PIC24FJ128GU406

Part: PIC24FJ256GU405

Type: 16-Bit Microcontroller

Description: 16-bit eXtreme Low-Power microcontroller operating up to 16 MIPS at 32 MHz with 256 KB dual-partition Flash, 32 KB RAM, segmented LCD controller, USB, and 10/12-bit ADC.

Operating Conditions:

• Supply voltage: 2.0 V to 3.6 V
• Operating temperature: -40 °C to +125 °C
• Maximum CPU speed: 16 MIPS at 32 MHz

Absolute Maximum Ratings:

• Max supply voltage: 4.0 V (Voltage on VDD with respect to VSS)
• Voltage on general purpose digital/analog pin (not 5.5 V tolerant): -0.3 V to (VDD + 0.3 V)
• Voltage on general purpose digital/analog pin (5.5 V tolerant, VDD ≥ 2.0 V): -0.3 V to +6.0 V
• Maximum current out of VSS pin: 300 mA
• Maximum current into VDD pin: 250 mA
• Maximum output current sunk by any I/O pin: 25 mA
• Maximum output current sourced by any I/O pin: 25 mA
• Maximum current sunk by all ports: 200 mA
• Maximum current sourced by all ports: 200 mA
• Max junction/storage temperature: -65 °C to +150 °C (storage temperature)

Key Specs:

• Program memory: 256 KB Flash (dual partition with ECC)
• Data memory: 32 KB RAM
• ADC: Up to 12 channels, selectable 10-bit (400 ksps) or 12-bit (350 ksps)
• Direct Memory Access (DMA): 6 channels
• Multi-Output Capture/Compare/PWM (MCCP): 7 modules
• Timers: 5 (16-bit)
• Digital communication peripherals: 4 UART, 3 I2C, 4 SPI (with I2S support), USB
• LCD Controller: Up to 15 segments x 8 commons

Features:

• Segmented LCD display controller with internal charge pump and core-independent animation
• Dual-partition Flash array supporting live updates and simultaneous execute/write
• Hardware single-cycle 17-bit x 17-bit multiplier and 32-bit by 16-bit divider
• Peripheral Pin Select (PPS) for dynamic I/O pin mapping
• Functional safety features including Fail-Safe Clock Monitor, DMT, WDT, and CRC generator
• Retention Sleep mode with on-chip ultra-low-power retention regulator
• 120-bit Unique Device Identifier (UDID)

Applications:

• Safety-critical embedded applications
• Low-power segmented LCD user interfaces
• Embedded USB applications
• Industrial control and instrumentation

Package:

• 48-Pin TQFP
• 48-Pin UQFN

• Up to 24-Channel, Software Selectable 10/12-Bit Analog-to-Digital Converter:
• -12-bit, 350K samples/second conversion rate (single Sample-and-Hold)
• -10-bit, 400K samples/second conversion rate (single Sample-and-Hold)
• -Sleep mode operation
• -Low-voltage boost for input
• -Band gap reference input feature
• -Core-independent windowed threshold compare feature
• -Auto-scan feature
• Three Analog Comparators with Input Multiplexing:
• -Programmable reference voltage for comparators
• 10-Bit, 1 Msps DAC with Buffered Output

This section provides an overview of the PIC24FJ512GU410 family electrical characteristics. Additional information will be provided in future revisions of this document as it becomes available.

Absolute maximum ratings for the PIC24FJ512GU410 family are listed below. Exposure to these maximum rating conditions for extended periods may affect device reliability. Functional operation of the device at these, or any other conditions above the parameters indicated in the operation listings of this specification, is not implied.

1. Stresses above those listed under 'Absolute Maximum Ratings' may cause permanent damage to the device. This is a stress rating only and functional operation of the device at those, or any other conditions above those indicated in the operation listings of this specification, is not implied. Exposure to maximum rating conditions for extended periods may affect device reliability.
2. Maximum allowable current is a function of device maximum power dissipation (see Table 32-1).

• Dimensioning and tolerancing per ASME Y14.5M 1.
• BSC: Basic Dimension. Theoretically exact value shown without tolerances.
• For best soldering results, thermal vias, if used, should be filled or tented to avoid solder loss during reflow process 2.

Microchip Technology Drawing C04-2442A-PTX

© 2018 Microchip Technology Inc.