TCAN330GDCNT
CAN TransceiverThe TCAN330GDCNT is a can transceiver from Texas Instruments. View the full TCAN330GDCNT datasheet below including key specifications, electrical characteristics, absolute maximum ratings.
TCAN330GDCNT shares its datasheet with TCAN330, whose page lists every part number it covers.
Official TCAN330GDCNT datasheet (PDF) — the source this page was extracted from.
TCAN330GDCNT Key Specifications
| Parameter | Value |
|---|---|
| Data Rate | 1Mbps |
| Mounting Type | Surface Mount |
| Number of Drivers/Receivers | 1/1 |
| Operating Temperature | -40°C ~ 125°C |
| Package / Case | 8-SOIC (0.154", 3.90mm Width) |
| Packaging | Tube |
| Protocol | CANbus |
| Standard Pack Qty | 75 |
| Supplier Device Package | 8-SOIC |
| Type | Transceiver |
| Supply Voltage | 3V ~ 3.6V |
TCAN330GDCNT Overview
Part: TCAN330D (TCAN33x family) — Texas Instruments
Type: 3.3 V CAN Transceiver (CAN FD capable)
Description: 3.3 V single-supply, ISO 11898-2 compatible CAN transceiver with data rates up to 1 Mbps (up to 5 Mbps for TCAN33xG devices), ±12 V common-mode range, ±14 V bus fault protection and total loop delay under 135 ns.
Operating Conditions:
- Supply voltage: 3–3.6 V
- Operating temperature: -40 to 125 °C (free-air)
- Common-mode range: ±12 V in normal and silent modes
- Logic output current: -2 mA (high) to 2 mA (low)
Absolute Maximum Ratings:
- Max supply voltage (VCC): 5 V
- Bus terminal voltage (CANH, CANL): -14 to 14 V
- Logic input/output voltage: -0.3 to 5 V
- Logic output current: 8 mA
- Max junction temperature: 150 °C
- Storage temperature: up to 150 °C
Key Specs:
- Supply current, dominant (TXD = 0 V, RL = 60 Ω): 55 mA max; 60 mA max at RL = 50 Ω
- Supply current, recessive: 3.5 mA max; silent mode: 2.5 mA max
- Standby current: 15 μA max (TA < 85 °C), 20 μA max over the full range
- Shutdown current: 1 μA max (TA < 85 °C), 2.5 μA max over the full range
- Differential output voltage, dominant: 1.6–3 V (50 Ω ≤ RL ≤ 65 Ω)
- Receiver input threshold (normal mode): 500–900 mV, 120 mV typical hysteresis
- Bus short-circuit dominant current: ±200 mA max
- UVLO on VCC: rising 2.2 V typ / 2.6 V max; falling 2 V typ; 200 mV hysteresis
- Thermal shutdown: 175 °C with 5 °C hysteresis
- ESD: HBM ±25 kV on CANH/CANL, IEC 61000-4-2 contact ±12 kV
Features:
- 3.3 V single supply; directly interfaces with 3.3 V CAN controllers/MCUs
- Compatible with ISO 11898-2 and with 5 V CAN transceivers on the same bus
- Operating modes: normal (all), standby with wake (TCAN334), silent (TCAN330, TCAN337), shutdown (TCAN330, TCAN334)
- Driver and receiver dominant time-out (TXD DTO, RXD DTO)
- Fault output pin (TCAN337 only)
- Undervoltage protection on VCC, thermal shutdown, current limiting on bus pins
- Bus and logic pins high impedance when unpowered; glitch-free power up/down
- Excellent EMC performance
Applications:
- 5 Mbps CAN FD networks (TCAN33xG devices)
- 1 Mbps operation in highly loaded CAN networks
- Industrial automation, control, sensors and drive systems
- Building, security and climate control automation
- Telecom base station status and control
- CANopen, DeviceNet, NMEA2000, ARINC825, ISO11783, CANaerospace
Package:
- SOIC-8 (D), 4.9 mm × 6 mm (TCAN330/G)
- SOT-23-8 (DCN), 2.9 mm × 1.6 mm (TCAN332/G, TCAN334/G, TCAN337/G)
TCAN330GDCNT Features
- 3.3V Single supply operation
- Data rates up to 5Mbps (TCAN33xG devices)
- Compatible with ISO 11898-2
- SOIC-8 and SOT-23 package options
- Operating Modes:
- -Normal mode (all devices)
- -Low power standby mode with wake (TCAN334)
- -Silent mode (TCAN330, TCAN337)
- -Shutdown mode (TCAN330, TCAN334)
- Wide common mode range of operation ±12V
- Bus pin fault protection of ±14V
- Total loop delay < 135ns
- Wide ambient operation temperature range: -40°C to 125°C
- Optimized behavior when unpowered:
- -Bus and logic pins are high impedance (no load to operating bus or application)
