ESP32-DevKitC-32E
Wi-Fi and Bluetooth SoCThe ESP32-DevKitC-32E is a wi-fi and bluetooth soc from Espressif Systems. View the full ESP32-DevKitC-32E datasheet below including key specifications, pinout, electrical characteristics, absolute maximum ratings.
Official ESP32-DevKitC-32E datasheet (PDF) — the source this page was extracted from.
ESP32-DevKitC-32E Key Specifications
| Parameter | Value |
|---|---|
| Contents | Board(s) |
| Frequency | 2.4GHz |
| Packaging | Bulk |
| RoHS | Compliant |
| Standard Pack Qty | 252 |
| Type | Transceiver; 802.11 b/g/n (Wi-Fi, WiFi, WLAN), Bluetooth® Smart Ready 4.x Dual Mode (BLE) |
| Utilized IC / Part | ESP32-WROOM-32E |
ESP32-DevKitC-32E Overview
Part: ESP32-DevKitC-32E (ESP32 Series SoC) — Espressif Systems
Type: 2.4 GHz Wi-Fi + Bluetooth / Bluetooth LE SoC
Description: Dual-core Xtensa LX6 32-bit SoC at up to 240 MHz with 802.11b/g/n Wi-Fi (up to 150 Mbps), Bluetooth v4.2 BR/EDR + Bluetooth LE, 520 KB SRAM and 34 GPIOs.
Operating Conditions:
- Supply voltage: 2.3–3.6 V (VDDA, VDD3P3, VDD3P3_RTC pin supply range)
- Max CPU clock: 240 MHz
- VDD_SDIO output: 1.8 V or same as VDD3P3_RTC
Absolute Maximum Ratings:
- Max supply voltage: 3.6 V (VDDA, VDD3P3, VDD3P3_RTC, VDD3P3_CPU, VDD_SDIO; min −0.3 V)
- Max continuous current: 1200 mA (cumulative IO output current)
- Storage temperature: −40 to 150 °C
Key Specs:
- CPU: Xtensa single-/dual-core 32-bit LX6, up to 240 MHz; 539.98 CoreMark (1 core), 1079.96 CoreMark (2 cores)
- Memory: 448 KB ROM, 520 KB SRAM, 16 KB RTC SRAM
- Wi-Fi: 802.11b/g/n, 2.4 GHz, up to 150 Mbps
- Bluetooth: v4.2 BR/EDR and LE, +9 dBm transmit power, −94 dBm Bluetooth LE sensitivity
- Deep-sleep power consumption: 10 μA
- ADC: 12-bit SAR, up to 18 channels; two 8-bit DACs; 10 touch sensors
- GPIOs: 34 programmable
- Peripheral interfaces: 4 SPI, 2 I2S, 2 I2C, 3 UART, SD/eMMC/SDIO host, SDIO/SPI slave, TWAI (CAN 2.0), Ethernet MAC
Features:
- Four virtual Wi-Fi interfaces; simultaneous Station, SoftAP and promiscuous modes
- Class-1/2/3 Bluetooth transmitter without external power amplifier
- Five power modes: Active, Modem-sleep, Light-sleep, Deep-sleep, Hibernation
- Ultra-Low-Power coprocessor
- Secure boot and flash encryption
- 1024-bit OTP
- AES, SHA-2, RSA and RNG hardware acceleration
- Motor PWM, LED PWM (up to 16 channels), RMT, pulse counter
Applications:
- Smart home
- Industrial automation
- Health care
- Consumer electronics
- Smart agriculture
- POS machines
- Service robots
- Audio devices
- IoT sensor hubs and data loggers
- Video streaming cameras
- Speech and image recognition
- SDIO Wi-Fi + Bluetooth networking card
Package:
- QFN48 (6×6 mm)
- QFN48 (5×5 mm)
ESP32-DevKitC-32E Features
- Programmable data transfer length, in multiples of 1 byte
- Four-line full-duplex/half-duplex communication and three-line half-duplex communication support
- Master mode and slave mode
- Programmable CPOL and CPHA
- Programmable clock
For details, see ESP32 Technical Reference Manual > Chapter SPI Controller .
For SPI, the pins are multiplexed with GPIO6 ~ GPIO11 via the IO MUX. For HSPI, the pins are multiplexed with GPIO2, GPIO4, GPIO12 ~ GPIO15 via the IO MUX. For VSPI, the pins are multiplexed with GPIO5, GPIO18 ~ GPIO19, GPIO21 ~ GPIO23 via the IO MUX.
