Skip to main content

We use cookies to understand how you use our site and improve your experience. See our Privacy Policy.

ESP32-D0WD-V3

Wi-Fi + Bluetooth + Bluetooth LE MCU Module

The ESP32-D0WD-V3 is a wi-fi + bluetooth + bluetooth le mcu module from Espressif Systems. View the full ESP32-D0WD-V3 datasheet below including key specifications, electrical characteristics, absolute maximum ratings.

ESP32-D0WD-V3 shares its datasheet with ESP32-DevKitC-32E, whose page lists every part number it covers.

Official ESP32-D0WD-V3 datasheet (PDF) — the source this page was extracted from.

Manufacturer

Espressif Systems

Package

48-VFQFN Exposed Pad

ESP32-D0WD-V3 Key Specifications

ParameterValue
Current - Receiving95mA ~ 100mA
Current - Transmitting130mA ~ 240mA
Data Rate (Max)150Mbps
DigiKey ProgrammableNot Verified
Frequency2.412GHz ~ 2.484GHz
GPIO34
Memory Size448kB ROM, 520kB SRAM
Modulation8DPSK, DSSS, DQPSK, OFDM
Mounting TypeSurface Mount
Operating Temperature-40°C ~ 125°C
Package / Case48-VFQFN Exposed Pad
Power - Output20.5dBm
Protocol802.11b/g/n, Bluetooth 4.2
RF Family/StandardBluetooth, WiFi
Sensitivity-97dBm
Serial InterfacesADC, I2C, I2S, SDIO, SPI, PWM, UART
Supplier Device Package48-QFN (5x5)
TypeTxRx + MCU
Supply Voltage2.3V ~ 3.6V

ESP32-D0WD-V3 Overview

Part: ESP32-DevKitC-32E (ESP32 Series SoC) — Espressif Systems

Type: 2.4 GHz Wi-Fi + Bluetooth / Bluetooth LE SoC

Description: Dual-core Xtensa LX6 32-bit SoC at up to 240 MHz with 802.11b/g/n Wi-Fi (up to 150 Mbps), Bluetooth v4.2 BR/EDR + Bluetooth LE, 520 KB SRAM and 34 GPIOs.

Operating Conditions:

  • Supply voltage: 2.3–3.6 V (VDDA, VDD3P3, VDD3P3_RTC pin supply range)
  • Max CPU clock: 240 MHz
  • VDD_SDIO output: 1.8 V or same as VDD3P3_RTC

Absolute Maximum Ratings:

  • Max supply voltage: 3.6 V (VDDA, VDD3P3, VDD3P3_RTC, VDD3P3_CPU, VDD_SDIO; min −0.3 V)
  • Max continuous current: 1200 mA (cumulative IO output current)
  • Storage temperature: −40 to 150 °C

Key Specs:

  • CPU: Xtensa single-/dual-core 32-bit LX6, up to 240 MHz; 539.98 CoreMark (1 core), 1079.96 CoreMark (2 cores)
  • Memory: 448 KB ROM, 520 KB SRAM, 16 KB RTC SRAM
  • Wi-Fi: 802.11b/g/n, 2.4 GHz, up to 150 Mbps
  • Bluetooth: v4.2 BR/EDR and LE, +9 dBm transmit power, −94 dBm Bluetooth LE sensitivity
  • Deep-sleep power consumption: 10 μA
  • ADC: 12-bit SAR, up to 18 channels; two 8-bit DACs; 10 touch sensors
  • GPIOs: 34 programmable
  • Peripheral interfaces: 4 SPI, 2 I2S, 2 I2C, 3 UART, SD/eMMC/SDIO host, SDIO/SPI slave, TWAI (CAN 2.0), Ethernet MAC

Features:

