W7500(P)-S2E
Serial to Ethernet ChipThe W7500(P)-S2E is a serial to ethernet chip from WIZnet. View the full W7500(P)-S2E datasheet below including key specifications.
W7500(P)-S2E shares its datasheet with W7500P-S2E-TR, whose page lists every part number it covers.
Official W7500(P)-S2E datasheet (PDF) — the source this page was extracted from.
W7500(P)-S2E Key Specifications
| Parameter | Value |
|---|---|
| ADC | 8 channels |
| RAM | 16KB |
| SPI | 2 |
| Core | ARM Cortex-M0 |
| GPIO | 53 |
| UART | 3 |
| Flash | 128KB |
| Ethernet | IEEE 802.3 MAC with hardwired TCP/IP stack, MII for PHY interface (W7500) |
| Debug Interface | SWD |
| Hardware Sockets | 8 channels with 32KB buffers |
| Network Protocols | TCP, UDP, IPv4, ICMP, ARP, IGMP, PPPoE |
| Package Dimensions | 7x7mm |
| Max Clock Frequency | 48MHz |
| Serial Interfaces Supported | TTL, RS-232C, RS-422/485 |
W7500(P)-S2E Overview
Part: W7500(P)-S2E — WIZnet
Type: Serial to Ethernet Chip
Description: A chip product with pre-programmed firmware for serial to Ethernet conversion, based on an ARM Cortex-M0 MCU with a hardwired TCP/IP core, supporting UART interface for network connectivity.
Operating Conditions:
- MCU Clock: Up to 48MHz
- Flash Memory: 128KB
- RAM: 16KB
Key Specs:
- CPU: ARM Cortex-M0
- Max CPU Frequency: 48MHz
- Flash Memory: 128KB
- SRAM: 16KB (for MCU)
- Hardwired TCP/IP stack
- Ethernet MAC: IEEE 802.3
- Hardware Sockets: 8 channels
- Socket Buffers: 32KB SRAM
- UART Interfaces: 3
- SPI Interfaces: 2
- ADC Channels: 8
- GPIOs: 53
Features:
- Firmware of the WIZ750SR Series
- Easy to add Ethernet networking function through UART interface
- Support TTL, RS-232C, RS-422/485 serial communication
- Configurable via Ethernet / Serial interface
- Unique MAC Address (WIZnet OUI)
- WIZnet S2E configuration tool
- WIZVSP (Virtual Serial Port) program for Windows OS
- Customization services available
Applications:
- Adding Ethernet networking to devices with UART interface
- Protocol conversion (Serial to Ethernet)
- Ethernet I/O control and monitoring
Package:
- 64 TQFP (7x7mm)
W7500(P)-S2E Features
The following key features are included with the W7500(P)-S2E product.
-
The firmware of the WIZ750SR Series, which is a verified serial to Ethernet module in the field
-
Easy to add Ethernet networking function through UART interface of any device / MCU
-
Support TTL , RS-232C and RS-422/485 serial communication
-
Configurable via Ethernet / Serial interface
-
Unique MAC Address (WIZnet OUI)
-
WIZnet S2E configuration tool
-
Product search, configuration, and firmware update via Ethernet network
-
WIZVSP program
-
WIZnet V irtual S erial P ort program for Windows OS
-
Hardware Design Guide & References
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| W7500 | WIZnet | 64 TQFP (7x7mm) |
| W7500P | WIZnet | 64-LQFP |
| W7500P-S2E-TR | WIZnet | 64 TQFP |
Other Microcontrollers (MCU)
- STM32F407VET6 – STMicroelectronics, ARM Cortex-M4 MCU
- STM32H563ZIT6 – STMicroelectronics, Arm Cortex-M33 32-bit MCU
- STM32H743VIT6 – STMicroelectronics, Microcontroller Unit (MCU)
- RP2040 – Raspberry Pi, Microcontroller
- NRF52840-QIAA-R7 – Nordic Semiconductor, Wireless Microcontroller
- STM32L011F4U6 – STMicroelectronics, Ultra-low-power Arm Cortex-M0+ MCU
- STM32U575RIT6 – STMicroelectronics, Ultra-low-power Arm Cortex-M33 32-bit MCU
- GD32F103C8T6 – GigaDevice, Arm Cortex-M3 32-bit MCU
All Microcontrollers (MCU) datasheetsAll WIZnet datasheets (6)
Ask your AI agent about the W7500(P)-S2E
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the W7500(P)-S2E run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.