MCP6004T-I/SL
Quad Rail-to-Rail Op AmpThe MCP6004T-I/SL is a quad rail-to-rail op amp from Microchip Technology. View the full MCP6004T-I/SL datasheet below including key specifications, electrical characteristics, absolute maximum ratings.
MCP6004T-I/SL shares its datasheet with MCP6002, whose page lists every part number it covers.
Official MCP6004T-I/SL datasheet (PDF) — the source this page was extracted from.
Manufacturer
Microchip TechnologyCategory
Integrated CircuitsPackage
14-SOIC (0.154", 3.90mm Width)
Lifecycle
Active
MCP6004T-I/SL Key Specifications
| Parameter | Value |
|---|---|
| Amplifier Type | Standard (General Purpose) |
| Input Bias Current | 1 pA |
| Current - Output / Channel | 23 mA |
| Quiescent Current | 100µA (x4 Channels) |
| Gain Bandwidth Product | 1 MHz |
| Mounting Type | Surface Mount |
| Number of Circuits | 4 |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Output Type | Rail-to-Rail |
| Package / Case | 14-SOIC (0.154", 3.90mm Width) |
| Slew Rate | 0.6V/µs |
| Supplier Device Package | 14-SOIC |
| Input Offset Voltage | 4.5 mV |
| Supply Voltage Span (Max) | 6 V |
| Supply Voltage Span (Min) | 1.8 V |
MCP6004T-I/SL Overview
Part: Microchip Technology Inc. MCP6001/1R/1U/2/4 Family
Type: Operational Amplifier
Description: A 1 MHz, low-power operational amplifier family featuring rail-to-rail input/output, operating from a 1.8V to 6.0V supply with a typical quiescent current of 100 μA.
Operating Conditions:
- Supply voltage: 1.8V–6.0V
- Operating temperature: -40°C to +125°C
- Gain Bandwidth Product: 1 MHz (typical)
- Quiescent Current: 100 μA (typical)
Absolute Maximum Ratings:
- Max supply voltage (V DD - V SS ): 7.0V
- Max continuous current (Output and Supply Pins): ±30 mA
- Max junction/storage temperature: +150°C
Key Specs:
- Gain Bandwidth Product (GBWP): 1.0 MHz (typ)
- Quiescent Current per Amplifier (I Q ): 100 μA (typ) at I O = 0, V DD = 5.5V, V CM = 5V
- Input Offset Voltage (V OS ): ±4.5 mV (max) at V CM = V SS
- Phase Margin (PM): 90° (typ) at G = +1 V/V
- Slew Rate (SR): 0.6 V/μs (typ)
- Common-Mode Input Range (V CMR ): V SS - 0.3V to V DD + 0.3V
- DC Open-Loop Gain (A OL ): 112 dB (typ) at V OUT = 0.3V to V DD - 0.3V, V CM = V SS
Features:
- Available in 5-Lead SC-70 and 5-Lead SOT-23 Packages
- Gain Bandwidth Product: 1 MHz (typical)
- Rail-to-Rail Input/Output
- Supply Voltage: 1.8V to 6.0V
- Supply Current: I Q = 100 μA (typical)
- Phase Margin: 90° (typical)
- Temperature Range: -40°C to +125°C
- Available in Single, Dual and Quad Packages
Applications:
- Automotive
- Portable Equipment
- Photodiode Amplifier
- Analog Filters
- Notebooks and PDAs
- Battery-Powered Systems
Package:
- 5-Lead SC-70
- 5-Lead SOT-23
- 8-Lead MSOP
- 8-Lead PDIP
- 8-Lead SOIC (150 mil)
- 8-Lead 2x3 DFN
- 14-Lead PDIP
- 14-Lead SOIC
- 14-Lead TSSOP
MCP6004T-I/SL Features
- Available in 5-Lead SC-70 and 5-Lead SOT-23 Packages
- Gain Bandwidth Product: 1 MHz (typical)
- Rail-to-Rail Input/Output
·
Supply Voltage: 1.8V to 6.0V
- Supply Current: I Q = 100 μA (typical)
- Phase Margin: 90° (typical)
- Temperature Range:
- -Industrial: -40°C to +85°C
- -Extended: -40°C to +125°C
- Available in Single, Dual and Quad Packages
MCP6004T-I/SL Applications
- Automotive
- Portable Equipment
- Photodiode Amplifier
- Analog Filters
- Notebooks and PDAs
- Battery-Powered Systems
MCP6004T-I/SL Pin Configuration
Descriptions of the pins are listed in Table 3-1.