  • Four virtual Wi-Fi interfaces; simultaneous Station, SoftAP and promiscuous modes
  • Class-1/2/3 Bluetooth transmitter without external power amplifier
  • Five power modes: Active, Modem-sleep, Light-sleep, Deep-sleep, Hibernation
  • Ultra-Low-Power coprocessor
  • Secure boot and flash encryption
  • 1024-bit OTP
  • AES, SHA-2, RSA and RNG hardware acceleration
  • Motor PWM, LED PWM (up to 16 channels), RMT, pulse counter

Applications:

  • Smart home
  • Industrial automation
  • Health care
  • Consumer electronics
  • Smart agriculture
  • POS machines
  • Service robots
  • Audio devices
  • IoT sensor hubs and data loggers
  • Video streaming cameras
  • Speech and image recognition
  • SDIO Wi-Fi + Bluetooth networking card

Package:

  • QFN48 (6×6 mm)
  • QFN48 (5×5 mm)

ESP32-D0WD-V3 Features

  • Programmable data transfer length, in multiples of 1 byte
  • Four-line full-duplex/half-duplex communication and three-line half-duplex communication support
  • Master mode and slave mode
  • Programmable CPOL and CPHA
  • Programmable clock

For details, see ESP32 Technical Reference Manual > Chapter SPI Controller .

For SPI, the pins are multiplexed with GPIO6 ~ GPIO11 via the IO MUX. For HSPI, the pins are multiplexed with GPIO2, GPIO4, GPIO12 ~ GPIO15 via the IO MUX. For VSPI, the pins are multiplexed with GPIO5, GPIO18 ~ GPIO19, GPIO21 ~ GPIO23 via the IO MUX.

For more information about the pin assignment, see Section 4.10 Peripheral Pin Configurations and ESP32 Technical Reference Manual > Chapter IO_MUX and GPIO Matrix .

ESP32-D0WD-V3 Applications

With low power consumption, ESP32 is an ideal choice for IoT devices in the following areas:

  • Smart Home
  • Industrial Automation
  • Health Care
  • Consumer Electronics
  • Smart Agriculture
  • POS Machines
  • Service Robot
  • Audio Devices
  • Generic Low-power IoT Sensor Hubs
  • Generic Low-power IoT Data Loggers
  • Cameras for Video Streaming
  • Speech Recognition
  • Image Recognition
  • SDIO Wi-Fi + Bluetooth Networking Card

Check the link or the QR code to make sure that you use the latest version of this document:

