LMK04828BISQX/NOPB
JESD204B Clock Jitter CleanerThe LMK04828BISQX/NOPB is a jesd204b clock jitter cleaner from Texas Instruments. View the full LMK04828BISQX/NOPB datasheet below including key specifications, electrical characteristics, absolute maximum ratings.
LMK04828BISQX/NOPB shares its datasheet with LMK04828, whose page lists every part number it covers.
Official LMK04828BISQX/NOPB datasheet (PDF) — the source this page was extracted from.
LMK04828BISQX/NOPB Key Specifications
| Parameter | Value |
|---|---|
| Digital Delay | Dynamically adjustable, 25 ps analog delay step |
| SYSREF Clocks | up to 7 |
| Output Divider | 1 to 32 (even and odd), 50% duty cycle |
| Output Formats | LVPECL, LVDS, HSDS, LCPECL |
| Supply Voltage | 3.15V to 3.45V |
| VCO0 Frequency | 2370 to 2630 MHz |
| VCO1 Frequency | 2920 to 3080 MHz |
| Package Dimensions | 9.0 x 9.0 x 0.8 mm |
| Operating Temperature | -40°C to 85°C (105°C at PCB thermal pad) |
| Redundant Input Clocks | up to 3 |
| PLL2 Phase Detector Rate | up to 155 MHz |
| Noise Floor At 245.76 MHz | -162.5 dBc/Hz |
| Max Clock Output Frequency | 3.1 GHz |
| PLL2 Normalized Noise Floor | -227 dBc/Hz |
| RMS Jitter (100 Hz To 20 MHz) | 91 fs |
| RMS Jitter (12 KHz To 20 MHz) | 88 fs |
| Differential Device Clocks From PLL2 | up to 14 |
LMK04828BISQX/NOPB Overview
Part: LMK04828 (LMK0482x family: LMK04821, LMK04826, LMK04828), Texas Instruments
Type: JESD204B Clock Jitter Cleaner with Dual-Loop PLLs
Description: Ultra low-noise JESD204B-compliant clock jitter cleaner with 88 fs RMS jitter (12 kHz to 20 MHz), up to 14 differential device clocks, a maximum output frequency of 3.1 GHz, and 3.15–3.45 V operation.
Operating Conditions:
- Supply voltage: 3.15–3.45 V (3.3 V typical)
- Operating temperature: -40 to 85 °C (ambient)
- PCB temperature (measured at thermal pad): up to 105 °C
- Junction temperature: up to 125 °C
Absolute Maximum Ratings:
- Max supply voltage (VCC): 3.6 V
- Input voltage: -0.3 V to (VCC + 0.3 V)
- Differential input current (CLKinX, OSCin, FBCLKin, Fin): ±5 mA
- Max junction temperature: 150 °C
- Storage temperature: -65 to 150 °C
- Lead temperature (solder, 4 s): 260 °C
Key Specs:
- RMS jitter: 88 fs (12 kHz to 20 MHz); 91 fs (100 Hz to 20 MHz)
- Noise floor: -162.5 dBc/Hz at 245.76 MHz
- PLL2 normalized [1 Hz] noise floor: -227 dBc/Hz
- PLL2 phase detector rate: up to 155 MHz
- Maximum clock output frequency: 3.1 GHz
- LMK04828 VCO0: 2370 to 2630 MHz; VCO1: 2920 to 3080 MHz
- Output divides: 1 to 32 (even and odd), 50% duty cycle
- Analog delay: 25 ps step
Features:
- JEDEC JESD204B support
- Up to 14 differential device clocks from PLL2, and up to 7 SYSREF clocks
- Programmable outputs: LVPECL, LVDS, HSDS, LCPECL (PLL2); LVPECL, LVDS, 2xLVCMOS (buffered VCXO output from PLL1)
- Dual-loop PLLatinum architecture
- PLL1: up to 3 redundant input clocks, automatic and manual switchover, hitless switching, LOS, holdover mode, integrated low-noise crystal oscillator circuit
- PLL2: OSCin frequency doubler, two integrated low-noise VCOs
- Precision digital delay (dynamically adjustable) and glitchless analog delay
- Multi-mode: dual PLL, single PLL, and clock distribution
Applications:
- Wireless infrastructure
- Data converter clocking
- Networking, SONET/SDH, DSLAM
- Medical / video / military / aerospace
- Test and measurement
Package:
- 64-pin QFN (9.0 mm × 9.0 mm × 0.8 mm)
LMK04828BISQX/NOPB Features
- 1 · JEDEC JESD204B Support
- Ultra-Low RMS Jitter
- -88 fs RMS Jitter (12 kHz to 20 MHz)
- -91 fs RMS Jitter (100 Hz to 20 MHz)
- --162.5 dBc/Hz Noise Floor at 245.76 MHz
- Up to 14 Differential Device Clocks from PLL2
- -Up to 7 SYSREF Clocks
- -Maximum Clock Output Frequency 3.1 GHz
- -LVPECL, LVDS, HSDS, LCPECL Programmable Outputs from PLL2
- Up to 1 Buffered VCXO/Crystal Output from PLL1 -LVPECL, LVDS, 2xLVCMOS Programmable
- Dual Loop PLLatinum™ PLL Architecture
- PLL1
- -Up to 3 Redundant Input Clocks
- -Automatic and Manual Switch-Over Modes
- -Hitless Switching and LOS
- -Integrated Low-Noise Crystal Oscillator Circuit
- -Holdover Mode When Input Clocks are Lost
LMK04828BISQX/NOPB Applications
- Wireless Infrastructure
- Data Converter Clocking
- Networking, SONET/SDH, DSLAM
- Medical / Video / Military / Aerospace
- Test and Measurement
LMK04828BISQX/NOPB Pin Configuration
LMK04828BISQX/NOPB Electrical Characteristics
(3.15 V < VCC < 3.45 V, -40 °C < TA < 85 °C and TPCB ≤ 105 °C. Typical values at VCC = 3.3 V, TA = 25 °C, at the Recommended Operating Conditions and are not assured.)
| PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT | |
|---|---|---|---|---|---|---|
| CURRENT CONSUMPTION | CURRENT CONSUMPTION | CURRENT CONSUMPTION | CURRENT CONSUMPTION | CURRENT CONSUMPTION | CURRENT CONSUMPTION | CURRENT CONSUMPTION |
| I CC_PD | Power down supply current | 1 | 3 | mA | ||
| I CC_CLKS | Supply current (1) | 14 HSDS 8-mA clocks enabled PLL1 and PLL2 locked. | 565 | 665 | mA | |
| CLKin0/0*, CLKin1/1*, and CLKin2/2* INPUT CLOCK SPECIFICATIONS | CLKin0/0*, CLKin1/1*, and CLKin2/2* INPUT CLOCK SPECIFICATIONS | CLKin0/0*, CLKin1/1*, and CLKin2/2* INPUT CLOCK SPECIFICATIONS | CLKin0/0*, CLKin1/1*, and CLKin2/2* INPUT CLOCK SPECIFICATIONS | CLKin0/0*, CLKin1/1*, and CLKin2/2* INPUT CLOCK SPECIFICATIONS | CLKin0/0*, CLKin1/1*, and CLKin2/2* INPUT CLOCK SPECIFICATIONS | CLKin0/0*, CLKin1/1*, and CLKin2/2* INPUT CLOCK SPECIFICATIONS |
| f CLKin | Clock input frequency | 0.001 | 750 | MHz | ||
| SLEW CLKin | Clock input slew rate (2) | 20% to 80% | 0.15 | 0.5 | V/ns | |
| V ID CLKin | Clock input Differential input voltage (3) Figure 8 | AC coupled | 0.125 | 1.55 | |V| | |
| V SS CLKin | Clock input Differential input voltage (3) Figure 8 | AC coupled | 0.25 | 3.1 | Vpp | |
| V CLKin | Clock input Single-ended input voltage | AC coupled to CLKinX; CLKinX* AC coupled to ground CLKinX_TYPE = 0 (bipolar) | 0.25 | 2.4 | Vpp | |
| V CLKin | Clock input Single-ended input voltage | AC coupled to CLKinX; CLKinX* AC coupled to ground CLKinX_TYPE = 1 (MOS) | 0.35 | 2.4 | Vpp | |
| |V CLKinX-offset | | DC offset voltage between CLKinX/CLKinX* (CLKinX* - CLKinX) | Each pin AC coupled, CLKin0/1/2 CLKinX_TYPE = 0 (bipolar) | 0 | |mV| | ||
| |V CLKinX-offset | | DC offset voltage between CLKinX/CLKinX* (CLKinX* - CLKinX) | Each pin AC coupled, CLKin0/1 CLKinX_TYPE = 1 (MOS) | 55 | |mV| | ||
| |V CLKinX-offset | | DC offset voltage between CLKin2/CLKin2* (CLKin2* - CLKin2) | Each pin AC coupled CLKinX_TYPE = 1 (MOS) | 20 | |mV| | ||
| V CLKin- V IH | High input voltage | DC coupled to CLKinX; CLKinX* AC coupled to ground CLKinX_TYPE = 1 (MOS) | 2.0 | V CC | V | |
| V CLKin- V IL | Low input voltage | DC coupled to CLKinX; CLKinX* AC coupled to ground CLKinX_TYPE = 1 (MOS) | 0.0 | 0.4 | V | |
| FBCLKin/FBCLKin* and Fin/Fin* INPUT SPECIFICATIONS | FBCLKin/FBCLKin* and Fin/Fin* INPUT SPECIFICATIONS | FBCLKin/FBCLKin* and Fin/Fin* INPUT SPECIFICATIONS | FBCLKin/FBCLKin* and Fin/Fin* INPUT SPECIFICATIONS | FBCLKin/FBCLKin* and Fin/Fin* INPUT SPECIFICATIONS | FBCLKin/FBCLKin* and Fin/Fin* INPUT SPECIFICATIONS | FBCLKin/FBCLKin* and Fin/Fin* INPUT SPECIFICATIONS |
| f FBCLKin | Clock input frequency for zero-delay with external feedback. | AC coupled CLKinX_TYPE = 0 (bipolar) | 0.001 | 750 | MHz | |
| f Fin | Clock input frequency for external VCO or distribution mode | AC coupled (4) CLKinX_TYPE = 0 (bipolar) | 0.001 | 3100 | MHz |
(3.15 V < VCC < 3.45 V, -40 °C < TA < 85 °C and TPCB ≤ 105 °C. Typical values at VCC = 3.3 V, TA = 25 °C, at the Recommended Operating Conditions and are not assured.)
| PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT | |
|---|---|---|---|---|---|---|
| V FBCLKin/Fin | Single ended Clock input voltage | AC coupled CLKinX_TYPE = 0 (bipolar) | 0.25 | 2.0 | Vpp | |
| SLEW FBCLKin/Fin | Slew rate on CLKin (2) | AC coupled; 20% to 80%; (CLKinX_TYPE = 0) | 0.15 | 0.5 | V/ns | |
| PLL1 SPECIFICATIONS | PLL1 SPECIFICATIONS | PLL1 SPECIFICATIONS | PLL1 SPECIFICATIONS | PLL1 SPECIFICATIONS | PLL1 SPECIFICATIONS | PLL1 SPECIFICATIONS |
| f PD1 | PLL1 phase detector frequency | V CPout1 = V CC /2, PLL1_CP_GAIN = 0 | 50 | 40 | MHz μA | |
| I CPout1 SOURCE | PLL1 charge Pump source current (5) | V CPout1 = V CC /2, PLL1_CP_GAIN = 1 V CPout1 = V CC /2, PLL1_CP_GAIN = 2 … V CPout1 = V CC /2, PLL1_CP_GAIN = 14 V CPout1 = V CC /2, PLL1_CP_GAIN = 15 | 150 250 … 1450 1550 | μA μA μA μA μA | ||
| I CPout1 SINK | V CPout1 =V CC /2, PLL1_CP_GAIN = 0 | -50 | μA | |||
| PLL1 charge | V CPout1 =V CC /2, PLL1_CP_GAIN = 1 V CPout1 =V CC /2, PLL1_CP_GAIN = 2 | -150 -250 | μA μA | |||
| Pump sink current (5) | … V CPout1 =V CC /2, PLL1_CP_GAIN = 14 V CPout1 =V CC /2, PLL1_CP_GAIN = 15 | … -1450 -1550 | μA μA μA | |||
| I CPout1 %MIS | Charge pump Sink / source mismatch | V CPout1 = V CC /2, T = 25 °C | 1% | 10% | ||
| I CPout1 V TUNE | Magnitude of charge pump current variation vs. charge pump voltage | 0.5 V < V CPout1 < V CC - 0.5 V T A = 25 °C | 4% | |||
| I CPout1 %TEMP | Charge pump current vs. temperature variation | 4% | ||||
| I CPout1 TRI | Charge pump TRI-STATE leakage current | 0.5 V < V CPout < V CC - 0.5 V | 5 | nA | ||
| PN10kHz | PLL 1/f noise at 10-kHz offset. | PLL1_CP_GAIN = 350 μA | -117 | dBc/Hz | ||
| Normalized to 1-GHz output frequency | PLL1_CP_GAIN = 1550 μA | -118 | dBc/Hz | |||
| PN1Hz | PLL1_CP_GAIN = 350 μA | -221.5 | dBc/Hz | |||
| Normalized phase noise contribution | PLL1_CP_GAIN = 1550 μA | -223 | dBc/Hz | |||
| PLL2 REFERENCE INPUT (OSCin) SPECIFICATIONS | PLL2 REFERENCE INPUT (OSCin) SPECIFICATIONS | PLL2 REFERENCE INPUT (OSCin) SPECIFICATIONS | PLL2 REFERENCE INPUT (OSCin) SPECIFICATIONS | PLL2 REFERENCE INPUT (OSCin) SPECIFICATIONS | PLL2 REFERENCE INPUT (OSCin) SPECIFICATIONS | PLL2 REFERENCE INPUT (OSCin) SPECIFICATIONS |
| f OSCin | PLL2 reference input (6) | 500 | MHz | |||
| SLEW OSCin | PLL2 reference clock minimum slew rate on OSCin (2) | 20% to 80% | 0.15 | 0.5 | V/ns | |
| V OSCin | Input voltage for OSCin or OSCin* | AC coupled; single-ended (unused pin AC coupled to GND) | 0.2 | 2.4 | Vpp | |
| V ID OSCin | Differential voltage swing | AC coupled | 0.2 | 1.55 | |V| | |
| V SS OSCin | Figure 8 | AC coupled | 0.4 | 3.1 | Vpp | |
| |V OSCin-offset | | DC offset voltage between OSCin/OSCin* (OSCinX* - OSCinX) | Each pin AC coupled | 20 | |mV| | ||
| f doubler_max | Doubler input frequency (7) | EN_PLL2_REF_2X = 1 (8) ; OSCin duty cycle 40% to 60% | 155 | MHz |
(3.15 V < VCC < 3.45 V, -40 °C < TA < 85 °C and TPCB ≤ 105 °C. Typical values at VCC = 3.3 V, TA = 25 °C, at the Recommended Operating Conditions and are not assured.)
