OPA4376

Low-Noise, Low Quiescent Current, Precision Operational Amplifier *e-trim*™ Series

Manufacturer

Texas Instruments

Overview

Part: OPA376, OPA2376, OPA4376 from Texas Instruments

Type: Precision Operational Amplifier

Key Specs:

  • Low Noise: 7.5nV/√Hz at 1kHz
  • 0.1Hz to 10Hz Noise: 0.8uVpp
  • Quiescent Current: 760μA (typ)
  • Low Offset Voltage: 5μV (typ)
  • Gain Bandwidth Product: 5.5MHz
  • Supply Voltage: 2.2V to 5.5V

Features:

  • Rail-to-Rail Input and Output
  • Single-Supply Operation
  • Space-saving packages
  • e-trim™ technology
  • Operation from -40°C to +125°C

Applications:

  • ADC Buffer
  • Audio Equipment
  • Medical Instrumentation
  • Handheld Test Equipment
  • Active Filtering
  • Sensor Signal Conditioning

Package:

  • SC-70
  • SOT23
  • WCSP
  • MSOP
  • TSSOP
  • SO-8

Features

LOW NOISE: 7.5nV/√Hz at 1kHz 0.1Hz TO 10Hz NOISE: 0.8uVpp

QUIESCENT CURRENT: 760μA (typ) LOW OFFSET VOLTAGE: 5μV (typ) GAIN BANDWIDTH PRODUCT: 5.5MHz

RAIL-TO-RAIL INPUT AND OUTPUT

SINGLE-SUPPLY OPERATION

• SUPPLY VOLTAGE: 2.2V to 5.5V

SPACE-SAVING PACKAGES:

  • SC-70, SOT23, WCSP, MSOP, TSSOP

Applications

  • ADC BUFFER
  • AUDIO EQUIPMENT
  • MEDICAL INSTRUMENTATION
  • HANDHELD TEST EQUIPMENT
  • ACTIVE FILTERING
  • SENSOR SIGNAL CONDITIONING

Pin Configuration

NOTE: (1) NC denotes no internal connection.

Electrical Characteristics

Boldface limits apply over the specified temperature range: TA = –40°C to +125°C.

At TA = +25°C, RL = 10kΩ connected to VS/2, VCM = VS/2, and VO UT = VS/2, unless otherwise noted.

PARAMETERSOPA376, OPA2376, OPA4376
CONDITIONSMIN
OFFSET VOLTAGE
Input Offset VoltageVOS
vs TemperaturedVOS/dT–40°C to +85°C
–40°C to +125°C
vs Power SupplyPSRRVS = +2.2V to +5.5V, VCM < (V+) – 1.3V
Over TemperatureVS = +2.2V to +5.5V, VCM < (V+) – 1.3V
Channel Separation, dc (dual, quad)
INPUT BIAS CURRENT
Input Bias CurrentIB
Over Temperature
Input Offset CurrentIOS
NOISE
Input Voltage Noise, f = 0.1Hz to 10Hz
Input Voltage Noise Density, f = 1kHzen
Input Current Noise, f = 1kHzin
INPUT VOLTAGE RANGE
Common-Mode Voltage RangeVCM(V–) – 0.1
Common-Mode Rejection RatioCMRR(V–) < VCM < (V+) – 1.3 V76
INPUT CAPACITANCE
Differential
Common-Mode
OPEN-LOOP GAIN
Open-Loop Voltage GainAOL50mV < VO < (V+) – 50mV, RL = 10kΩ120
100mV < VO < (V+) – 100mV, RL = 2kΩ120
FREQUENCY RESPONSECL = 100pF, VS = 5.5V
Gain-Bandwidth ProductGBW
Slew RateSRG = +1
Settling Time 0.1%tS2V Step , G = +1
Settling Time 0.01%tS2V Step , G = +1
Overload Recovery TimeVIN × Gain > VS
THD + NoiseTHD+NVO = 1VRMS, G = +1, f = 1kHz, RL = 10kΩ
OUTPUT
Voltage Output Swing from Rail(1)
RL = 10kΩ
(2)
RL = 10kΩ
Over TemperatureRL = 10kΩ
Voltage Output Swing from Rail(1)
RL = 2kΩ
(2)
RL = 2kΩ
Over TemperatureRL = 2kΩ
Short-Circuit CurrentISC
Capacitive Load DriveCLOAD
Open-Loop Output ImpedanceRO

(1) SC70-5, SOT23-5, SO-8, MSOP-8, and TSSOP-14 packages only.

(2) Wafer chip-scale package only.

Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)

OPA376, OPA2376, OPA4376UNIT
Supply VoltageVS
= (V+) – (V–)
+7V
Voltage(2)(V–) – 0.5 to (V+) + 0.5V
Signal Input TerminalsCurrent(2)±10mA
Output Short-Circuit(3)Continuous
Operating TemperatureTA–40 to +150°C
Storage TemperatureTA–65 to +150°C
Junction TemperatureTJ+150°C
Human Body Model4000V
ESD RatingCharged Device Model1000V
Machine Model200V

Related Variants

The following components are covered by the same datasheet.

Part NumberManufacturerPackage
OPA2376Texas Instruments
OPA376Texas Instruments
OPA376-Q1Texas Instruments
OPA376-Q1.HTMLTexas Instruments
OPA376AIDTexas Instruments
OPA376AIDCKRTexas InstrumentsSC-70-5
OPA376AIDG4Texas Instruments
OPA376AIDRTexas Instruments
OPAX376Texas Instruments
Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Get structured datasheet data via API

Get started free