https://www.espressif.com/documentation/esp32_datasheet_en.pdf

ESP32-D0WD-V3 Pin Configuration

Table 4-6. Peripheral Pin Configurations

InterfaceSignalPinFunction
ADCADC1_CH0SENSOR_VPTwo 12-bit SAR ADCs
ADCADC1_CH1SENSOR_CAPPTwo 12-bit SAR ADCs
ADCADC1_CH2SENSOR_CAPNTwo 12-bit SAR ADCs
ADCADC1_CH3SENSOR_VNTwo 12-bit SAR ADCs
ADCADC1_CH432K_XPTwo 12-bit SAR ADCs
ADCADC1_CH532K_XNTwo 12-bit SAR ADCs
ADCADC1_CH6VDET_1Two 12-bit SAR ADCs
ADCADC1_CH7VDET_2Two 12-bit SAR ADCs
ADCADC2_CH0GPIO4Two 12-bit SAR ADCs
ADCADC2_CH1GPIO0Two 12-bit SAR ADCs
ADCADC2_CH2GPIO2Two 12-bit SAR ADCs
ADCADC2_CH3MTDOTwo 12-bit SAR ADCs
ADCADC2_CH4MTCKTwo 12-bit SAR ADCs
ADCADC2_CH5MTDITwo 12-bit SAR ADCs
ADCADC2_CH6MTMSTwo 12-bit SAR ADCs
ADCADC2_CH7GPIO27Two 12-bit SAR ADCs
ADCADC2_CH8GPIO25Two 12-bit SAR ADCs
ADCADC2_CH9GPIO26Two 12-bit SAR ADCs
DACDAC_1GPIO25Two 8-bit DACs
DACDAC_2GPIO26Two 8-bit DACs
DACTOUCH0GPIO4Two 8-bit DACs
DACTOUCH1GPIO0Two 8-bit DACs
DACTOUCH2GPIO2Two 8-bit DACs
DACTOUCH3MTDOTwo 8-bit DACs
Touch SensorTOUCH4MTCKCapacitive
DACTOUCH5MTDITwo 8-bit DACs
DACTOUCH6MTMSTwo 8-bit DACs
DACTOUCH7GPIO27Two 8-bit DACs
DACTOUCH832K_XNTwo 8-bit DACs
DACTOUCH932K_XPTwo 8-bit DACs
JTAGMTDIMTDIJTAG for software debugging
JTAGMTCKMTCKJTAG for software debugging
JTAGMTMSMTMSJTAG for software debugging
JTAGMTDOMTDOJTAG for software debugging
InterfaceSignalPinFunction
SD/SDIO/MMC Host ControllerHS2_CLKMTMSSupports SD memory card V3.01 standard
SD/SDIO/MMC Host ControllerHS2_CMDMTDOSupports SD memory card V3.01 standard
SD/SDIO/MMC Host ControllerHS2_DATA0GPIO2Supports SD memory card V3.01 standard
SD/SDIO/MMC Host ControllerHS2_DATA1GPIO4Supports SD memory card V3.01 standard
SD/SDIO/MMC Host ControllerHS2_DATA2MTDISupports SD memory card V3.01 standard
SD/SDIO/MMC Host ControllerHS2_DATA3MTCKSupports SD memory card V3.01 standard
Motor PWMPWM0_OUT0 ~ 2Any GPIO PinsThree channels of 16-bit timers generate PWM waveforms. Each channel has a pair of output signals, three fault detection signals, three event-capture signals, and three sync signals.
Motor PWMPWM1_OUT_IN0 ~ 2Any GPIO PinsThree channels of 16-bit timers generate PWM waveforms. Each channel has a pair of output signals, three fault detection signals, three event-capture signals, and three sync signals.
Motor PWMPWM0_FLT_IN0 ~ 2Any GPIO PinsThree channels of 16-bit timers generate PWM waveforms. Each channel has a pair of output signals, three fault detection signals, three event-capture signals, and three sync signals.
Motor PWMPWM1_FLT_IN0 ~ 2Any GPIO PinsThree channels of 16-bit timers generate PWM waveforms. Each channel has a pair of output signals, three fault detection signals, three event-capture signals, and three sync signals.
Motor PWMPWM0_CAP_IN0 ~ 2Any GPIO PinsThree channels of 16-bit timers generate PWM waveforms. Each channel has a pair of output signals, three fault detection signals, three event-capture signals, and three sync signals.