| PARAMETER | PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT |
|---|---|---|---|---|---|---|
| CRYSTAL OSCILLATOR MODE SPECIFICATIONS | CRYSTAL OSCILLATOR MODE SPECIFICATIONS | CRYSTAL OSCILLATOR MODE SPECIFICATIONS | CRYSTAL OSCILLATOR MODE SPECIFICATIONS | CRYSTAL OSCILLATOR MODE SPECIFICATIONS | CRYSTAL OSCILLATOR MODE SPECIFICATIONS | CRYSTAL OSCILLATOR MODE SPECIFICATIONS |
| F XTAL | Crystal frequency range | Fundamental mode crystal ESR = 200 Ω (10 to 30 MHz) ESR = 125 Ω (30 to 40 MHz) | 10 | 40 | MHz | |
| C IN | Input capacitance of OSCin port | -40 to 85 °C | 1 | pF | ||
| PLL2 PHASE DETECTOR and CHARGE PUMP SPECIFICATIONS | PLL2 PHASE DETECTOR and CHARGE PUMP SPECIFICATIONS | PLL2 PHASE DETECTOR and CHARGE PUMP SPECIFICATIONS | PLL2 PHASE DETECTOR and CHARGE PUMP SPECIFICATIONS | PLL2 PHASE DETECTOR and CHARGE PUMP SPECIFICATIONS | PLL2 PHASE DETECTOR and CHARGE PUMP SPECIFICATIONS | PLL2 PHASE DETECTOR and CHARGE PUMP SPECIFICATIONS |
| f PD2 | Phase detector frequency (7) | 155 | MHz | |||
| I CPout SOURCE | PLL2 charge pump source current (5) | V CPout2 =V CC /2, PLL2_CP_GAIN = 0 | 100 | μA | ||
| I CPout SOURCE | PLL2 charge pump source current (5) | V CPout2 =V CC /2, PLL2_CP_GAIN = 1 | 400 | μA | ||
| I CPout SOURCE | PLL2 charge pump source current (5) | V CPout2 =V CC /2, PLL2_CP_GAIN = 2 | 1600 | μA | ||
| I CPout SOURCE | PLL2 charge pump source current (5) | V CPout2 =V CC /2, PLL2_CP_GAIN = 3 | 3200 | μA | ||
| I CPout SINK | PLL2 charge pump sink current (5) | V CPout2 =V CC /2, PLL2_CP_GAIN = 0 | -100 | μA | ||
| I CPout SINK | PLL2 charge pump sink current (5) | V CPout2 =V CC /2, PLL2_CP_GAIN = 1 | -400 | μA | ||
| I CPout SINK | PLL2 charge pump sink current (5) | V CPout2 =V CC /2, PLL2_CP_GAIN = 2 | -1600 | μA | ||
| I CPout SINK | PLL2 charge pump sink current (5) | V CPout2 =V CC /2, PLL2_CP_GAIN = 3 | -3200 | μA | ||
| I CPout2 %MIS | Charge pump sink/source mismatch | V CPout2 =V CC /2, T A = 25 °C | 1% | 10% | ||
| I CPout2 V TUNE | Magnitude of charge pump current vs. charge pump voltage variation | 0.5 V < V CPout2 < V CC - 0.5 V T A = 25 °C | 4% | |||
| I CPout2 %TEMP | Charge pump current vs. temperature variation | 4% | ||||
| I CPout2 TRI | Charge pump leakage | 0.5 V < V CPout2 < V CC - 0.5 V | 10 | nA | ||
| PN10kHz | PLL 1/f noise at 10-kHz offset (9) . Normalized to 1-GHz output frequency | PLL2_CP_GAIN = 400 μA | -118 | dBc/Hz | ||
| PN10kHz | PLL 1/f noise at 10-kHz offset (9) . Normalized to 1-GHz output frequency | PLL2_CP_GAIN = 3200 μA | -121 | dBc/Hz | ||
| PN1Hz | Normalized phase noise contribution (10) | PLL2_CP_GAIN = 400 μA | -222.5 | dBc/Hz | ||
| PN1Hz | Normalized phase noise contribution (10) | PLL2_CP_GAIN = 3200 μA | -227 | dBc/Hz |
- (10) A specification modeling PLL in-band phase noise. The normalized phase noise contribution of the PLL, LPLL_flat (f), is defined as: PN1HZ=LPLL_flat(f) - 20log(N) - 10log(f PDX ). L PLL_flat (f) is the single side band phase noise measured at an offset frequency, f, in a 1-Hz bandwidth and fPDX is the phase-detector frequency of the synthesizer. L PLL_flat (f) contributes to the total noise, L(f).
(3.15 V < VCC < 3.45 V, -40 °C < TA < 85 °C and TPCB ≤ 105 °C. Typical values at VCC = 3.3 V, TA = 25 °C, at the Recommended Operating Conditions and are not assured.)
| PARAMETER | PARAMETER | TEST CONDITIONS | MIN TYP | MAX | UNIT | |
|---|---|---|---|---|---|---|
| INTERNAL VCO SPECIFICATIONS | INTERNAL VCO SPECIFICATIONS | INTERNAL VCO SPECIFICATIONS | INTERNAL VCO SPECIFICATIONS | INTERNAL VCO SPECIFICATIONS | INTERNAL VCO SPECIFICATIONS | INTERNAL VCO SPECIFICATIONS |
| LMK04821 VCO tuning range | VCO0 | 1930 | 2075 | MHz | ||
| VCO1 (11) | 2920 | 3080 | MHz | |||
| f VCO | LMK04826 VCO tuning range | VCO0 | 1840 | 1970 | MHz | |
| f VCO | VCO1 | 2440 | 2505 | MHz | ||
| LMK04828 VCO tuning range | VCO0 | 2370 | 2630 | MHz | ||
| VCO1 | 2920 | 3080 | MHz | |||
| LMK04821 fine tuning sensitivity | LMK04821 VCO0 LMK04821 VCO1 | 12 to 20 15 to 24 | MHz/V MHz/V | |||
| K VCO | LMK04826 fine tuning sensitivity | LMK04826 VCO0 | 11 to 19 | MHz/V | ||
| K VCO | LMK04826 VCO1 | 8 to 11 | MHz/V | |||
| LMK04828 fine tuning sensitivity | LMK04828 VCO0 at 2457.6 MHz LMK04828 VCO1 at 2949.12 MHz | 17 to 27 17 to 23 | MHz/V MHz/V | |||
| | Δ T CL | | Allowable temperature drift for continuous lock (12) | After programming for lock, no changes to output configuration are permitted to assure continuous lock | 125 | °C |
(3.15 V < VCC < 3.45 V, -40 °C < TA < 85 °C and TPCB ≤ 105 °C. Typical values at VCC = 3.3 V, TA = 25 °C, at the Recommended Operating Conditions and are not assured.)