For more information about the pin assignment, see Section 4.10 Peripheral Pin Configurations and ESP32 Technical Reference Manual > Chapter IO_MUX and GPIO Matrix .
ESP32-DevKitC-32E Applications
With low power consumption, ESP32 is an ideal choice for IoT devices in the following areas:
- Smart Home
- Industrial Automation
- Health Care
- Consumer Electronics
- Smart Agriculture
- POS Machines
- Service Robot
- Audio Devices
- Generic Low-power IoT Sensor Hubs
- Generic Low-power IoT Data Loggers
- Cameras for Video Streaming
- Speech Recognition
- Image Recognition
- SDIO Wi-Fi + Bluetooth Networking Card
Check the link or the QR code to make sure that you use the latest version of this document:
https://www.espressif.com/documentation/esp32_datasheet_en.pdf
ESP32-DevKitC-32E Pin Configuration
Package/Variant: ESP32-DevKitC-32E (ESP32 family peripheral pin configuration table; no per-pin package numbering available in this section)
| Interface | Signal | Pin | Function |
|---|---|---|---|
| ADC | ADC1_CH0 | SENSOR_VP | Two 12-bit SAR ADCs |
| ADC | ADC1_CH1 | SENSOR_CAPP | Two 12-bit SAR ADCs |
| ADC | ADC1_CH2 | SENSOR_CAPN | Two 12-bit SAR ADCs |
| ADC | ADC1_CH3 | SENSOR_VN | Two 12-bit SAR ADCs |
| ADC | ADC1_CH4 | 32K_XP | Two 12-bit SAR ADCs |
| ADC | ADC1_CH5 | 32K_XN | Two 12-bit SAR ADCs |
| ADC | ADC1_CH6 | VDET_1 | Two 12-bit SAR ADCs |
| ADC | ADC1_CH7 | VDET_2 | Two 12-bit SAR ADCs |
| ADC | ADC2_CH0 | GPIO4 | Two 12-bit SAR ADCs |
| ADC | ADC2_CH1 | GPIO0 | Two 12-bit SAR ADCs |
| ADC | ADC2_CH2 | GPIO2 | Two 12-bit SAR ADCs |
| ADC | ADC2_CH3 | MTDO | Two 12-bit SAR ADCs |
| ADC | ADC2_CH4 | MTCK | Two 12-bit SAR ADCs |
| ADC | ADC2_CH5 | MTDI | Two 12-bit SAR ADCs |
| ADC | ADC2_CH6 | MTMS | Two 12-bit SAR ADCs |
| ADC | ADC2_CH7 | GPIO27 | Two 12-bit SAR ADCs |
| ADC | ADC2_CH8 | GPIO25 | Two 12-bit SAR ADCs |
| ADC | ADC2_CH9 | GPIO26 | Two 12-bit SAR ADCs |
| DAC | DAC_1 | GPIO25 | Two 8-bit DACs |
| DAC | DAC_2 | GPIO26 | Two 8-bit DACs |
| Touch Sensor | TOUCH0 | GPIO4 | Capacitive |
| Touch Sensor | TOUCH1 | GPIO0 | Capacitive |
| Touch Sensor | TOUCH2 | GPIO2 | Capacitive |
| Touch Sensor | TOUCH3 | MTDO | Capacitive |
| Touch Sensor | TOUCH4 | MTCK | Capacitive |
| Touch Sensor | TOUCH5 | MTDI | Capacitive |
| Touch Sensor | TOUCH6 | MTMS | Capacitive |
| Touch Sensor | TOUCH7 | GPIO27 | Capacitive |
| Touch Sensor | TOUCH8 | 32K_XN | Capacitive |
| Touch Sensor | TOUCH9 | 32K_XP | Capacitive |
| JTAG | MTDI | MTDI | JTAG for software debugging |
| JTAG | MTCK | MTCK | JTAG for software debugging |
| JTAG | MTMS | MTMS | JTAG for software debugging |
| JTAG | MTDO | MTDO | JTAG for software debugging |
| SD/SDIO/MMC Host | HS2_CLK | MTMS | Supports SD memory card V3.01 standard |
| SD/SDIO/MMC Host | HS2_CMD | MTDO | Supports SD memory card V3.01 standard |