Motor PWMPWM1_CAP_IN0 ~ 2Any GPIO PinsThree channels of 16-bit timers generate PWM waveforms. Each channel has a pair of output signals, three fault detection signals, three event-capture signals, and three sync signals.
Motor PWMPWM0_SYNC_IN0 ~ 2Any GPIO PinsThree channels of 16-bit timers generate PWM waveforms. Each channel has a pair of output signals, three fault detection signals, three event-capture signals, and three sync signals.
Motor PWMPWM1_SYNC_IN0 ~ 2Any GPIO PinsThree channels of 16-bit timers generate PWM waveforms. Each channel has a pair of output signals, three fault detection signals, three event-capture signals, and three sync signals.
SDIO/SPI Slave ControllerSD_CLKMTMS MTDOSDIO interface that conforms to the industry standard SDIO 2.0 card specification
SDIO/SPI Slave ControllerSD_CMDSDIO interface that conforms to the industry standard SDIO 2.0 card specification
SDIO/SPI Slave ControllerSD_DATA0GPIO2SDIO interface that conforms to the industry standard SDIO 2.0 card specification
SDIO/SPI Slave ControllerSD_DATA1GPIO4SDIO interface that conforms to the industry standard SDIO 2.0 card specification
SDIO/SPI Slave ControllerSD_DATA2MTDISDIO interface that conforms to the industry standard SDIO 2.0 card specification
SDIO/SPI Slave ControllerSD_DATA3MTCKSDIO interface that conforms to the industry standard SDIO 2.0 card specification
UARTU0RXD_inAny GPIO PinsThree UART devices with hardware flow-control and DMA
UARTU0CTS_inAny GPIO PinsThree UART devices with hardware flow-control and DMA
UARTU0DSR_inAny GPIO PinsThree UART devices with hardware flow-control and DMA
UARTU0TXD_outAny GPIO PinsThree UART devices with hardware flow-control and DMA
UARTU0RTS_outAny GPIO PinsThree UART devices with hardware flow-control and DMA
UARTU0DTR_outAny GPIO PinsThree UART devices with hardware flow-control and DMA
UARTU1RXD_inAny GPIO PinsThree UART devices with hardware flow-control and DMA
UARTU1CTS_inAny GPIO PinsThree UART devices with hardware flow-control and DMA
UARTU1RTS_outAny GPIO PinsThree UART devices with hardware flow-control and DMA
UARTU2RXD_inAny GPIO PinsThree UART devices with hardware flow-control and DMA
UARTU2CTS_inAny GPIO PinsThree UART devices with hardware flow-control and DMA
UARTU2TXD_outAny GPIO PinsThree UART devices with hardware flow-control and DMA
UARTU2RTS_outAny GPIO PinsThree UART devices with hardware flow-control and DMA
I2CI2CEXT0_SCL_inAny GPIO PinsTwo I2C devices in slave or master mode
I2CI2CEXT0_SDA_inAny GPIO PinsTwo I2C devices in slave or master mode
I2CI2CEXT1_SCL_inAny GPIO PinsTwo I2C devices in slave or master mode
I2CI2CEXT1_SDA_inAny GPIO PinsTwo I2C devices in slave or master mode
I2CI2CEXT0_SCL_outAny GPIO PinsTwo I2C devices in slave or master mode
I2CI2CEXT0_SDA_outAny GPIO PinsTwo I2C devices in slave or master mode
I2CI2CEXT1_SDA_outAny GPIO PinsTwo I2C devices in slave or master mode