| NOISE FLOOR | PARAMETER - NOISE FLOOR | TEST CONDITIONS - NOISE FLOOR | TEST CONDITIONS - NOISE FLOOR | MIN TYP - NOISE FLOOR | MAX - NOISE FLOOR | UNIT - NOISE FLOOR | NOISE FLOOR |
|---|---|---|---|---|---|---|---|
| L(f) CLKout | LMK04821, VCO0, noise floor 20-MHz offset (13) | 245.76 MHz | LVDS | -158.2 | dBc/Hz | ||
| L(f) CLKout | LMK04821, VCO0, noise floor 20-MHz offset (13) | 245.76 MHz | HSDS 6 mA | -160 | dBc/Hz | ||
| L(f) CLKout | LMK04821, VCO0, noise floor 20-MHz offset (13) | 245.76 MHz | HSDS 8 mA | -161 | dBc/Hz | ||
| L(f) CLKout | LMK04821, VCO0, noise floor 20-MHz offset (13) | 245.76 MHz | HSDS 10 mA | -161.4 | dBc/Hz | ||
| L(f) CLKout | LMK04821, VCO0, noise floor 20-MHz offset (13) | 245.76 MHz | LVPECL16 with 240 Ω | -161.6 | dBc/Hz | ||
| L(f) CLKout | LMK04821, VCO0, noise floor 20-MHz offset (13) | 245.76 MHz | LVPECL20 with 240 Ω | -162 | dBc/Hz | ||
| L(f) CLKout | LMK04821, VCO0, noise floor 20-MHz offset (13) | 245.76 MHz | LVPECL | 161.7 | dBc/Hz | ||
| L(f) CLKout | LMK04821, VCO1, noise floor 20-MHz offset (13) | 245.76 MHz | LVDS | -157.1 | dBc/Hz | ||
| L(f) CLKout | LMK04821, VCO1, noise floor 20-MHz offset (13) | 245.76 MHz | HSDS 6 mA | -158.3 | dBc/Hz | ||
| L(f) CLKout | LMK04821, VCO1, noise floor 20-MHz offset (13) | 245.76 MHz | HSDS 8 mA | -159 | dBc/Hz | ||
| L(f) CLKout | LMK04821, VCO1, noise floor 20-MHz offset (13) | 245.76 MHz | HSDS 10 mA | -159.2 | dBc/Hz | ||
| L(f) CLKout | LMK04821, VCO1, noise floor 20-MHz offset (13) | 245.76 MHz | LVPECL16 with 240 Ω | -158.8 | dBc/Hz | ||
| L(f) CLKout | LMK04821, VCO1, noise floor 20-MHz offset (13) | 245.76 MHz | LVPECL20 with 240 Ω | -158.9 | dBc/Hz | ||
| L(f) CLKout | LMK04821, VCO1, noise floor 20-MHz offset (13) | 245.76 MHz | LVPECL | -158.8 | dBc/Hz | ||
| L(f) CLKout | LMK04826, VCO0, noise floor 20-MHz offset (14) | 245.76 MHz | LVDS | -158.1 | dBc/Hz | ||
| L(f) CLKout | LMK04826, VCO0, noise floor 20-MHz offset (14) | 245.76 MHz | HSDS 6 mA | -159.7 | dBc/Hz | ||
| L(f) CLKout | LMK04826, VCO0, noise floor 20-MHz offset (14) | 245.76 MHz | HSDS 8 mA | -160.8 | dBc/Hz | ||
| L(f) CLKout | LMK04826, VCO0, noise floor 20-MHz offset (14) | 245.76 MHz | HSDS 10 mA | -161.3 | dBc/Hz | ||
| L(f) CLKout | LMK04826, VCO0, noise floor 20-MHz offset (14) | 245.76 MHz | LVPECL16 with 240 Ω | -161.8 | dBc/Hz | ||
| L(f) CLKout | LMK04826, VCO0, noise floor 20-MHz offset (14) | 245.76 MHz | LVPECL20 with 240 Ω | -162.0 | dBc/Hz | ||
| L(f) CLKout | LMK04826, VCO0, noise floor 20-MHz offset (14) | 245.76 MHz | LCPECL | -161.7 | dBc/Hz | ||
| L(f) CLKout | LMK04826, VCO1, noise floor 20-MHz offset (14) | 245.76 MHz | LVDS | -157.5 | dBc/Hz | ||
| L(f) CLKout | LMK04826, VCO1, noise floor 20-MHz offset (14) | 245.76 MHz | HSDS 6 mA | -158.9 | dBc/Hz | ||
| L(f) CLKout | LMK04826, VCO1, noise floor 20-MHz offset (14) | 245.76 MHz | HSDS 8 mA | -159.8 | dBc/Hz | ||
| L(f) CLKout | LMK04826, VCO1, noise floor 20-MHz offset (14) | 245.76 MHz | HSDS 10 mA | -160.3 | dBc/Hz | ||
| L(f) CLKout | LMK04826, VCO1, noise floor 20-MHz offset (14) | 245.76 MHz | LVPECL16 with 240 Ω | -160.8 | dBc/Hz | ||
| L(f) CLKout | LMK04826, VCO1, noise floor 20-MHz offset (14) | 245.76 MHz | LVPECL20 with 240 Ω | -160.7 | dBc/Hz | ||
| L(f) CLKout | LMK04826, VCO1, noise floor 20-MHz offset (14) | 245.76 MHz | LCPECL | -160.7 | dBc/Hz |
(3.15 V < VCC < 3.45 V, -40 °C < TA < 85 °C and TPCB ≤ 105 °C. Typical values at VCC = 3.3 V, TA = 25 °C, at the Recommended Operating Conditions and are not assured.)
| PARAMETER | TEST CONDITIONS | TEST CONDITIONS | MIN TYP | MAX | UNIT | ||
|---|---|---|---|---|---|---|---|
| NOISE FLOOR (continued) | NOISE FLOOR (continued) | NOISE FLOOR (continued) | NOISE FLOOR (continued) | NOISE FLOOR (continued) | NOISE FLOOR (continued) | NOISE FLOOR (continued) | NOISE FLOOR (continued) |
| L(f) CLKout | 245.76 MHz | LVDS | -156.3 | dBc/Hz | |||
| L(f) CLKout | 245.76 MHz | HSDS 6 mA | -158.4 | dBc/Hz | |||
| L(f) CLKout | 245.76 MHz | HSDS 8 mA | -159.3 | dBc/Hz | |||
| L(f) CLKout | LMK04828, VCO0, noise floor | 245.76 MHz | HSDS 10 mA | -158.9 | dBc/Hz | ||
| 20-MHz | offset (15) | 245.76 MHz | LVPECL16 with 240 Ω | -161.6 | dBc/Hz | ||
| L(f) CLKout | 245.76 MHz | LVPECL20 with 240 Ω LCPECL | -162.5 -162.1 | dBc/Hz dBc/Hz | |||
| L(f) CLKout | LMK04828, VCO1, noise floor offset (15) 245.76 | MHz | LVDS | -155.7 | dBc/Hz | ||
| L(f) CLKout | MHz | HSDS 6 mA | -157.5 | dBc/Hz | |||
| L(f) CLKout | MHz | HSDS 8 mA | -158.1 | dBc/Hz | |||
| L(f) CLKout | MHz | HSDS 10 mA | -157.7 | dBc/Hz | |||
| 20-MHz | MHz | LVPECL16 with 240 Ω | -160.3 | dBc/Hz | |||
| L(f) CLKout | MHz | LVPECL20 with 240 Ω | -161.1 | dBc/Hz | |||
| L(f) CLKout | MHz | LCPECL | -160.8 | dBc/Hz | |||
| CLKout CLOSED LOOP PHASE NOISE SPECIFICATIONS a COMMERCIAL QUALITY VCXO (16) | CLKout CLOSED LOOP PHASE NOISE SPECIFICATIONS a COMMERCIAL QUALITY VCXO (16) | CLKout CLOSED LOOP PHASE NOISE SPECIFICATIONS a COMMERCIAL QUALITY VCXO (16) | CLKout CLOSED LOOP PHASE NOISE SPECIFICATIONS a COMMERCIAL QUALITY VCXO (16) | CLKout CLOSED LOOP PHASE NOISE SPECIFICATIONS a COMMERCIAL QUALITY VCXO (16) | CLKout CLOSED LOOP PHASE NOISE SPECIFICATIONS a COMMERCIAL QUALITY VCXO (16) | CLKout CLOSED LOOP PHASE NOISE SPECIFICATIONS a COMMERCIAL QUALITY VCXO (16) | CLKout CLOSED LOOP PHASE NOISE SPECIFICATIONS a COMMERCIAL QUALITY VCXO (16) |
| L(f) CLKout | Offset = 1 kHz Offset = 10 kHz | -126.9 -133.5 | dBc/Hz dBc/Hz | ||||
| LMK04821 | Offset = 100 kHz | -135.4 | dBc/Hz | ||||
| VCO0 | Offset = 1 MHz | -149.8 | dBc/Hz | ||||
| SSB phase 245.76 | noise (13) | LVDS | -158.1 | dBc/Hz | |||
| MHz | Offset = 10 MHz | HSDS 8 mA | -161.1 | dBc/Hz | |||
| Offset = 10 MHz | LVPECL16 with 240 Ω | -161.7 | dBc/Hz | ||||
| L(f) CLKout | Offset = 1 kHz | -126.8 | dBc/Hz | ||||
| L(f) CLKout | Offset = 10 kHz | -133.4 | dBc/Hz | ||||
| LMK04821 | Offset = 100 kHz | -135.4 | dBc/Hz | ||||
| VCO1 | Offset = 1 MHz | -151.8 | dBc/Hz | ||||
| SSB phase 245.76 | noise (13) MHz | LVDS | -157.2 | dBc/Hz | |||
| L(f) CLKout | Offset = 10 MHz | HSDS 8 mA | -159.1 | dBc/Hz | |||
| L(f) CLKout | LVPECL16 with 240 Ω | -158.9 | dBc/Hz |
(3.15 V < VCC < 3.45 V, -40 °C < TA < 85 °C and TPCB ≤ 105 °C. Typical values at VCC = 3.3 V, TA = 25 °C, at the Recommended Operating Conditions and are not assured.)
