Skip to main content

TCAN330DCNT.B

CAN Transceiver

The TCAN330DCNT.B is a can transceiver from Texas Instruments. View the full TCAN330DCNT.B datasheet below including key specifications, electrical characteristics, absolute maximum ratings.

Manufacturer

Texas Instruments

Category

CAN Transceiver

Key Specifications

ParameterValue
Data Rate1Mbps
Mounting TypeSurface Mount
Number of Drivers/Receivers1/1
Operating Temperature-40°C ~ 125°C
Package / Case8-SOIC (0.154", 3.90mm Width)
PackagingTube
ProtocolCANbus
Standard Pack Qty75
Supplier Device Package8-SOIC
TypeTransceiver
Supply Voltage3V ~ 3.6V

Overview

Part: TCAN33x — Texas Instruments

Type: 3.3V CAN Transceiver with CAN FD

Description: A family of 3.3V single supply CAN transceivers compatible with ISO 11898-2, supporting data rates up to 5 Mbps (G-variants) or 1 Mbps, with integrated protection features and available in SOIC-8 and SOT-23 packages.

Operating Conditions:

  • Supply voltage: 3–3.6 V
  • Operating temperature: -40 to 125 °C
  • Common mode range: ±12 V

Absolute Maximum Ratings:

  • Max supply voltage: 5 V
  • Max voltage at any bus terminal (CANH or CANL): ±14 V
  • Max logic output current: 8 mA
  • Max junction temperature: 150 °C
  • Max storage temperature: 150 °C

Key Specs:

  • Dominant supply current (typical bus load): 55 mA (max)
  • Recessive supply current: 3.5 mA (max)
  • Shutdown supply current: 2.5 μA (max, at SHDN = VCC)
  • Differential output voltage (dominant, 50Ω ≤ RL ≤ 65Ω): 1.6 V (min) to 3 V (max)
  • Input threshold voltage (normal modes): 500 mV (min) to 900 mV (max)
  • Hysteresis voltage for input threshold: 120 mV (typ)
  • Power-off bus input leakage current (TA < 85°C): 6 μA (max)
  • Total loop delay: < 135 ns

Features:

  • 3.3V Single supply operation
  • Data rates up to 5Mbps (TCAN33xG devices)
  • Compatible with ISO 11898-2
  • Operating Modes: Normal, Low power standby with wake (TCAN334), Silent (TCAN330, TCAN337), Shutdown (TCAN330, TCAN334)
  • Bus pin fault protection of ±14V
  • ESD Protection of bus terminals: HBM ±25kV, IEC61000-4-2 Contact discharge ±12kV
  • Driver dominant time out (TXD DTO)
  • Receiver dominant time out (RXD DTO)
  • Undervoltage protection on VCC
  • Thermal shutdown protection
  • Current limiting on bus pins

Applications:

  • 5-Mbps operation in CAN with flexible data rate networks (TCAN33xG devices)
  • 1-Mbps operation in highly loaded CAN networks
  • Industrial automation, control, sensors and drive systems
  • Building, security and climate control automation
  • Telecom base station status and control
  • CAN Bus standards such as CANopen, DeviceNet, NMEA2000, ARINC825, ISO11783, CANaerospace

Package:

  • SOIC (8) - 4.9mm × 6mm
  • SOT-23 (8) - 2.9mm x 1.6mm

Features

  • 3.3V Single supply operation
  • Data rates up to 5Mbps (TCAN33xG devices)
  • Compatible with ISO 11898-2
  • SOIC-8 and SOT-23 package options
  • Operating Modes:
  • -Normal mode (all devices)
  • -Low power standby mode with wake (TCAN334)
  • -Silent mode (TCAN330, TCAN337)
  • -Shutdown mode (TCAN330, TCAN334)
  • Wide common mode range of operation ±12V
  • Bus pin fault protection of ±14V
  • Total loop delay < 135ns
  • Wide ambient operation temperature range: -40°C to 125°C
  • Optimized behavior when unpowered:
  • -Bus and logic pins are high impedance (no load to operating bus or application)
  • -Power up / down glitch free operation
  • Excellent EMC performance
  • Protection features:
  • -ESD Protection of bus terminals
  • HBM ESD Protection exceeds ±25kV
  • IEC61000-4-2 ESD Contact discharge protection exceeds ±12kV
  • -Driver dominant time out (TXD DTO)
  • -Receiver dominant time out (RXD DTO)
  • -Fault output pin (TCAN337 only)
  • -Undervoltage protection on VCC
  • -Thermal shutdown protection
  • -Current limiting on bus pins

Applications

Pin Configuration

Figure 4-1. TCAN330 D, DCN Packages, 8-Pin SOIC, SOT-23, (Top View)

Figure 4-1. TCAN330 D, DCN Packages, 8-Pin SOIC, SOT-23, (Top View)

Figure 4-2. TCAN332 D, DCN Packages, 8-Pin SOIC, SOT-23, (Top View)

Figure 4-3. TCAN334 D, DCN Packages, 8-Pin SOIC, SOT-23, (Top View)

Figure 4-4. TCAN337 D, DCN Packages, 8-Pin SOIC, SOT-23, (Top View)

Electrical Characteristics

over operating free-air temperature range, T J = -40°C to 150°C. All typical values are at 25°C and supply voltages of V CC = 3.3 V, R L = 60 Ω, (unless otherwise noted)