Table 4-6. Peripheral Pin Configurations

InterfaceSignalPinFunction
LED PWMledc_hs_sig_out0 ~ 7Any GPIO16 independent channels @80 MHz clock/RTC CLK. Duty accuracy: 16 bits.
I2Sledc_ls_sig_out0 ~ 7
I2S0I_DATA_in0 ~ 15
I2S0O_BCK_in
I2S0O_WS_in
I2S0I_BCK_in
I2S0I_WS_in
I2S0I_H_SYNC
I2S0I_V_SYNC
I2S0I_H_ENABLE
I2S0O_BCK_out
I2S0O_WS_outStereo input and output from/to the audio
I2S0I_BCK_outcodec; parallel LCD data output; parallel
I2S0I_WS_outcamera data input.
I2S0O_DATA_out0 ~ 23
I2S1I_DATA_in0 ~ 15
Any GPIO
I2S1O_BCK_inNote: I2S0_CLK and I2S1_CLK can only
I2S1O_WS_inbe mapped to GPIO0, U0RXD (GPIO3),
I2S1I_BCK_inU0TXD (GPIO1) via IO MUX by selecting
I2S1I_WS_inGPIO functions CLK_OUT1, CLK_OUT2,
I2S1I_H_SYNCand CLK_OUT3. For more information,
I2S1I_V_SYNCsee ESP32 Technical Reference Manual
I2S1I_H_ENABLEChapter IO_MUX and GPIO Matrix > Table
I2S1O_BCK_out
I2S1O_WS_out
I2S1I_BCK_out
I2S1I_WS_out
I2S1O_DATA_out0 ~ 23
IO MUX Pad Summary .
I2S0_CLKGPIO0, U0RXD,
I2S1_CLKor U0TXD
RMTRMT_SIG_IN0 ~ 7Any GPIO PinsEight channels for an IR transmitter and receiver of various waveforms Standard SPI consists of clock,
RMTRMT_SIG_OUT0 ~ 7Any GPIO PinsEight channels for an IR transmitter and receiver of various waveforms Standard SPI consists of clock,
RMTHSPIQ_in/_outAny GPIO Pinscan be connected to LCD and other external devices. They support the following features: • Both master and slave modes; • Four sub-modes of the SPI transfer format; • Configurable SPI frequency;
RMTHSPID_in/_outAny GPIO Pinscan be connected to LCD and other external devices. They support the following features: • Both master and slave modes; • Four sub-modes of the SPI transfer format; • Configurable SPI frequency;
RMTHSPICLK_in/_outAny GPIO Pinscan be connected to LCD and other external devices. They support the following features: • Both master and slave modes; • Four sub-modes of the SPI transfer format; • Configurable SPI frequency;
RMTHSPI_CS0_in/_outAny GPIO Pinscan be connected to LCD and other external devices. They support the following features: • Both master and slave modes; • Four sub-modes of the SPI transfer format; • Configurable SPI frequency;
RMTHSPI_CS1_outAny GPIO Pinscan be connected to LCD and other external devices. They support the following features: • Both master and slave modes; • Four sub-modes of the SPI transfer format; • Configurable SPI frequency;
General PurposeHSPI_CS2_outAny GPIO Pinscan be connected to LCD and other external devices. They support the following features: • Both master and slave modes; • Four sub-modes of the SPI transfer format; • Configurable SPI frequency;
SPIVSPIQ_in/_outAny GPIO Pinscan be connected to LCD and other external devices. They support the following features: • Both master and slave modes; • Four sub-modes of the SPI transfer format; • Configurable SPI frequency;
RMTVSPID_in/_outAny GPIO Pinscan be connected to LCD and other external devices. They support the following features: • Both master and slave modes; • Four sub-modes of the SPI transfer format; • Configurable SPI frequency;
RMTVSPICLK_in/_outAny GPIO Pinscan be connected to LCD and other external devices. They support the following features: • Both master and slave modes; • Four sub-modes of the SPI transfer format; • Configurable SPI frequency;