| SD/SDIO/MMC Host | HS2_DATA0 | GPIO2 | Supports SD memory card V3.01 standard |
| SD/SDIO/MMC Host | HS2_DATA1 | GPIO4 | Supports SD memory card V3.01 standard |
| SD/SDIO/MMC Host | HS2_DATA2 | MTDI | Supports SD memory card V3.01 standard |
| SD/SDIO/MMC Host | HS2_DATA3 | MTCK | Supports SD memory card V3.01 standard |
| SDIO/SPI Slave | SD_CLK | MTMS, MTDO | SDIO 2.0 interface |
| SDIO/SPI Slave | SD_CMD | (blank in source) | SDIO 2.0 interface |
| SDIO/SPI Slave | SD_DATA0 | GPIO2 | SDIO 2.0 interface |
| SDIO/SPI Slave | SD_DATA1 | GPIO4 | SDIO 2.0 interface |
| SDIO/SPI Slave | SD_DATA2 | MTDI | SDIO 2.0 interface |
| SDIO/SPI Slave | SD_DATA3 | MTCK | SDIO 2.0 interface |
| Parallel QSPI | SPIHD | SD_DATA_2 | Standard/Dual/Quad SPI to external flash and SRAM |
| Parallel QSPI | SPIWP | SD_DATA_3 | Standard/Dual/Quad SPI to external flash and SRAM |
| Parallel QSPI | SPICS0 | SD_CMD | Standard/Dual/Quad SPI to external flash and SRAM |
| Parallel QSPI | SPICLK | SD_CLK | Standard/Dual/Quad SPI to external flash and SRAM |
| Parallel QSPI | SPIQ | SD_DATA_0 | Standard/Dual/Quad SPI to external flash and SRAM |
| Parallel QSPI | SPID | SD_DATA_1 | Standard/Dual/Quad SPI to external flash and SRAM |
| Parallel QSPI | HSPICLK | MTMS | Standard/Dual/Quad SPI to external flash and SRAM |
| Parallel QSPI | HSPICS0 | MTDO | Standard/Dual/Quad SPI to external flash and SRAM |
| Parallel QSPI | HSPIQ | MTDI | Standard/Dual/Quad SPI to external flash and SRAM |
| Parallel QSPI | HSPID | MTCK | Standard/Dual/Quad SPI to external flash and SRAM |
| Parallel QSPI | HSPIHD | GPIO4 | Standard/Dual/Quad SPI to external flash and SRAM |
| Parallel QSPI | HSPIWP | GPIO2 | Standard/Dual/Quad SPI to external flash and SRAM |
| Parallel QSPI | VSPICLK | GPIO18 | Standard/Dual/Quad SPI to external flash and SRAM |
| Parallel QSPI | VSPICS0 | GPIO5 | Standard/Dual/Quad SPI to external flash and SRAM |
| Parallel QSPI | VSPIQ | GPIO19 | Standard/Dual/Quad SPI to external flash and SRAM |
| Parallel QSPI | VSPID | GPIO23 | Standard/Dual/Quad SPI to external flash and SRAM |
| Parallel QSPI | VSPIHD | GPIO21 | Standard/Dual/Quad SPI to external flash and SRAM |
| Parallel QSPI | VSPIWP | GPIO22 | Standard/Dual/Quad SPI to external flash and SRAM |
| EMAC | EMAC_TX_CLK | GPIO0 | Ethernet MAC, MII/RMII |
| EMAC | EMAC_RX_CLK | GPIO5 | Ethernet MAC, MII/RMII |
| EMAC | EMAC_TX_EN | GPIO21 | Ethernet MAC, MII/RMII |
| EMAC | EMAC_TXD0 | GPIO19 | Ethernet MAC, MII/RMII |
| EMAC | EMAC_TXD1 | GPIO22 | Ethernet MAC, MII/RMII |
| EMAC | EMAC_TXD2 | MTMS | Ethernet MAC, MII/RMII |
| EMAC | EMAC_TXD3 | MTDI | Ethernet MAC, MII/RMII |
| EMAC | EMAC_RX_ER | MTCK | Ethernet MAC, MII/RMII |
| EMAC | EMAC_RX_DV | GPIO27 | Ethernet MAC, MII/RMII |
| EMAC | EMAC_RXD0 | GPIO25 | Ethernet MAC, MII/RMII |
