Electronic Component Datasheets
2,728 components with extracted datasheet data
M24512-DFMC6TG
STMicroelectronics
EEPROM 512kB I2C EEProm 1 MHz 1.7 5.5V
M24512-DFXXX
STMicroelectronics
512-Kbit I2C-compatible EEPROM (electrically erasable programmable memory) organized as 64 K × 8 bits.
M24512-DR
STMicroelectronics
512-Kbit (64K x 8) I2C-compatible serial EEPROM with 1 MHz clock support, 128-byte pages, and an additional lockable identification page for the -D variants.
M24512-R
STMicroelectronics
512-Kbit (64K x 8) I2C-compatible serial EEPROM supporting up to 1 MHz bus operation, 128-byte page write, and whole-array hardware write protect; the -R variant operates from 1.8 V to 5.5 V.
M24512-RXXX
STMicroelectronics
512-Kbit (64K x 8) I2C-compatible serial EEPROM with 1 MHz bus support, 128-byte page write, and whole-array hardware write protect; the -R variant operates from 1.8 V to 5.5 V.
M24512-W
STMicroelectronics
512-Kbit (64K x 8) I2C-compatible serial EEPROM with 1 MHz clock, 2.5 V to 5.5 V supply for the -W variant, 128-byte page write and write-protect of the whole array
M24C02-DRMF3TG
M24C02-DRMF3TG/K
STMicroelectronics
IC EEPROM 2KBIT I2C 1MHZ 8MLP
M24C32-DF
STMicroelectronics
M24C32-F
STMicroelectronics
M24C32-R
STMicroelectronics
M24C32-W
STMicroelectronics
M24C32-X
STMicroelectronics
M24C64-RMN6TP
STMicroelectronics
64-Kbit serial I²C bus Electrically Erasable PROgrammable Memory (EEPROM) with 32-byte page size and write protect capability.
M41T62Q6F
STMicroelectronics
Low-power serial real-time clock (RTC) with alarm functions, 32 KHz square wave output, and I2C interface.
MA730
Monolithic Power Systems
14-bit high-resolution magnetic angular position sensor with SPI, SSI, ABZ, and PWM outputs, optimized for encoder applications.
MAX-M10M-00B
u-blox
GNSS LCC RX MOD, ROM, CRYSTAL
MAX-M10S-00B
u-blox
GNSS LCC RX, ROM, TCXO, LNA, SAW
MAX11156
Analog Devices
The MAX11156 is an 18-bit, 500ksps SAR ADC with a true ±5V bipolar input range, internal reference, and SPI-compatible serial interface, offered in a 3mm x 3mm TDFN package
MAX13442E
Analog Devices
Fault-protected RS-485/RS-422 transceiver with ±80V bus fault protection, ±15kV ESD, reduced slew-rate driver for error-free transmission up to 250kbps, and hot-swap capability.
MAX13443E
Analog Devices
±15kV ESD-protected, ±60V fault-protected, fail-safe RS-485 transceiver with 10Mbps data rate and 1/4-unit-load receiver.
MAX13443EASA
Analog Devices
High-speed (10Mbps) fault-protected RS-485/RS-422 transceiver with ±60V bus fault protection, ±15kV ESD, hot-swap, and true fail-safe receiver inputs, specified over the automotive temperature range.
MAX13443EASA+T
Analog Devices
IC TRANSCEIVER HALF 1/1 8SOIC
MAX13444E
Analog Devices
Fault-protected RS-485 and J1708 transceiver with ±80V bus fault protection, ±15kV ESD, slew-rate-limited driver for error-free transmission up to 250kbps, and support for up to 128 transceivers on a bus.
MAX1344X
Analog Devices
Fault-protected RS-485 and J1708 transceiver family with +/-80V (+/-60V for MAX13443E) bus fault protection, +/-15kV ESD, hot-swap, and 5V supply. The requested MAX1344X is an umbrella designator covering the MAX13442E/43E/44E variants.
MAX13487EESA+T
Analog Devices
+5V, half-duplex, ±15kV ESD-protected RS-485/RS-422 transceiver with AutoDirection control, hot-swap capability, and slew-rate limited drivers for error-free transmission up to 500kbps.
MAX14483EVKIT
Analog Devices
Evaluation kit for the MAX14483 6-channel, 3.75kV RMS SPI digital isolator, with SMA connectors, test points and status LEDs for all six channels.
MAX1541
Analog Devices
Buck Converter Yes 170kHz~620kHz Transistor Driver 2A 5.5V 700mV 28V 2V TQFN-40 SMD
MAX1556ETB+T
Analog Devices
Low-operating-current (16μA), fixed-frequency (1MHz) synchronous step-down DC-DC converter with up to 1.2A output, ideal for powering portable devices.
MAX16977RATE+
Analog Devices
IC REG BUCK ADJ/1V 2A 16TQFN