- -Power up / down glitch free operation
- Excellent EMC performance
- Protection features:
- -ESD Protection of bus terminals
- HBM ESD Protection exceeds ±25kV
- IEC61000-4-2 ESD Contact discharge protection exceeds ±12kV
- -Driver dominant time out (TXD DTO)
- -Receiver dominant time out (RXD DTO)
- -Fault output pin (TCAN337 only)
- -Undervoltage protection on VCC
- -Thermal shutdown protection
- -Current limiting on bus pins
TCAN330GDCNT Applications
- 5-Mbps operation in CAN with flexible data rate networks (TCAN33xG devices)
- 1-Mbps operation in highly loaded can networks
- Industrial automation, control, sensors and drive systems
- Building, security and climate control automation
- Telecom base station status and control
- CAN Bus standards such as CANopen, DeviceNet, NMEA2000, ARINC825, ISO11783, CANaerospace
TCAN330GDCNT Pin Configuration
Figure 4-1. TCAN330 D, DCN Packages, 8-Pin SOIC, SOT-23, (Top View)
Figure 4-2. TCAN332 D, DCN Packages, 8-Pin SOIC, SOT-23, (Top View)
Figure 4-3. TCAN334 D, DCN Packages, 8-Pin SOIC, SOT-23, (Top View)
Figure 4-4. TCAN337 D, DCN Packages, 8-Pin SOIC, SOT-23, (Top View)
TCAN330GDCNT Electrical Characteristics
over operating free-air temperature range, T J = -40°C to 150°C. All typical values are at 25°C and supply voltages of V CC = 3.3 V, R L = 60 Ω, (unless otherwise noted)
| PARAMETER | PARAMETER | PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT |
|---|---|---|---|---|---|---|---|
| Supply | |||||||
| I CC | Dominant | See Figure 6-1. TXD = 0V, R L = 60Ω, C L = open, S, STB and SHDN = 0V. Typical Bus Load. | 55 | mA | |||
| I CC | See Figure 6-1. TXD = 0V, R L = 50Ω, C L = open, S, STB and SHDN = 0V. High Bus Load. | 60 | mA | ||||
| I CC | Dominant with bus fault | See Figure 6-1. TXD = 0V, S, STB and SHDN = 0V, CANH = -12V, R L = open, C L = open | 180 | mA | |||
| I CC | Recessive | See Figure 6-1. TXD = V CC , R L = 50Ω, C L = open, S, STB and SHDN = 0V | 3.5 | mA | |||
| I CC | Supply Current: Silent Mode | Supply Current: Silent Mode | See Figure 6-1. TXD = V CC , R L = 50Ω, C L = open, S = V CC | 2.5 | mA | ||
| I CC | T A < 85°C, STB at V CC , RXD floating, TXD at V CC | 15 | μA | ||||
| I CC | Supply Current: | Supply Current: | STB at V CC , RXD floating, TXD at V CC | 20 | μA | ||
| I CC | Supply Current: | Supply Current: | T A < 85°C, SHDN at V CC , RXD floating, TXD at V CC | 1 | μA | ||
| I CC | SHDN = V CC , RXD floating, TXD at V CC | 2.5 | μA | ||||
| UV (VCC) | Rising under voltage detection on V CC for protected mode | Rising under voltage detection on V CC for protected mode | 2.2 | 2.6 | V | ||
| UV (VCC) | Falling under voltage detection on V CC for protected mode | Falling under voltage detection on V CC for protected mode | 1.65 | 2 | 2.5 | V | |
| V HYS(UVVCC) | Hysteresis voltage on UV (VCC) | Hysteresis voltage on UV (VCC) | 200 | mV | |||
| Driver | |||||||
| V O(D) | CANH | See Figure 6-3 and Figure 6-2, TXD = 0V, S, STB and SHDN = 0V, R L = 60Ω, C L = open | 2.45 | V CC | V | ||
| V O(D) | CANL | See Figure 6-3 and Figure 6-2, TXD = 0V, S, STB and SHDN = 0V, R L = 60Ω, C L = open | 0.5 | 1.25 | V | ||
| V O(R) | Bus output voltage (recessive) | Bus output voltage (recessive) | See Figure 6-3 and Figure 6-2, TXD = V CC , STB, SHDN = 0V, S = 0V or V CC (1) , R L = open (no load) | 1.85 | 1.85 | 1.85 | V |
TCAN330GDCNT Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted) (1) (2)
| MIN | MAX | UNIT | |
|---|---|---|---|
| Supply Voltage range, V CC | -0.3 | 5 | V |
| Voltage at any bus terminal (CANH or CANL), V (BUS) | -14 | 14 | V |
| Logic input terminal voltage range V (Logic_Input) | -0.3 | 5 | V |
| Logic output terminal voltage range, V (Logic_Output) | -0.3 | 5 | V |
| Logic output current, I O(LOGIC) | 8 | mA | |
| Operating junction temperature range, T J | -40 | 150 | °C |
