MK22FN512VLH12

Part: MK22FN512VLH12 — NXP Type: ARM Cortex-M4 Microcontroller with FPU Description: 120 MHz ARM Cortex-M4 core with DSP instructions, 512 KB Flash, 128 KB RAM, USB connectivity, and low-power features.

Operating Conditions:

• Supply voltage: 1.71 to 3.6 V
• Operating temperature: -40 to 105 °C
• Max CPU frequency: 120 MHz

Absolute Maximum Ratings:

• Max supply voltage: 3.8 V
• Max continuous current: 169 mA (Digital supply current)
• Max junction/storage temperature: 150 °C

Key Specs:

• CPU Speed: 120 MHz
• Flash Memory: 512 KB
• RAM: 128 KB
• Run power consumption: down to 156 μA/MHz
• Lowest static mode power consumption: down to 140 nA
• ADC Resolution: Two 16-bit SAR ADCs
• DAC Resolution: Two 12-bit DACs
• USB VREG input voltage: -0.3 to 6 V
• Input leakage current (per pin): 0.002 μA (typ), 0.5 μA (max)

Features:

• 120 MHz Arm Cortex-M4 core with DSP instructions and FPU
• USB LS/FS OTG 2.0 with embedded 3.3 V, 120 mA LDO voltage regulator
• FlexBus external bus interface (package dependent)
• Serial programming interface (EzPort)
• Hardware CRC module and random-number generator
• Two 16-bit SAR ADCs (1.2 MS/s in 12-bit mode)
• Two 12-bit DACs (package dependent)
• Two SPI, three UART, two I2C, and I2S modules
• Up to 81 general-purpose I/O (GPIO)

Applications:

• Cost-sensitive applications requiring low-power
• Applications requiring USB connectivity
• Applications requiring processing efficiency and high peripheral integration

Package:

• 121 XFBGA (8x8x0.5mm)
• 100 LQFP (14x14x1.7mm)
• 64 LQFP (10x10x1.6mm)
• 64 MAPBGA (5x5x1.23mm)
• 88 QFN (10x10x0.9mm)

MK22FN512VLH12 Pinout

Package: 121 XFBGA (8x)

Notes

• The source datasheet table provided only a partial pinout excerpt (first 16 pins of the 121-pin XFBGA package). The complete pinout for all 121 pins is not included in the extracted section.
• Pin numbers are taken directly from the "121 XFBGA" column header in the source table.
• "—" indicates no alternate function available for that ALT slot.
• EZPORT column was present in source but contained no data for these pins; it has been omitted from the output table.

Unless otherwise specified, propagation delays are measured from the 50% to the 50% point, and rise and fall times are measured at the 20% and 80% points, as shown in the following figure.

Figure 2. Input signal measurement reference

Package dimensions are provided in package drawings.

To find a package drawing, go to nxp.com and perform a keyword search for the drawing's document number: