nRF7000-QFAA-R7

Part: nRF7000 from Nordic Semiconductor ASA

Type: Companion IC with integrated RF for passive and active Wi-Fi® scanning

Key Specs:

• Maximum output power 21 dBm
• 252 mA @ max output power, 2.4 GHz, 1DSSS
• 260 mA @ max output power, 5 GHz, 6Mbps
• 60 mA RX 2.4 GHz
• 56 mA RX 5 GHz
• Supply voltage range 2.9 – 4.5 V
• Operating temperature range -40° C to 85° C

Features:

• Companion IC with integrated RF for passive and active Wi-Fi® scanning
• Compatible with IEEE 802.11 ax and earlier standards (IEEE 802.11 a/b/g/n/ac)
• Dual-band 2.4 GHz and 5 GHz operation
• Single-ended 50 Ω antenna port
• SPI or QSPI host interface, 3-wire or 4-wire coexistence interface

Applications:

• Wi-Fi locationing based on SSID scanning
• Asset tracking
• Indoor navigation
• Biking and sports tracking

Package:

• QFN48: 6x6 mm

Key features Applications

• Companion IC with integrated RF for passive and active Wi-Fi ® scanning

• Compatible with IEEE 802.11 ax and earlier standards (IEEE 802.11 a/b/g/n/ac)

• Maximum output power 21 dBm

• Dual-band 2.4 GHz and 5 GHz operation

• Single-ended 50 Ω antenna port

• 252 mA @ max output power, 2.4 GHz, 1DSSS

• 260 mA @ max output power, 5 GHz, 6Mbps

• 60 mA RX 2.4 GHz, 56 mA RX 5 GHz

• SPI or QSPI host interface, 3-wire or 4-wire coexistence interface

• Supply voltage range 2.9 4.5 V

• Operating temperature range -40° C to 85° C

• 6x6 mm QFN48 package

• Wi-Fi locationing based on SSID scanning

  • Asset tracking
  • Indoor navigation
  • Biking and sports tracking

• Companion IC with integrated RF for passive and active Wi-Fi ® scanning

• Compatible with IEEE 802.11 ax and earlier standards (IEEE 802.11 a/b/g/n/ac)

• Maximum output power 21 dBm

• Dual-band 2.4 GHz and 5 GHz operation

• Single-ended 50 Ω antenna port

• 252 mA @ max output power, 2.4 GHz, 1DSSS

• 260 mA @ max output power, 5 GHz, 6Mbps

• 60 mA RX 2.4 GHz, 56 mA RX 5 GHz

• SPI or QSPI host interface, 3-wire or 4-wire coexistence interface

• Supply voltage range 2.9 4.5 V

• Operating temperature range -40° C to 85° C

• 6x6 mm QFN48 package

• Wi-Fi locationing based on SSID scanning

  • Asset tracking
  • Indoor navigation
  • Biking and sports tracking

The pin assignment figure and tables describe the pinouts for the device. There are also recommendations for how the General-Purpose Input/Output (GPIO) pins should be configured, in addition to any usage restrictions.

Figure 16: Pin assignments

Pin	Name	Function	Description
1	OTPVDD	Power
2	N.C.		Do not connect
3	N.C.		Do not connect
4	N.C.		Do not connect
5	N.C.		Do not connect
6	N.C.		Do not connect
7	TXRF<1>	RF	5 GHz
8	PAVDD<1>	Power
9	TXRF<0>	RF	2.4 GHz
10	PAVDD<0>	Power
11	SXLDO	Power
12	PALDO	Power
13	VBAT	Power
14	RFVDD	Power
15	RFBUCKVDD	Power
16	XOLDO	Power
17	XOP	Analog input	40 MHz crystal

Table 18: Pin assignments

Maximum ratings are the extreme limits to which the chip can be exposed for a limited amount of time without permanently damaging it. Exposure to absolute maximum ratings for prolonged periods of time may affect the reliability of the device.

Table 11: Absolute maximum ratings

The operating conditions are the physical parameters that the chip can operate within.

Table 10: Recommended operating conditions