RMTVSPI_CS0_in/_outAny GPIO PinsUp to 64 bytes of FIFO and DMA.
RMTVSPI_CS1_outAny GPIO Pins•
InterfaceSignalPinFunction
Parallel QSPISPIHDSD_DATA_2Supports Standard SPI, Dual SPI, and Quad SPI that can be connected to the
Parallel QSPISPIWPSD_DATA_3Supports Standard SPI, Dual SPI, and Quad SPI that can be connected to the
Parallel QSPISPICS0SD_CMDSupports Standard SPI, Dual SPI, and Quad SPI that can be connected to the
Parallel QSPISPICLKSD_CLKSupports Standard SPI, Dual SPI, and Quad SPI that can be connected to the
Parallel QSPISPIQSD_DATA_0Supports Standard SPI, Dual SPI, and Quad SPI that can be connected to the
Parallel QSPISPIDSD_DATA_1Supports Standard SPI, Dual SPI, and Quad SPI that can be connected to the
Parallel QSPIHSPICLKMTMSSupports Standard SPI, Dual SPI, and Quad SPI that can be connected to the
Parallel QSPIHSPICS0MTDOSupports Standard SPI, Dual SPI, and Quad SPI that can be connected to the
Parallel QSPIHSPIQMTDISupports Standard SPI, Dual SPI, and Quad SPI that can be connected to the
Parallel QSPIHSPIDMTCKexternal flash and SRAM
Parallel QSPIHSPIHDGPIO4Supports Standard SPI, Dual SPI, and Quad SPI that can be connected to the
Parallel QSPIHSPIWPGPIO2Supports Standard SPI, Dual SPI, and Quad SPI that can be connected to the
Parallel QSPIVSPICLKGPIO18Supports Standard SPI, Dual SPI, and Quad SPI that can be connected to the
Parallel QSPIVSPICS0GPIO5Supports Standard SPI, Dual SPI, and Quad SPI that can be connected to the
Parallel QSPIVSPIQGPIO19Supports Standard SPI, Dual SPI, and Quad SPI that can be connected to the
Parallel QSPIVSPIDGPIO23Supports Standard SPI, Dual SPI, and Quad SPI that can be connected to the
Parallel QSPIVSPIHDGPIO21Supports Standard SPI, Dual SPI, and Quad SPI that can be connected to the
Parallel QSPIVSPIWPGPIO22Supports Standard SPI, Dual SPI, and Quad SPI that can be connected to the
EMAC_TX_CLKGPIO0Ethernet MAC with MII/RMII interface
EMAC_RX_CLKGPIO5
EMAC_TX_ENGPIO21
EMAC_TXD0GPIO19
EMAC_TXD1GPIO22
EMAC_TXD2MTMS
EMAC_TXD3MTDI
EMAC_RX_ERMTCK
EMAC_RX_DVGPIO27
EMAC_RXD0GPIO25
EMACEMAC_RXD1GPIO26
EMAC_RXD2U0TXD
EMAC_RXD3MTDO
EMAC_CLK_OUTGPIO16
EMAC_CLK_OUT_180GPIO17
EMAC_TX_ERGPIO4
EMAC_MDC_outAny GPIO Pins
EMAC_MDI_inAny GPIO Pins
EMAC_MDO_outAny GPIO Pins
EMAC_CRS_outAny GPIO Pins
EMAC_COL_outAny GPIO Pins
InterfaceSignalPinFunction
Pulse Counterpcnt_sig_ch0_in0
pcnt_sig_ch1_in0
pcnt_ctrl_ch0_in0
pcnt_ctrl_ch1_in0
pcnt_sig_ch0_in1
pcnt_sig_ch1_in1
pcnt_ctrl_ch0_in1
pcnt_ctrl_ch1_in1
pcnt_sig_ch0_in2
pcnt_sig_ch1_in2
pcnt_ctrl_ch0_in2
pcnt_ctrl_ch1_in2
pcnt_sig_ch0_in3
pcnt_sig_ch1_in3
pcnt_ctrl_ch0_in3
pcnt_ctrl_ch1_in3
pcnt_sig_ch0_in4
pcnt_sig_ch1_in4
pcnt_ctrl_ch0_in4
pcnt_ctrl_ch1_in4
pcnt_sig_ch0_in5
pcnt_sig_ch1_in5
pcnt_ctrl_ch0_in5
pcnt_ctrl_ch1_in5
pcnt_sig_ch0_in6
pcnt_sig_ch1_in6
pcnt_ctrl_ch0_in6
pcnt_ctrl_ch1_in6
pcnt_sig_ch0_in7
pcnt_sig_ch1_in7
pcnt_ctrl_ch0_in7
pcnt_ctrl_ch1_in7
Any GPIO PinsOperating in seven different modes, the pulse counter captures pulse and counts pulse edges.
TWAItwai_rxAny GPIO PinsCompatible with ISO 11898-1 protocol (CAN Specification 2.0)
TWAItwai_txAny GPIO PinsCompatible with ISO 11898-1 protocol (CAN Specification 2.0)
TWAItwai_bus_off_onAny GPIO PinsCompatible with ISO 11898-1 protocol (CAN Specification 2.0)
TWAItwai_clkoutAny GPIO PinsCompatible with ISO 11898-1 protocol (CAN Specification 2.0)