| PARAMETER | PARAMETER | TEST | CONDITIONS | MIN TYP | MAX | UNIT |
|---|---|---|---|---|---|---|
| CLKout CLOSED LOOP PHASE NOISE SPECIFICATIONS a COMMERCIAL QUALITY VCXO (continued) | CLKout CLOSED LOOP PHASE NOISE SPECIFICATIONS a COMMERCIAL QUALITY VCXO (continued) | CLKout CLOSED LOOP PHASE NOISE SPECIFICATIONS a COMMERCIAL QUALITY VCXO (continued) Offset = 10 kHz Offset = 100 kHz | CLKout CLOSED LOOP PHASE NOISE SPECIFICATIONS a COMMERCIAL QUALITY VCXO (continued) | CLKout CLOSED LOOP PHASE NOISE SPECIFICATIONS a COMMERCIAL QUALITY VCXO (continued) -134.8 -135.4 | CLKout CLOSED LOOP PHASE NOISE SPECIFICATIONS a COMMERCIAL QUALITY VCXO (continued) | CLKout CLOSED LOOP PHASE NOISE SPECIFICATIONS a COMMERCIAL QUALITY VCXO (continued) dBc/Hz dBc/Hz |
| Offset = 1 MHz | LVDS | -148.2 | dBc/Hz | |||
| L(f) CLKout | Offset = 1 MHz | HSDS 8 mA LVPECL16 with 240 Ω | -148.6 | dBc/Hz | ||
| Offset = 10 MHz | LVDS | -157.8 | dBc/Hz | |||
| Offset = 10 MHz | HSDS 8 mA | -160.4 | dBc/Hz | |||
| Offset = 10 MHz | LVPECL16 with 240 Ω | -161.5 | dBc/Hz | |||
| L(f) CLKout | Offset = 10 kHz | -134.3 | dBc/Hz | |||
| L(f) CLKout | Offset = 100 kHz | -133.7 | dBc/Hz | |||
| Offset = 1 MHz | LVDS | -152.5 | dBc/Hz | |||
| Offset = 1 MHz | HSDS 8 mA LVPECL16 with 240 Ω | -153.6 | dBc/Hz | |||
| Offset = 10 MHz | LVDS | -157.3 | dBc/Hz | |||
| Offset = 10 MHz | HSDS 8 mA | -159.6 | dBc/Hz | |||
| Offset = 10 MHz | LVPECL16 with 240 Ω | -160.5 | dBc/Hz | |||
| L(f) CLKout | Offset = 1 kHz | -124.3 | dBc/Hz | |||
| L(f) CLKout | Offset = 10 kHz | -134.7 | dBc/Hz | |||
| L(f) CLKout | Offset = 100 kHz | -136.5 | dBc/Hz | |||
| L(f) CLKout | Offset = 1 MHz | -148.4 | dBc/Hz | |||
| L(f) CLKout | Offset = 10 MHz | LVDS | -156.4 | dBc/Hz | ||
| L(f) CLKout | Offset = 10 MHz | HSDS 8 mA | -159.1 | dBc/Hz | ||
| L(f) CLKout | Offset = 10 MHz | LVPECL16 with 240 Ω | -160.8 | dBc/Hz | ||
| L(f) CLKout | Offset = 1 kHz | -124.2 | dBc/Hz | |||
| L(f) CLKout | Offset = 10 kHz | -134.4 | dBc/Hz | |||
| L(f) CLKout | Offset = 100 kHz | -135.2 | dBc/Hz | |||
| L(f) CLKout | Offset = 1 MHz | -151.5 | dBc/Hz | |||
| Offset = 10 MHz | LVDS | -159.9 | dBc/Hz | |||
| Offset = 10 MHz | HSDS 8 mA | -155.8 | dBc/Hz | |||
| Offset = 10 MHz | LVPECL16 with 240 Ω | -158.1 | dBc/Hz |
(3.15 V < VCC < 3.45 V, -40 °C < TA < 85 °C and TPCB ≤ 105 °C. Typical values at VCC = 3.3 V, TA = 25 °C, at the Recommended Operating Conditions and are not assured.)
| PARAMETER | TEST CONDITIONS | TYP | MAX | UNIT | ||
|---|---|---|---|---|---|---|
| CLKout CLOSED LOOP JITTER SPECIFICATIONS a COMMERCIAL QUALITY VCXO (16) | CLKout CLOSED LOOP JITTER SPECIFICATIONS a COMMERCIAL QUALITY VCXO (16) LVDS, BW = 12 kHz to 20 MHz HSDS 8 mA, BW = 12 kHz to 20 MHz LVPECL16 with 240 Ω , BW = 12 kHz to 20 MHz LVPECL20 with 240 Ω , BW = 12 kHz to 20 MHz LCPECL with 240 Ω , BW = 12 kHz to 20 MHz | CLKout CLOSED LOOP JITTER SPECIFICATIONS a COMMERCIAL QUALITY VCXO (16) 99 94 96 94 93 | CLKout CLOSED LOOP JITTER SPECIFICATIONS a COMMERCIAL QUALITY VCXO (16) | CLKout CLOSED LOOP JITTER SPECIFICATIONS a COMMERCIAL QUALITY VCXO (16) fs rms fs rms fs rms fs rms fs rms | CLKout CLOSED LOOP JITTER SPECIFICATIONS a COMMERCIAL QUALITY VCXO (16) | CLKout CLOSED LOOP JITTER SPECIFICATIONS a COMMERCIAL QUALITY VCXO (16) |
| J CLKout | LVDS, BW = 12 kHz to 20 MHz | 96 | fs rms | |||
| J CLKout | HSDS 8 mA, BW = 12 kHz to 20 MHz | 90 | fs rms | |||
| J CLKout | LVPECL16 with 240 Ω , BW = 12 kHz to 20 MHz | 92 | fs rms | |||
| J CLKout | LVPECL20 with 240 Ω , BW = 12 kHz to 20 MHz | 91 | fs rms | |||
| J CLKout | LCPECL with 240 Ω , BW = 12 kHz to 20 MHz | 91 | fs rms | |||
| CLKout CLOSED LOOP JITTER SPECIFICATIONS a COMMERCIAL QUALITY VCXO (continued) (16) | CLKout CLOSED LOOP JITTER SPECIFICATIONS a COMMERCIAL QUALITY VCXO (continued) (16) LVDS, BW = 100 Hz to 20 MHz LVDS, BW = 12 kHz to 20 MHz HSDS 8 mA, BW = 100 Hz to 20 MHz HSDS 8 mA, BW = 12 kHz to 20 MHz LVPECL16 /w 240 Ω , BW = 100 Hz to 20 MHz LVPECL16 /w 240 Ω , BW = 12 kHz to 20 MHz LCPECL /w 240 Ω , BW = 100 Hz to 20 MHz LCPECL /w 240 Ω , BW = 12 kHz to 20 MHz | CLKout CLOSED LOOP JITTER SPECIFICATIONS a COMMERCIAL QUALITY VCXO (continued) (16) 106 104 99 97 99 96 100 97 | CLKout CLOSED LOOP JITTER SPECIFICATIONS a COMMERCIAL QUALITY VCXO (continued) (16) | CLKout CLOSED LOOP JITTER SPECIFICATIONS a COMMERCIAL QUALITY VCXO (continued) (16) fs rms fs rms fs rms fs rms fs rms fs rms fs rms fs rms | CLKout CLOSED LOOP JITTER SPECIFICATIONS a COMMERCIAL QUALITY VCXO (continued) (16) | CLKout CLOSED LOOP JITTER SPECIFICATIONS a COMMERCIAL QUALITY VCXO (continued) (16) |
| J CLKout | LVDS, BW = 100 Hz to 20 MHz | 99 | fs rms | |||
| J CLKout | LVDS, BW = 12 kHz to 20 MHz | 97 | fs rms | |||
| J CLKout | HSDS 8 mA, BW = 100 Hz to 20 MHz | 92 | fs rms | |||
| J CLKout | HSDS 8 mA, BW = 12 kHz to 20 MHz | 90 | fs rms | |||
| J CLKout | LVPECL16 /w 240 Ω , BW = 100 Hz to 20 MHz | 91 | fs rms | |||
| J CLKout | LVPECL20 /w 240 Ω , BW = 12 kHz to 20 MHz | 89 | fs rms | |||
| J CLKout | LCPECL /w 240 Ω , BW = 100 Hz to 20 MHz | 92 | fs rms | |||
| J CLKout | LCPECL /w 240 Ω , BW = 12 kHz to 20 MHz | 89 | fs rms |
(3.15 V < VCC < 3.45 V, -40 °C < TA < 85 °C and TPCB ≤ 105 °C. Typical values at VCC = 3.3 V, TA = 25 °C, at the Recommended Operating Conditions and are not assured.)