| EMAC | EMAC_RXD1 | GPIO26 | Ethernet MAC, MII/RMII |
| EMAC | EMAC_RXD2 | U0TXD | Ethernet MAC, MII/RMII |
| EMAC | EMAC_RXD3 | MTDO | Ethernet MAC, MII/RMII |
| EMAC | EMAC_CLK_OUT | GPIO16 | Ethernet MAC, MII/RMII |
| EMAC | EMAC_CLK_OUT_180 | GPIO17 | Ethernet MAC, MII/RMII |
| EMAC | EMAC_TX_ER | GPIO4 | Ethernet MAC, MII/RMII |
| EMAC | EMAC_MDC_out | Any GPIO | Ethernet MAC, MII/RMII |
| EMAC | EMAC_MDI_in | Any GPIO | Ethernet MAC, MII/RMII |
| EMAC | EMAC_MDO_out | Any GPIO | Ethernet MAC, MII/RMII |
| EMAC | EMAC_CRS_out | Any GPIO | Ethernet MAC, MII/RMII |
| EMAC | EMAC_COL_out | Any GPIO | Ethernet MAC, MII/RMII |
| UART | U0RXD_in / U0CTS_in / U0DSR_in / U0TXD_out / U0RTS_out / U0DTR_out | Any GPIO | Three UART devices with hardware flow control and DMA |
| UART | U1RXD_in / U1CTS_in / U1RTS_out | Any GPIO | Three UART devices with hardware flow control and DMA |
| UART | U2RXD_in / U2CTS_in / U2TXD_out / U2RTS_out | Any GPIO | Three UART devices with hardware flow control and DMA |
| I2C | I2CEXT0_SCL_in/out, I2CEXT0_SDA_in/out, I2CEXT1_SCL_in, I2CEXT1_SDA_in/out | Any GPIO | Two I2C devices, slave or master mode |
| Motor PWM | PWM0/1 OUT, FLT_IN, CAP_IN, SYNC_IN (0–2) | Any GPIO | 16-bit PWM timers, fault, capture and sync signals |
| LED PWM | ledc_hs_sig_out0–7, ledc_ls_sig_out0–7 | Any GPIO | 16 channels, 16-bit duty accuracy |
| I2S | I2S0/I2S1 data, BCK, WS, sync and clock signals | Any GPIO (I2S0_CLK/I2S1_CLK: GPIO0, U0RXD, or U0TXD) | Stereo audio I/O, parallel LCD output, parallel camera input |
| RMT | RMT_SIG_IN0–7, RMT_SIG_OUT0–7 | Any GPIO | Eight channels for IR TX/RX and waveforms |
| SPI | HSPI and VSPI signals (Q, D, CLK, CS0–2, HD, WP) | Any GPIO | Master/slave SPI, up to 64-byte FIFO with DMA |
| Pulse Counter | pcnt_sig_ch0/1, pcnt_ctrl_ch0/1 (inputs 0–7) | Any GPIO | Pulse edge counting in seven modes |
| TWAI | twai_rx, twai_tx, twai_bus_off_on, twai_clkout | Any GPIO | ISO 11898-1 (CAN 2.0) compatible |
Notes:
- Pin numbers (1, 2, 3, ...) could not be determined from the provided source material: no package pin diagram was attached and this section lists pins only by GPIO/function name. Pin Number is therefore given as the physical signal/pad name where available; the datasheet's physical package pin numbering must be obtained from the pin diagram section.
- This table is the generic ESP32 family peripheral configuration; the source does not isolate a table specific to ESP32-DevKitC-32E. Development board pin mapping may differ and should be confirmed against the DevKitC-32E board schematic.
- SD_CMD has no pin assignment listed in the source (blank cell).
- Some entries in the source are merged across multiple signals; they are shown grouped above.
- SD_CLK pin assignment in the source reads 'MTMS MTDO' (ambiguous); shown as-is.