ESP32-D0WD-V3 Electrical Characteristics

Table 5-3. DC Characteristics (3.3 V, 25 °C)

ParameterDescriptionDescriptionMinTypMaxUnit
C INPin capacitancePin capacitance-2-pF
V IHHigh-level input voltageHigh-level input voltage0.75 × VDD 1-VDD 1 + 0.3V
V ILLow-level input voltageLow-level input voltage- 0.3-0.25 × VDD 1V
I IHHigh-level input currentHigh-level input current--50nA
I ILLow-level input currentLow-level input current--50nA
V OHHigh-level output voltageHigh-level output voltage0.8 × VDD 1--V
V OLLow-level output voltageLow-level output voltage--0.1 × VDD 1V
I OHHigh-level source current (VDD 1 = 3.3 V, V OH >= 2.64 V,VDD3P3_CPU power domain 1 , 2-40-mA
I OHHigh-level source current (VDD 1 = 3.3 V, V OH >= 2.64 V,VDD3P3_RTC power domain 1 , 2-40-mA
I OHHigh-level source current (VDD 1 = 3.3 V, V OH >= 2.64 V,VDD_SDIO power domain 1 , 3-20-mA
I OLLow-level sink current (VDD 1 = 3.3 V, V OL = 0.495 V, output drive strength set to the maximum)Low-level sink current (VDD 1 = 3.3 V, V OL = 0.495 V, output drive strength set to the maximum)-28-mA
R PUResistance of internal pull-up resistorResistance of internal pull-up resistor-45-k Ω
R PDResistance of internal pull-down resistorResistance of internal pull-down resistor-45-k Ω
V IH _ nRSTChip reset release voltage (CHIP_PU voltage is within the specified range)Chip reset release voltage (CHIP_PU voltage is within the specified range)0.75 × VDD 1-VDD 1 + 0.3V
V IL _ nRSTLow-level input voltage of CHIP_PU to shut down the chipLow-level input voltage of CHIP_PU to shut down the chip--0.6V
  1. For VDD3P3_CPU and VDD3P3_RTC power domain, per-pin current sourced in the same domain is gradually reduced from around 40 mA to around 29 mA, V OH >=2.64 V, as the number of current-source pins increases.
  2. For VDD_SDIO power domain, per-pin current sourced in the same domain is gradually reduced from around 30 mA to around 10 mA, V OH >=2.64 V, as the number of current-source pins increases.

ESP32-D0WD-V3 Absolute Maximum Ratings

Stresses above those listed in T able 5-1 Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only and normal operation of the device at these or any other conditions beyond those indicated in Section 5.2 Recommended Power Supply Characteristics is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

Table 5-1. Absolute Maximum Ratings

ParameterDescriptionMinMaxUnit
VDDA, VDD3P3, VDD3P3_RTC, VDD3P3_CPU, VDD_SDIOAllowed input voltage- 0.33.6V
I output 1Cumulative IO output current-1200mA
T STOREStorage temperature- 40150°C

Variants on the same datasheet

These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.

Part NumberManufacturerPackage
ESP32Espressif SystemsESP32-WROOM-32E (18.0 x 25.5 x 3.1 mm)
ESP32-D0WDEspressif SystemsQFN 5*5
ESP32-D0WDQ6Espressif SystemsQFN 6*6
ESP32-D0WDQ6-V3Espressif SystemsQFN 6*6
ESP32-D0WDR2-V3Espressif SystemsQFN 5*5
ESP32-D2WDEspressif Systems—
ESP32-DevKitC-32EEspressif SystemsQFN 5*5
ESP32-S0WDEspressif SystemsQFN 5*5
ESP32-U4WDHEspressif Systems48-QFN

Other RF / Wireless

All RF / Wireless datasheetsAll Espressif Systems datasheets (94)

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the ESP32-D0WD-V3

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the ESP32-D0WD-V3 run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.