PARAMETERPARAMETERPARAMETERTEST CONDITIONSMINTYPMAXUNIT
Supply
I CCDominantSee Figure 6-1. TXD = 0V, R L = 60Ω, C L = open, S, STB and SHDN = 0V. Typical Bus Load.55mA
I CCSee Figure 6-1. TXD = 0V, R L = 50Ω, C L = open, S, STB and SHDN = 0V. High Bus Load.60mA
I CCDominant with bus faultSee Figure 6-1. TXD = 0V, S, STB and SHDN = 0V, CANH = -12V, R L = open, C L = open180mA
I CCRecessiveSee Figure 6-1. TXD = V CC , R L = 50Ω, C L = open, S, STB and SHDN = 0V3.5mA
I CCSupply Current: Silent ModeSupply Current: Silent ModeSee Figure 6-1. TXD = V CC , R L = 50Ω, C L = open, S = V CC2.5mA
I CCT A < 85°C, STB at V CC , RXD floating, TXD at V CC15μA
I CCSupply Current:Supply Current:STB at V CC , RXD floating, TXD at V CC20μA
I CCSupply Current:Supply Current:T A < 85°C, SHDN at V CC , RXD floating, TXD at V CC1μA
I CCSHDN = V CC , RXD floating, TXD at V CC2.5μA
UV (VCC)Rising under voltage detection on V CC for protected modeRising under voltage detection on V CC for protected mode2.22.6V
UV (VCC)Falling under voltage detection on V CC for protected modeFalling under voltage detection on V CC for protected mode1.6522.5V
V HYS(UVVCC)Hysteresis voltage on UV (VCC)Hysteresis voltage on UV (VCC)200mV
Driver
V O(D)CANHSee Figure 6-3 and Figure 6-2, TXD = 0V, S, STB and SHDN = 0V, R L = 60Ω, C L = open2.45V CCV
V O(D)CANLSee Figure 6-3 and Figure 6-2, TXD = 0V, S, STB and SHDN = 0V, R L = 60Ω, C L = open0.51.25V
V O(R)Bus output voltage (recessive)Bus output voltage (recessive)See Figure 6-3 and Figure 6-2, TXD = V CC , STB, SHDN = 0V, S = 0V or V CC (1) , R L = open (no load)1.851.851.85V

www.ti.com

Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted) (1) (2)

MINMAXUNIT
Supply Voltage range, V CC-0.35V
Voltage at any bus terminal (CANH or CANL), V (BUS)-1414V
Logic input terminal voltage range V (Logic_Input)-0.35V
Logic output terminal voltage range, V (Logic_Output)-0.35V
Logic output current, I O(LOGIC)8mA
Operating junction temperature range, T J-40150°C
Storage temperature, T stg150°C

Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted)

MINNOMMAXUNIT
V CCSupply voltage33.6V
I OH(LOGIC)Logic terminal HIGH level output current-2mA
I OL(LOGIC)Logic terminal LOW level output current2mA
T AOperational free-air temperature-40125°C

Thermal Information

THERMAL METRICTCAN33x D (SOIC)TCAN33x DCN (SOT-23)UNIT
Junction-to-ambient thermal resistance114.4154.4°C/W
R θJA
R θJC(top)Junction-to-case (top) thermal resistance58.776.6°C/W
R θJBJunction-to-board thermal resistance55.249.2°C/W
ψ JTJunction-to-top characterization parameter11.711.9°C/W
ψ JBJunction-to-board characterization parameter54.649.2°C/W
R θJC(bot)Junction-to-case (bottom) thermal resistanceN/AN/A°C/W
P D TAverage power dissipation CC at 0 V, Input wave, C6565mW
SDThermal shutdown temperature175175°C
T HYSThermal shutdown hysteresis55°C

Typical Application

Copyright © 2016, Texas Instruments Incorporated

Figure 7-1. Typical 3.3V Application

www.ti.com

Package Information

PART NUMBERPACKAGE (1)PACKAGE SIZE (2)
TCAN330/GSOIC (8)4.9mm × 6mm
TCAN332/G TCAN334/G TCAN337/GSOT-23 (8)2.9mm x 1.6mm
  • (1) For all available packages, see Section 9.
  • (2) The package size (length × width) is a nominal value and includes pins, where applicable.

Copyright © 2016, Texas Instruments Incorporated

  • A: Sleep Receiver and Wake Detect are device dependent options and are only available in TCAN334.
  • B: Fault Logic are only available in TCAN337.
  • C: Pin 5 and 8 functions are device dependent. Refer to Device Comparison Table.

Related Variants

The following components are covered by the same datasheet.

Part NumberManufacturerPackage
TCAN330Texas Instruments
TCAN330/GTexas Instruments
TCAN330DTexas Instruments8-SOIC (0.154", 3.90mm Width)
TCAN330D.BTexas Instruments
TCAN330DCNRTexas Instruments
TCAN330DCNR.BTexas Instruments
TCAN330DCNTTexas Instruments
TCAN330DRTexas Instruments
TCAN330DR.BTexas Instruments
TCAN330GTexas Instruments
TCAN330GDTexas Instruments
TCAN330GD.BTexas Instruments
TCAN330GDCNRTexas Instruments
TCAN330GDCNR.BTexas Instruments
TCAN330GDCNTTexas Instruments
TCAN330GDCNT.BTexas Instruments
TCAN330GDG4Texas Instruments
TCAN330GDG4.BTexas Instruments
TCAN330GDRTexas Instruments
TCAN330GDR.BTexas Instruments
TCAN332Texas Instruments
TCAN332GTexas Instruments
TCAN334Texas Instruments
TCAN334GTexas Instruments
TCAN337Texas Instruments
TCAN337GTexas Instruments
TCAN33XTexas Instruments
Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Get structured datasheet data via API

Get started free