| PARAMETER | PARAMETER | TEST CONDITIONS | MIN TYP | UNIT | ||
|---|---|---|---|---|---|---|
| CLKout CLOSED LOOP JITTER SPECIFICATIONS a COMMERCIAL QUALITY VCXO (continued) (16) | CLKout CLOSED LOOP JITTER SPECIFICATIONS a COMMERCIAL QUALITY VCXO (continued) (16) J CLKout | CLKout CLOSED LOOP JITTER SPECIFICATIONS a COMMERCIAL QUALITY VCXO (continued) (16) LVDS, BW = 100 Hz to 20 MHz LVDS, BW = 12 kHz to 20 MHz HSDS 8 mA, BW = 100 Hz to 20 MHz HSDS 8 mA, BW = 12 kHz to 20 MHz LVPECL16 /w 240 Ω , BW = 100 Hz to 20 MHz LVPECL20 /w 240 Ω , BW = 12 kHz to 20 MHz LCPECL /w 240 Ω , BW = 100 Hz to 20 MHz LCPECL /w 240 Ω , BW = 12 kHz to 20 MHz LVDS, BW = 100 Hz to 20 MHz LVDS, BW = 12 kHz to 20 MHz HSDS 8 mA, BW = 100 Hz to 20 MHz HSDS 8 mA, BW = 12 kHz to 20 MHz LVPECL16 /w 240 Ω , BW = 100 Hz to 20 MHz LVPECL20 /w 240 Ω , BW = 12 kHz to 20 MHz LCPECL /w 240 Ω , BW = 100 Hz to 20 MHz LCPECL /w 240 Ω , BW = 12 kHz to 20 MHz | CLKout CLOSED LOOP JITTER SPECIFICATIONS a COMMERCIAL QUALITY VCXO (continued) (16) 112 109 102 99 98 95 96 93 108 105 98 94 93 90 91 88 | CLKout CLOSED LOOP JITTER SPECIFICATIONS a COMMERCIAL QUALITY VCXO (continued) (16) fs rms fs rms fs rms fs rms fs rms fs rms fs rms fs rms | CLKout CLOSED LOOP JITTER SPECIFICATIONS a COMMERCIAL QUALITY VCXO (continued) (16) | CLKout CLOSED LOOP JITTER SPECIFICATIONS a COMMERCIAL QUALITY VCXO (continued) (16) |
(3.15 V < VCC < 3.45 V, -40 °C < TA < 85 °C and TPCB ≤ 105 °C. Typical values at VCC = 3.3 V, TA = 25 °C, at the Recommended Operating Conditions and are not assured.)
(3.15 V < VCC < 3.45 V, -40 °C < TA < 85 °C and TPCB ≤ 105 °C. Typical values at VCC = 3.3 V, TA = 25 °C, at the Recommended Operating Conditions and are not assured.)
| PARAMETER | PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT |
|---|---|---|---|---|---|---|
| DEFAULT POWER on RESET CLOCK OUTPUT FREQUENCY | DEFAULT POWER on RESET CLOCK OUTPUT FREQUENCY | DEFAULT POWER on RESET CLOCK OUTPUT FREQUENCY | DEFAULT POWER on RESET CLOCK OUTPUT FREQUENCY | DEFAULT POWER on RESET CLOCK OUTPUT FREQUENCY | DEFAULT POWER on RESET CLOCK OUTPUT FREQUENCY | DEFAULT POWER on RESET CLOCK OUTPUT FREQUENCY |
| f CLKout-startup | Default output clock frequency at | LMK04826 | 235 | MHz | ||
| f CLKout-startup | device power on (17)(18) | LMK04828 | 315 | |||
| f OSCout | OSCout frequency | (7) | 500 | MHz | ||
| CLOCK SKEW and DELAY | CLOCK SKEW and DELAY | CLOCK SKEW and DELAY | CLOCK SKEW and DELAY | CLOCK SKEW and DELAY | CLOCK SKEW and DELAY | CLOCK SKEW and DELAY |
| |T SKEW | | DCLKoutX to SDCLKoutY F CLK = 245.76 MHz, R L = 100 Ω AC coupled (19) | Same pair, same format (20) SDCLKoutY_MUX = 0 (device clock) | 25 | |ps| | ||
| |T SKEW | | Maximum DCLKoutX or SDCLKoutY to DCLKoutX or SDCLKoutY F CLK = 245.76 MHz, R L = 100 Ω AC coupled | Any pair, same format (20) SDCLKoutY_MUX = 0 (device clock) | 50 | |||
| ts JESD204B | SYSREF to device clock setup time base reference. See SYSREF to Device Clock Alignment to adjust SYSREF to device clock setup time as required. | SDCLKoutY_MUX = 1 (SYSREF) SYSREF_DIV = 30 SYSREF_DDLY = 8 (global) SDCLKoutY_DDLY = 1 (2 cycles, local) DCLKoutX_MUX = 1 (Div+DCC+HS) DCLKoutX_DIV = 30 DCLKoutX_DDLY_CNTH = 7 DCLKoutX_DDLY_CNTL = 6 DCLKoutX_HS = 0 SDCLKoutY_HS = 0 | -80 | ps | ||
| t PD CLKin0_ SDCLKout1 | Propagation delay from CLKin0 to SDCLKout1 | CLKin0_OUT_MUX = 0 (SYSREF mux) SYSREF_CLKin0_MUX = 1 (CLKin0) SDCLKout1_PD = 0 SDCLKout1_DDLY = 0 (bypass) SDCLKout1_MUX = 1 (SR) EN_SYNC = 1 LVPECL16 /w 240 Ω | 0.65 | ns | ||
| f ADLY max | Maximum analog delay frequency | DCLKoutX_MUX = 4 | 1536 | MHz | ||
| LVDS CLOCK OUTPUTS (DCLKoutX, SDCLKoutY, and OSCout) | LVDS CLOCK OUTPUTS (DCLKoutX, SDCLKoutY, and OSCout) | LVDS CLOCK OUTPUTS (DCLKoutX, SDCLKoutY, and OSCout) | LVDS CLOCK OUTPUTS (DCLKoutX, SDCLKoutY, and OSCout) | LVDS CLOCK OUTPUTS (DCLKoutX, SDCLKoutY, and OSCout) | LVDS CLOCK OUTPUTS (DCLKoutX, SDCLKoutY, and OSCout) | LVDS CLOCK OUTPUTS (DCLKoutX, SDCLKoutY, and OSCout) |
| V OD | Differential output voltage | T = 25 °C, DC measurement AC coupled to receiver input R L = 100- Ω differential termination | 395 | |mV| | ||
| Δ V OD | Change in magnitude of V OD for complementary output states | T = 25 °C, DC measurement AC coupled to receiver input R L = 100- Ω differential termination | -60 | 60 | mV | |
| V OS | Output offset voltage | T = 25 °C, DC measurement AC coupled to receiver input R L = 100- Ω differential termination | 1.125 | 1.25 | 1.375 | V |
| Δ V OS | Change in V OS for complementary output states | T = 25 °C, DC measurement AC coupled to receiver input R L = 100- Ω differential termination | 35 | |mV| | ||
| T R / T F | Output rise time | 20% to 80%, R L = 100 Ω , 245.76 MHz | 180 | ps | ||
| T R / T F | Output fall time | 80% to 20%, R L = 100 Ω | 180 | |||
| I SA I SB | Output short circuit current - single ended | Single-ended output shorted to GND T = 25 °C | -24 | 24 | mA | |
| I SAB | Output short circuit current - differential | Complimentary outputs tied together | -12 | 12 | mA |
(3.15 V < VCC < 3.45 V, -40 °C < TA < 85 °C and TPCB ≤ 105 °C. Typical values at VCC = 3.3 V, TA = 25 °C, at the Recommended Operating Conditions and are not assured.)
