M24C02-DRMF3TG
The M24C02-DRMF3TG is an electronic component. View the full M24C02-DRMF3TG datasheet below including key specifications.
Official M24C02-DRMF3TG datasheet (PDF) — the source this page was extracted from.
M24C02-DRMF3TG Key Specifications
| Parameter | Value |
|---|---|
| Memory size | 2 Kbits (256 bytes) |
| Page size | 16 bytes |
| Byte write time | 4 ms |
| Page write time | 4 ms |
| Write cycle endurance (at 25 °C) | 4 million cycles |
| Write cycle endurance (at 125 °C) | 600 k cycles |
| Data retention (at 25 °C) | 100 years |
| Data retention (at 125 °C) | 50 years |
| ESD Protection (human body model) | 4000 V |
M24C02-DRMF3TG Overview
Part: M24C02-A125 — STMicroelectronics
Type: Automotive 2-Kbit Serial I²C Bus EEPROM
Description: A 2-Kbit (256 bytes) serial EEPROM with an I²C compatible interface, operating up to 1 MHz, qualified for automotive applications (AEC-Q100 grade 1) over a -40 °C to 125 °C temperature range and 1.7 V to 5.5 V supply.
Operating Conditions:
- Supply voltage: 1.7 V to 5.5 V
- Operating temperature: -40 °C to 125 °C
- I²C clock frequency: 100 kHz, 400 kHz, 1 MHz
Absolute Maximum Ratings:
Key Specs:
- Memory size: 2 Kbits (256 bytes)
- Page size: 16 bytes
- Byte write time: 4 ms
- Page write time: 4 ms
- Write cycle endurance (at 25 °C): 4 million cycles
- Write cycle endurance (at 125 °C): 600 k cycles
- Data retention (at 25 °C): 100 years
- Data retention (at 125 °C): 50 years
- ESD Protection (human body model): 4000 V
Features:
- AEC-Q100 qualified
- Compatible with all I²C bus modes (1 MHz, 400 kHz, 100 kHz)
- Additional write lockable identification page
- Schmitt trigger inputs for noise filtering
- RoHS compliant and halogen-free (ECOPACK2)
Applications:
- Automotive systems
Package:
- TSSOP8 (DW) 169 mil width
- SO8N (MN) 150 mil width
- WFDFPN8 (MF) DFN8 - 2 x 3 mm
M24C02-DRMF3TG Features
- AEC-Q100 qualified
- Compatible with all I 2 C bus modes
- -1 MHz
- -400 kHz
- -100 kHz
- Memory array
- -2 Kbits (256 bytes) of EEPROM
- -Page size: 16 bytes
- -Additional write lockable page (identification page)
- Extended temperature and voltage ranges
- --40 °C to 125 °C; 1.7 V to 5.5 V
- Schmitt trigger inputs for noise filtering
- Short write cycle time
- -Byte write within 4 ms
- -Page write within 4 ms
- Write cycle endurance
- -4 million write cycles at 25 °C
- -1.2 million write cycles at 85 °C
- -600 k write cycles at 125 °C
- Data retention
- -50 years at 125 °C
- -100 years at 25 °C
- ESD Protection (human body model)
- -4000 V
- Packages
- -RoHS compliant and halogen-free (ECOPACK2)
M24C02-DRMF3TG Package Information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark.
More part numbers on this datasheet
Their pages show this same datasheet.
Ask your AI agent about the M24C02-DRMF3TG
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the M24C02-DRMF3TG run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.