BZT52C5V6S
Rating and Characteristic Curves
Manufacturer
HY Electronic (Cayman) Limited
Package
SOD-323
Overview
Part: HY Electronic (Cayman) Limited Zener Diode
Type: Surface Mount Zener Diode
Key Specs:
- Zener Voltage Range: 5.2V (Min), 5.6V (Typ), 6.0V (Max) @ Izt=5mA
- Power Dissipation: 200mW
- Reverse Leakage Current: 1 uA (Max) @ VR=2V
- Zener Impedance: 40 Ω (Max) @ Izt=5mA
Features:
- Surface Device Type Mounting
- Low Zener Impedance
- High Stability and High Reliability
- "Green" Molding Compound UL Flammability Classification Rating 94V-0
- RoHS compliant
- Halogen Free
Package:
- SOD323 Package
Pin Configuration
Electrical Characteristics
| Parameter | Test Conditions | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Zener Voltage Range | Vz@Izt=5mA | Vz | 5.2 | 5.6 | 6.0 | V |
| Zener Impedance | Zzt@lzt=5mA | Zzt | - | - | 40 | Ω |
| Zener Impedance | Zzk@lzk=1mA | Zzk | - | - | 400 | Ω |
| Reverse Leakage Current | IR@VR=2V | IR | - | - | 1 | uA |
| Typical Temperature Coefficent | Tc@lztc | Iztc | -2.0 | - | 2.5 | mV/ ∘ C |
Note:1. Short duration test pulse used to minimize self-heating effect
- Device mounted on ceramic PCB: 7.6mm x 9.4mm x 0.87mm with pad areas 25mm2
Absolute Maximum Ratings
Absolute Ratings
| Parameter | Symbol | Value | Unit |
|---|---|---|---|
| Forward Voltage @ IF = 10mA | VF | 0.9 (1) | V |
| Power Dissipation | Po | 200 (2) | mW |
| Junction Temperature | TJ | 150 | ° C |
| Storage Temperature Range | Tѕтc | -65 to +150 | ° C |
| Thermal Resistance from Junction to Ambient Air | RөJA | 400 | K/W (1) |
Electrical Characteristics
| Parameter | Test Conditions | Symbol | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Zener Voltage Range | Vz@Izt=5mA | Vz | 5.2 | 5.6 | 6.0 | V |
| Zener Impedance | Zzt@lzt=5mA | Zzt | - | - | 40 | Ω |
| Zener Impedance | Zzk@lzk=1mA | Zzk | - | - | 400 | Ω |
| Reverse Leakage Current | IR@VR=2V | IR | - | - | 1 | uA |
| Typical Temperature Coefficent | Tc@lztc | Iztc | -2.0 | - | 2.5 | mV/ ∘ C |
Note:1. Short duration test pulse used to minimize self-heating effect
- Device mounted on ceramic PCB: 7.6mm x 9.4mm x 0.87mm with pad areas 25mm2
Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.
Get structured datasheet data via API
Get started free