| Storage temperature, T stg | 150 | °C |
TCAN330GDCNT Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)
| MIN | NOM | MAX | UNIT | ||
|---|---|---|---|---|---|
| V CC | Supply voltage | 3 | 3.6 | V | |
| I OH(LOGIC) | Logic terminal HIGH level output current | -2 | mA | ||
| I OL(LOGIC) | Logic terminal LOW level output current | 2 | mA | ||
| T A | Operational free-air temperature | -40 | 125 | °C |
TCAN330GDCNT Thermal Information
| THERMAL METRIC | TCAN33x D (SOIC) | TCAN33x DCN (SOT-23) | UNIT | |
| Junction-to-ambient thermal resistance | 114.4 | 154.4 | °C/W | |
| R θJA | ||||
| R θJC(top) | Junction-to-case (top) thermal resistance | 58.7 | 76.6 | °C/W |
| R θJB | Junction-to-board thermal resistance | 55.2 | 49.2 | °C/W |
| ψ JT | Junction-to-top characterization parameter | 11.7 | 11.9 | °C/W |
| ψ JB | Junction-to-board characterization parameter | 54.6 | 49.2 | °C/W |
| R θJC(bot) | Junction-to-case (bottom) thermal resistance | N/A | N/A | °C/W |
| P D T | Average power dissipation CC at 0 V, Input wave, C | 65 | 65 | mW |
| SD | Thermal shutdown temperature | 175 | 175 | °C |
| T HYS | Thermal shutdown hysteresis | 5 | 5 | °C |
TCAN330GDCNT Typical Application
Copyright © 2016, Texas Instruments Incorporated www.ti.com
Figure 7-1. Typical 3.3V Application
TCAN330GDCNT Package Information
| PART NUMBER | PACKAGE (1) | PACKAGE SIZE (2) |
|---|---|---|
| TCAN330/G | SOIC (8) | 4.9mm × 6mm |
| TCAN332/G TCAN334/G TCAN337/G | SOT-23 (8) | 2.9mm x 1.6mm |
- (1) For all available packages, see Section 9.
- (2) The package size (length × width) is a nominal value and includes pins, where applicable.
Copyright © 2016, Texas Instruments Incorporated
- A: Sleep Receiver and Wake Detect are device dependent options and are only available in TCAN334.
- B: Fault Logic are only available in TCAN337.
- C: Pin 5 and 8 functions are device dependent. Refer to Device Comparison Table.
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| TCAN330 | Texas Instruments | — |
| TCAN330/G | Texas Instruments | — |
| TCAN330D | Texas Instruments | 8-SOIC (0.154", 3.90mm Width) |
| TCAN330D.B | Texas Instruments | SOIC-8 |
| TCAN330DCNR | Texas Instruments | SOT-23-8 |
| TCAN330DCNR.B | Texas Instruments | SOT-23-8 |
| TCAN330DCNT | Texas Instruments | SOT-23-8 |
| TCAN330DCNT.B | Texas Instruments | SOT-23-8 |
| TCAN330DR | Texas Instruments | SOIC-8 |
| TCAN330DR.B | Texas Instruments | SOIC-8 |
| TCAN330G | Texas Instruments | — |
| TCAN330GD | Texas Instruments | SOIC-8 |
| TCAN330GD.B | Texas Instruments | SOIC-8 |
| TCAN330GDCNR | Texas Instruments | SOT-23-8 |
| TCAN330GDCNR.B | Texas Instruments | SOT-23-8 |
| TCAN330GDCNT.B | Texas Instruments | SOT-23-8 |
| TCAN330GDG4 | Texas Instruments | SOIC-8 |
| TCAN330GDG4.B | Texas Instruments | SOIC-8 |
| TCAN330GDR | Texas Instruments | SOIC-8 |
| TCAN330GDR.B | Texas Instruments | SOIC-8 |
| TCAN332 | Texas Instruments | — |
| TCAN332G | Texas Instruments | — |
| TCAN334 | Texas Instruments | — |
| TCAN334G | Texas Instruments | — |
| TCAN337 | Texas Instruments | — |
| TCAN337G | Texas Instruments | — |
Other Integrated Circuits
- STM32F103C8T6 – STMicroelectronics, Microcontroller
- STM32F405RGT6 – STMicroelectronics, ARM Cortex-M4 MCU
- SN74AVC4T245PWR – Texas Instruments, Dual-Supply Bus Transceiver Level Translator
- STM32F446RCT6 – STMicroelectronics, ARM Cortex-M4 MCU
- STM32G070RBT6 – STMicroelectronics, Arm Cortex-M0+ 32-bit MCU
- ADS131M08IPBSR – Texas Instruments, Delta-Sigma ADC
- ISO1540DR – Texas Instruments, Bidirectional I²C Isolator
- ISO7740DBQR – Texas Instruments, Digital Isolator
All Integrated Circuits datasheetsAll Texas Instruments datasheets (2,417)
Ask your AI agent about the TCAN330GDCNT
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the TCAN330GDCNT run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.