor driver provides additional precision and a smooth rotation from the stepper motor. The following design is a common application of the DRV8825.
Package Information
SMALL OUTLINE PACKAGE
Related Variants
The following components are covered by the same datasheet.
| Part Number | Manufacturer | Package |
|---|---|---|
| DRV8825 | Texas Instruments | — |
| DRV8825PWPR | Texas Instruments | 28-PowerTSSOP (0.173", 4.40mm Width) |
| DRV8825PWPR.A | Texas Instruments | — |
| DRV8825PWPR.B | Texas Instruments | — |
| DRV8825PWPRG4 | Texas Instruments | — |
Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.
Get structured datasheet data via API
Get started free