| TEST | PARAMETER | CONDITIONS | MIN TYP | MAX | UNIT |
|---|---|---|---|---|---|
| 6-mA HSDS CLOCK OUTPUTS (DCLKoutX and SDCLKoutY) | |||||
| V OH T = 25 °C, DC | measurement | V CC - 1.05 | |||
| Termination = 50 V CC - 1.42 V V OL | Ω to | V CC - 1.64 | |||
| V OD | Differential output voltage | 590 | |mV| | ||
| Δ V OD | Change in V OD for complementary output states | -80 | 80 | mVpp | |
| 8-mA HSDS CLOCK OUTPUTS (DCLKoutX and SDCLKoutY) | |||||
| T / T F | Output rise time | 245.76 MHz, 20% to 80%, R L = 100 Ω | 170 | ps | |
| R | Output fall time | 245.76 MHz, 80% to 20%, R L = 100 Ω | |||
| V OH T = 25 °C, DC | measurement | V CC - 1.26 | |||
| Termination = 50 V CC - 1.64 V V OL | Ω to | V CC -2.06 | |||
| V OD | Differential output voltage | 800 | |mV| | ||
| Δ V OD | Change in V OD for complementary output states | -115 | 115 | mVpp | |
| 10-mA HSDS CLOCK OUTPUTS (DCLKoutX and SDCLKoutY) | |||||
| V OH T = 25 °C, DC | measurement | V CC - 0.99 | |||
| Termination = 50 V CC - 1.43 V V OL | Ω to | V CC - 1.97 | |||
| V OD | 980 | |mv| | |||
| Δ V OD | Change in V OD for complementary output states | -115 | 115 | mVpp | |
| LVPECL CLOCK OUTPUTS (DCLKoutX and SDCLKoutY) | |||||
| T / T F | 20% to 80% output rise | R L = 100 Ω , emitter resistors = 240 Ω to GND | 150 | ||
| R | 80% to 20% output fall time | DCLKoutX_TYPE = 4 or 5 (1600 or 2000 mVpp) | ps | ||
| 1600-mVpp LVPECL CLOCK OUTPUTS (DCLKoutX and SDCLKoutY) | |||||
| V OH | Output high voltage | V CC - 1.04 | V | ||
| DC measurement Termination = 50 V CC - 2.0 V V OL | Output low voltage | Ω to | V CC - 1.80 | V | |
| V OD | Output voltage Figure 9 | 760 | |mV| | ||
| 2000-mVpp LVPECL CLOCK OUTPUTS (DCLKoutX and SDCLKoutY) | |||||
| V OH | Output high voltage | V CC - 1.09 | V | ||
| DC measurement Termination = 50 V OL | Output low voltage | Ω to V CC - 2.3 V | V CC - 2.05 | V | |
| V OD | Output voltage Figure 9 | 960 | |mV| | ||
| LCPECL CLOCK OUTPUTS (DCLKoutX and SDCLKoutY) | |||||
| V OH | Output high voltage | 1.57 | V | ||
| V OL | Output low voltage | DC measurement | 0.62 | V | |
| Termination = 50 V OD | Output voltage Figure 9 | Ω to 0.5 V | 950 | |mV| |
(3.15 V < VCC < 3.45 V, -40 °C < TA < 85 °C and TPCB ≤ 105 °C. Typical values at VCC = 3.3 V, TA = 25 °C, at the Recommended Operating Conditions and are not assured.)
(3.15 V < VCC < 3.45 V, -40 °C < TA < 85 °C and TPCB ≤ 105 °C. Typical values at VCC = 3.3 V, TA = 25 °C, at the Recommended Operating Conditions and are not assured.)
| PARAMETER | PARAMETER | TEST CONDITIONS | MIN | TYP | MAX | UNIT |
|---|---|---|---|---|---|---|
| LVCMOS CLOCK OUTPUTS (OSCout) | LVCMOS CLOCK OUTPUTS (OSCout) | LVCMOS CLOCK OUTPUTS (OSCout) | LVCMOS CLOCK OUTPUTS (OSCout) | LVCMOS CLOCK OUTPUTS (OSCout) | LVCMOS CLOCK OUTPUTS (OSCout) | LVCMOS CLOCK OUTPUTS (OSCout) |
| f CLKout | Maximum frequency (21) | 5-pF load | 250 | MHz | ||
| V OH | Output high voltage | 1-mA load | V CC - 0.1 | V | ||
| V OL | Output low voltage | 1-mA load | 0.1 | V | ||
| I OH | Output high current (source) | V CC = 3.3 V, V O = 1.65 V | 28 | mA | ||
| I OL | Output low current (sink) | V CC = 3.3 V, V O = 1.65 V | 28 | mA | ||
| DUTY CLK | Output duty cycle (22) | V CC /2 to V CC /2, F CLK = 100 MHz, T = 25 °C | 50% | |||
| T R | Output rise time | 20% to 80%, R L = 50 Ω , C L = 5 pF | 400 | ps | ||
| T F | Output fall time | 80% to 20%, R L = 50 Ω , C L = 5 pF | 400 | ps | ||
| DIGITAL OUTPUTS (CLKin_SELX, Status_LDX, and RESET/GPO) | DIGITAL OUTPUTS (CLKin_SELX, Status_LDX, and RESET/GPO) | DIGITAL OUTPUTS (CLKin_SELX, Status_LDX, and RESET/GPO) | DIGITAL OUTPUTS (CLKin_SELX, Status_LDX, and RESET/GPO) | DIGITAL OUTPUTS (CLKin_SELX, Status_LDX, and RESET/GPO) | DIGITAL OUTPUTS (CLKin_SELX, Status_LDX, and RESET/GPO) | DIGITAL OUTPUTS (CLKin_SELX, Status_LDX, and RESET/GPO) |
| V OH | High-level output voltage | I OH = -500 μA CLKin_SELX_TYPE = 3 or 4 Status_LDX_TYPE = 3 or 4 RESET_TYPE = 3 or 4 | V CC - 0.4 | V | ||
| V OL | Low-level output voltage | I OL = 500 μA CLKin_SELX_TYPE = 3, 4, or 6 Status_LDX_TYPE = 3, 4, or 6 RESET_TYPE = 3, 4, or 6 | 0.4 | V | ||
| DIGITAL OUTPUT (SDIO) | DIGITAL OUTPUT (SDIO) | DIGITAL OUTPUT (SDIO) | DIGITAL OUTPUT (SDIO) | DIGITAL OUTPUT (SDIO) | DIGITAL OUTPUT (SDIO) | DIGITAL OUTPUT (SDIO) |
| V OH | High-level output voltage | I OH = -500 μA ; During SPI read. SDIO_RDBK_TYPE = 0 | V CC - 0.4 | V | ||
| V OL | Low-level output voltage | I OL = 500 μA ; During SPI read. SDIO_RDBK_TYPE = 0 or 1 | 0.4 | V | ||
| DIGITAL INPUTS (CLKinX_SEL, RESET/GPO, SYNC, SCK, SDIO, or CS*) | DIGITAL INPUTS (CLKinX_SEL, RESET/GPO, SYNC, SCK, SDIO, or CS*) | DIGITAL INPUTS (CLKinX_SEL, RESET/GPO, SYNC, SCK, SDIO, or CS*) | DIGITAL INPUTS (CLKinX_SEL, RESET/GPO, SYNC, SCK, SDIO, or CS*) | DIGITAL INPUTS (CLKinX_SEL, RESET/GPO, SYNC, SCK, SDIO, or CS*) | DIGITAL INPUTS (CLKinX_SEL, RESET/GPO, SYNC, SCK, SDIO, or CS*) | DIGITAL INPUTS (CLKinX_SEL, RESET/GPO, SYNC, SCK, SDIO, or CS*) |
| V IH | High-level input voltage | 1.2 | V CC | V | ||
| V IL | Low-level input voltage | 0.4 | V | |||