ESP32-DevKitC-32E Electrical Characteristics
Table 5-3. DC Characteristics (3.3 V, 25 °C)
| Parameter | Description | Description | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| C IN | Pin capacitance | Pin capacitance | - | 2 | - | pF |
| V IH | High-level input voltage | High-level input voltage | 0.75 × VDD 1 | - | VDD 1 + 0.3 | V |
| V IL | Low-level input voltage | Low-level input voltage | - 0.3 | - | 0.25 × VDD 1 | V |
| I IH | High-level input current | High-level input current | - | - | 50 | nA |
| I IL | Low-level input current | Low-level input current | - | - | 50 | nA |
| V OH | High-level output voltage | High-level output voltage | 0.8 × VDD 1 | - | - | V |
| V OL | Low-level output voltage | Low-level output voltage | - | - | 0.1 × VDD 1 | V |
| I OH | High-level source current (VDD 1 = 3.3 V, V OH >= 2.64 V, | VDD3P3_CPU power domain 1 , 2 | - | 40 | - | mA |
| I OH | High-level source current (VDD 1 = 3.3 V, V OH >= 2.64 V, | VDD3P3_RTC power domain 1 , 2 | - | 40 | - | mA |
| I OH | High-level source current (VDD 1 = 3.3 V, V OH >= 2.64 V, | VDD_SDIO power domain 1 , 3 | - | 20 | - | mA |
| I OL | Low-level sink current (VDD 1 = 3.3 V, V OL = 0.495 V, output drive strength set to the maximum) | Low-level sink current (VDD 1 = 3.3 V, V OL = 0.495 V, output drive strength set to the maximum) | - | 28 | - | mA |
| R PU | Resistance of internal pull-up resistor | Resistance of internal pull-up resistor | - | 45 | - | k Ω |
| R PD | Resistance of internal pull-down resistor | Resistance of internal pull-down resistor | - | 45 | - | k Ω |
| V IH _ nRST | Chip reset release voltage (CHIP_PU voltage is within the specified range) | Chip reset release voltage (CHIP_PU voltage is within the specified range) | 0.75 × VDD 1 | - | VDD 1 + 0.3 | V |
| V IL _ nRST | Low-level input voltage of CHIP_PU to shut down the chip | Low-level input voltage of CHIP_PU to shut down the chip | - | - | 0.6 | V |
- For VDD3P3_CPU and VDD3P3_RTC power domain, per-pin current sourced in the same domain is gradually reduced from around 40 mA to around 29 mA, V OH >=2.64 V, as the number of current-source pins increases.
- For VDD_SDIO power domain, per-pin current sourced in the same domain is gradually reduced from around 30 mA to around 10 mA, V OH >=2.64 V, as the number of current-source pins increases.
ESP32-DevKitC-32E Absolute Maximum Ratings
Stresses above those listed in T able 5-1 Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only and normal operation of the device at these or any other conditions beyond those indicated in Section 5.2 Recommended Power Supply Characteristics is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
Table 5-1. Absolute Maximum Ratings
| Parameter | Description | Min | Max | Unit |
|---|---|---|---|---|
| VDDA, VDD3P3, VDD3P3_RTC, VDD3P3_CPU, VDD_SDIO | Allowed input voltage | - 0.3 | 3.6 | V |
| I output 1 | Cumulative IO output current | - | 1200 | mA |
| T STORE | Storage temperature | - 40 | 150 | °C |
ESP32-DevKitC-32E Ordering Information
| Part Number | Core | Chip Revision | In-Package Flash/PSRAM | Package | VDD_SDIO Voltage | Status |
|---|---|---|---|---|---|---|
| ESP32-D0WD-V3 | Dual core | v3.0/v3.1 | - | QFN 5*5 | 1.8 V/3.3 V | Active |
| ESP32-D0WDR2-V3 | Dual core | v3.0/v3.1 | 2 MB PSRAM | QFN 5*5 | 3.3 V | EOL, upgraded to ESP32-D0WDRH2-V3 |
| ESP32-U4WDH | Dual core | v3.0/v3.1 | 4 MB flash | QFN 5*5 | 3.3 V | Active |
| ESP32-D0WDQ6-V3 | Dual core | v3.0/v3.1 | - | QFN 6*6 | 1.8 V/3.3 V | NRND |
| ESP32-D0WD | Dual core | v1.0/v1.1 | - | QFN 5*5 | 1.8 V/3.3 V | NRND |
| ESP32-D0WDQ6 | Dual core | v1.0/v1.1 | - | QFN 6*6 | 1.8 V/3.3 V | NRND |
| ESP32-S0WD | Single core | v1.0/v1.1 | - | QFN 5*5 | 1.8 V/3.3 V | NRND |
Note: The requested part ESP32-DevKitC-32E does not appear in this datasheet section. The table above lists the ESP32 series chip variants covered by this datasheet.
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| ESP32 | Espressif Systems | ESP32-WROOM-32E (18.0 x 25.5 x 3.1 mm) |
| ESP32-D0WD | Espressif Systems | QFN 5*5 |
| ESP32-D0WD-V3 | Espressif Systems | 48-VFQFN Exposed Pad |
| ESP32-D0WDQ6 | Espressif Systems | QFN 6*6 |
| ESP32-D0WDQ6-V3 | Espressif Systems | QFN 6*6 |
| ESP32-D0WDR2-V3 | Espressif Systems | QFN 5*5 |
| ESP32-D2WD | Espressif Systems | — |
| ESP32-S0WD | Espressif Systems | QFN 5*5 |
| ESP32-U4WDH | Espressif Systems | 48-QFN |
More datasheets
Ask your AI agent about the ESP32-DevKitC-32E
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the ESP32-DevKitC-32E run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.