Texas Instruments Datasheets
2,418 Texas Instruments datasheets read into specs, pinouts and ratings, including Integrated Circuits, Switching Regulators (Buck) and Operational Amplifiers.
Texas Instruments datasheets, page 45
2,418 parts · page 45 of 81. Most used first, then by part number.
OPA376AIDR
Texas Instruments
OPA4188
Texas Instruments
36V zero-drift, low-noise, rail-to-Rail output op amp with 25 μV max offset and 0.03 μV/°C drift (quad version in the OPA2188 family)
OPA4350
Texas Instruments
Quad high-speed, single-supply, rail-to-rail input/output CMOS operational amplifier with 38 MHz bandwidth and 22 V/µs slew rate, optimized for low-voltage operation and driving A/D converters.
OPA4376
Texas Instruments
Quad low-noise, low quiescent current, rail-to-rail input/output precision operational amplifier with e-trim, 5.5 MHz GBW and 7.5 nV/√Hz noise, in a TSSOP-14 package.
OPA4376-Q1
Texas Instruments
Automotive-qualified quad low-noise, low quiescent current, rail-to-rail input/output precision op amp with e-trim, 5.5 MHz GBW, offered in TSSOP-14
OPA4376AIPW
Texas Instruments
Operational Amplifiers - Op Amps Precision Lo Noise L o Quiescent Current A 595-OPA4376AIPWR
OPA4376AIPWR
Texas Instruments
IC OPAMP GP 4 CIRCUIT 14TSSOP
OPA836
Texas Instruments
Single-channel ultra-low-power (1mA), rail-to-rail output, negative-rail input voltage-feedback operational amplifier with 205MHz bandwidth, operating from 2.5V to 5.5V
OPA836DBV
Texas Instruments
Ultra-low power, rail-to-rail output, negative-rail input, voltage feedback (VFB) operational amplifier with 205MHz bandwidth.
OPA836I
Texas Instruments
Single-channel, ultra-low-power (1mA), 205MHz unity-gain bandwidth, rail-to-rail output, negative-rail input voltage-feedback operational amplifier operating from 2.5V to 5.5V with power-down mode
OPA836IDBVR
Texas Instruments
Very Low Power, Rail to Rail out, Negative Rail in, VFB Op Amp 6-SOT-23 -40 to 125
OPA836IDBVT
Texas Instruments
Single-channel ultra-low-power, rail-to-rail output, negative-rail input, voltage-feedback op amp with 205MHz bandwidth and 1mA quiescent current, operating from 2.5V to 5.5V
OPA836IRUN
Texas Instruments
Single-channel ultra-low-power (1mA), 205MHz bandwidth, rail-to-rail output, negative-rail input voltage-feedback op amp with integrated gain-setting resistors in the RUN package
OPA836IRUNR
Texas Instruments
Single-channel ultra-low-power, rail-to-rail output, negative-rail input voltage-feedback op amp with 205MHz bandwidth and 1mA quiescent current; the RUN package option includes integrated gain-setting resistors.
OPA836IRUNT
Texas Instruments
Single-channel ultra-low-power, rail-to-rail output, negative-rail input voltage-feedback operational amplifier with 205MHz bandwidth and integrated gain-setting resistors in the RUN package
OPAX188
Texas Instruments
Dual 36V zero-drift, low-noise, rail-to-rail output operational amplifier with 25 μV max offset, 2 MHz gain bandwidth, and RFI-filtered inputs for precision sensor and bridge applications.
OPAX350
Texas Instruments
High-speed (38 MHz GBW, 22 V/µs), low-noise (5 nV/√Hz) single-supply rail-to-rail input/output CMOS op amp; the OPAx350 family includes single (OPA350), dual (OPA2350) and quad (OPA4350) versions.
OPAX365
Texas Instruments
50-MHz, zero-crossover, low-distortion, high-CMRR, rail-to-rail input/output, single-supply CMOS operational amplifier family (OPA365 single, OPA2365 dual) for 2.2-V to 5.5-V operation
OPAX376
Texas Instruments
Family of low-noise, low quiescent current, rail-to-rail input/output precision op amps with e-trim, 5.5 MHz GBW, covering single (OPA376), dual (OPA2376) and quad (OPA4376) versions.
OPT3001
Texas Instruments
Single-chip digital lux meter with human-eye spectral response and >99% IR rejection, measuring 0.01 to 83k lux with automatic full-scale ranging over an I2C/SMBus interface
OPT3001-Q1
Texas Instruments
OPT3001DNPR
Texas Instruments
OPT3001DNPR.A
Texas Instruments
OPT3001DNPT
Texas Instruments
PCA9306
Texas Instruments
Dual bidirectional I2C/SMBus voltage-level translator with enable input, translating between 1.2 V and 5 V with no direction pin and low 3.5-ohm ON-state resistance.
PCA9306-Q1
Texas Instruments
Automotive-qualified (Q1) version of the PCA9306 dual bidirectional I2C bus and SMBus voltage-level translator with enable input, translating between 1.2V and 5V without a direction pin.
PCA9306DCTR
Texas Instruments
IC XLTR VL BIDIR SM8
PCA9306DCTT
Texas Instruments
Dual bidirectional I2C bus and SMBus voltage-level translator with enable input, translating between 1.2 V and 5 V without a direction pin
PCA9306DCUR
Texas Instruments
Dual bidirectional I2C bus and SMBus voltage-level translator with enable input, translating between 1.2 V and 5 V without a direction pin.
PCA9306DCUT
Texas Instruments
Dual bidirectional I2C and SMBus voltage-level translator with enable input, translating between 1.2 V and 5 V without a direction pin