| DIGITAL INPUTS (CLKinX_SEL) | DIGITAL INPUTS (CLKinX_SEL) | DIGITAL INPUTS (CLKinX_SEL) | DIGITAL INPUTS (CLKinX_SEL) | DIGITAL INPUTS (CLKinX_SEL) | DIGITAL INPUTS (CLKinX_SEL) | DIGITAL INPUTS (CLKinX_SEL) |
| I IH | High-level input current V IH = V CC | CLKin_SELX_TYPE = 0, (high impedance) | -5 | 5 | μA | |
| I IH | High-level input current V IH = V CC | CLKin_SELX_TYPE = 1 (pull-up) | -5 | 5 | μA | |
| I IH | High-level input current V IH = V CC | CLKin_SELX_TYPE = 2 (pull-down) | 10 | 80 | μA | |
| I IL | Low-level input current V IL = 0 V | CLKin_SELX_TYPE = 0, (high impedance) | -5 | 5 | μA | |
| I IL | Low-level input current V IL = 0 V | CLKin_SELX_TYPE = 1 (pull-up) | -40 | -5 | μA | |
| I IL | Low-level input current V IL = 0 V | CLKin_SELX_TYPE = 2 (pull-down) | -5 | 5 | μA | |
| DIGITAL INPUT (RESET/GPO) | DIGITAL INPUT (RESET/GPO) | DIGITAL INPUT (RESET/GPO) | DIGITAL INPUT (RESET/GPO) | DIGITAL INPUT (RESET/GPO) | DIGITAL INPUT (RESET/GPO) | DIGITAL INPUT (RESET/GPO) |
| I IH | High-level input current V IH = V CC | RESET_TYPE = 2 (pull-down) | 10 | 80 | μA | |
| I IL | RESET_TYPE = 0 (high impedance) | -5 | 5 | |||
| Low-level input current V IL = 0 V | RESET_TYPE = 1 (pull-up) | -40 | -5 | μA | ||
| Low-level input current V IL = 0 V | RESET_TYPE = 2 (pull-down) | -5 | 5 | μA | ||
| DIGITAL INPUTS (SYNC) | DIGITAL INPUTS (SYNC) | DIGITAL INPUTS (SYNC) | DIGITAL INPUTS (SYNC) | DIGITAL INPUTS (SYNC) | DIGITAL INPUTS (SYNC) | DIGITAL INPUTS (SYNC) |
| I IH | High-level input current | V IH = V CC | 25 | |||
| I IL | Low-level input current | V IL = 0 V | -5 | 5 | μA | |
| DIGITAL INPUTS (SCK, SDIO, CS*) | DIGITAL INPUTS (SCK, SDIO, CS*) | DIGITAL INPUTS (SCK, SDIO, CS*) | DIGITAL INPUTS (SCK, SDIO, CS*) | DIGITAL INPUTS (SCK, SDIO, CS*) | DIGITAL INPUTS (SCK, SDIO, CS*) | DIGITAL INPUTS (SCK, SDIO, CS*) |
(3.15 V < VCC < 3.45 V, -40 °C < TA < 85 °C and TPCB ≤ 105 °C. Typical values at VCC = 3.3 V, TA = 25 °C, at the Recommended Operating Conditions and are not assured.)
| PARAMETER | CONDITIONS | TEST | MIN | TYP | MAX | UNIT |
|---|---|---|---|---|---|---|
| I IH | High-level input current | V IH = V CC | -5 | 5 | μA | |
| I IL | Low-level input current | V IL = 0 | -5 | 5 | μA | |
| DIGITAL INPUT TIMING | DIGITAL INPUT TIMING | |||||
| t HIGH | RESET pin held high for device reset | 25 | ns |
(3.15 V < VCC < 3.45 V, -40 °C < TA < 85 °C and TPCB ≤ 105 °C. Typical values at VCC = 3.3 V, TA = 25 °C, at the Recommended Operating Conditions and are not assured.)
LMK04828BISQX/NOPB Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted) (1)
| MIN | MAX | UNIT | ||
|---|---|---|---|---|
| V CC | Supply voltage (2) | -0.3 | 3.6 | V |
| V IN | Input voltage | -0.3 | (V CC + 0.3) | V |
| T L | Lead temperature (solder 4 seconds) | 260 | °C | |
| T J | Junction temperature | 150 | °C | |
| I IN | Differential input current (CLKinX/X*, OSCin/OSCin*, FBCLKin/FBCLKin*, Fin/Fin*) | ± 5 | mA | |
| MSL | Moisture sensitivity level | 3 | ||
| T stg | Storage temperature | -65 | 150 | °C |
LMK04828BISQX/NOPB Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)
| MIN | TYP | MAX | UNIT | ||
|---|---|---|---|---|---|
| T J | Junction temperature | 125 | °C | ||
| T A | Ambient temperature | -40 | 25 | 85 | °C |
| T PCB | PCB temperature (measured at thermal pad) | 105 | °C | ||
| V CC | Supply voltage | 3.15 | 3.3 | 3.45 | V |
LMK04828BISQX/NOPB Thermal Information
| THERMAL METRIC | (1) | LMK0482x NKD (WQFN) 64 PINS | UNIT |
|---|---|---|---|
| R θ JA | Junction-to-ambient thermal resistance (2) | 24.3 | °C/W |
| R θ JC(top) | Junction-to-case (top) thermal resistance (3) | 6.1 | °C/W |
| R θ JB | Junction-to-board thermal resistance (4) | 3.5 | °C/W |
LMK04828BISQX/NOPB Typical Application
To assist customers in frequency planning and designing loop filters, Texas Instruments provides PLLatinum Sim (www.ti.com/tool/PLLATINUMSIM-SW) and TICS Pro (www.ti.com/tool/TICSPRO-SW).
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| LMK04828 | Texas Instruments | WQFN-64 9x9mm |
| LMK04828-EP | Texas Instruments | WQFN-64 9x9mm |
| LMK04828B | Texas Instruments | WQFN-64 9x9mm |
| LMK04828B/26B | Texas Instruments | WQFN-64 9x9mm |
| LMK04828BISQ | Texas Instruments | WQFN-64 9x9mm |
| LMK04828BISQ/NOPB | Texas Instruments | 64-Pin QFN |
| LMK04828BISQE/NOPB | Texas Instruments | WQFN-64 9x9mm |
| LMK04828BISQX | Texas Instruments | WQFN-64 9x9mm |
Other Integrated Circuits
- STM32F103C8T6 – STMicroelectronics, Microcontroller
- STM32F405RGT6 – STMicroelectronics, ARM Cortex-M4 MCU
- SN74AVC4T245PWR – Texas Instruments, Dual-Supply Bus Transceiver Level Translator
- STM32F446RCT6 – STMicroelectronics, ARM Cortex-M4 MCU
- STM32G070RBT6 – STMicroelectronics, Arm Cortex-M0+ 32-bit MCU
- ADS131M08IPBSR – Texas Instruments, Delta-Sigma ADC
- ISO1540DR – Texas Instruments, Bidirectional I²C Isolator
- ISO7740DBQR – Texas Instruments, Digital Isolator
All Integrated Circuits datasheetsAll Texas Instruments datasheets (2,417)
Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.
Ask your AI agent about the LMK04828BISQX/NOPB
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the LMK04828BISQX/NOPB run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.