TABLE 3-1: PIN FUNCTION TABLE
| MCP6001 | MCP6001R | MCP6001U | MCP6002 | MCP6002 | MCP6004 |
|---|---|---|---|---|---|
| 5-Lead SC70, SOT-23 | 5-Lead SOT-23 | 5-Lead SOT-23 | 8-Lead MSOP, PDIP, SOIC | 8-Lead 2x3 DFN | 8-Lead PDIP,SOIC, TSSOP |
| 1 | 1 | 4 | 1 | 1 | 1 |
| 4 | 4 | 3 | 2 | 2 | 2 |
| 3 | 3 | 1 | 3 | 3 | 3 |
| 5 | 2 | 5 | 8 | 8 | 4 |
| - | - | - | 5 | 5 | 5 |
| - | - | - | 6 | 6 | 6 |
| - | - | - | 7 | 7 | 7 |
| - | - | - | - | - | 8 |
| - | - | - | - | - | 9 |
| - | - | - | - | - | 10 |
| 2 | 5 | 2 | 4 | 4 | 11 |
| - | - | - | - | - | 12 |
| - | - | - | - | - | 13 |
| - | - | - | - | - | 14 |
| - | - | - | - | 9 | - |
MCP6004T-I/SL Electrical Characteristics
| Electrical Characteristics: Unless otherwise indicated, T A = +25°C, V DD = +1.8V to +5.5V, V SS = GND, V CM = V DD /2, V L = V DD /2, R L = 10 k to V L and V OUT V DD /2 (refer to Figure 1-1). | Electrical Characteristics: Unless otherwise indicated, T A = +25°C, V DD = +1.8V to +5.5V, V SS = GND, V CM = V DD /2, V L = V DD /2, R L = 10 k to V L and V OUT V DD /2 (refer to Figure 1-1). | Electrical Characteristics: Unless otherwise indicated, T A = +25°C, V DD = +1.8V to +5.5V, V SS = GND, V CM = V DD /2, V L = V DD /2, R L = 10 k to V L and V OUT V DD /2 (refer to Figure 1-1). | Electrical Characteristics: Unless otherwise indicated, T A = +25°C, V DD = +1.8V to +5.5V, V SS = GND, V CM = V DD /2, V L = V DD /2, R L = 10 k to V L and V OUT V DD /2 (refer to Figure 1-1). | Electrical Characteristics: Unless otherwise indicated, T A = +25°C, V DD = +1.8V to +5.5V, V SS = GND, V CM = V DD /2, V L = V DD /2, R L = 10 k to V L and V OUT V DD /2 (refer to Figure 1-1). | Electrical Characteristics: Unless otherwise indicated, T A = +25°C, V DD = +1.8V to +5.5V, V SS = GND, V CM = V DD /2, V L = V DD /2, R L = 10 k to V L and V OUT V DD /2 (refer to Figure 1-1). | Electrical Characteristics: Unless otherwise indicated, T A = +25°C, V DD = +1.8V to +5.5V, V SS = GND, V CM = V DD /2, V L = V DD /2, R L = 10 k to V L and V OUT V DD /2 (refer to Figure 1-1). |
|---|---|---|---|---|---|---|
| Parameters | Sym | Min | Typ | Max | Units | Conditions |
| Input Offset | ||||||
| Input Offset Voltage | V OS | -4.5 | - | +4.5 | mV | V CM = V SS (Note 1) |
| Input Offset Drift with Temperature | V OS / T A | - | ±2.0 | - | μV/°C | T A = -40°C to +125°C, V CM = V SS |
| Power Supply Rejection Ratio | PSRR | - | 86 | - | dB | V CM = V SS |
| Input Bias Current and Impedance | ||||||
| Input Bias Current: | I B | - | ±1.0 | - | pA | |
| Industrial Temperature | I B | - | 19 | - | pA | T A = +85°C |
| Extended Temperature | I B | - | 1100 | - | pA | T A = +125°C |
| Input Offset Current | I OS | - | ±1.0 | - | pA | |
| Common-Mode Input Impedance | Z CM | - | 10 13 \ | \ | 6 | - |
| Differential Input Impedance | Z DIFF | - | 10 13 \ | \ | 3 | - |
| Common-Mode | ||||||
| Common-Mode Input Range | V CMR | V SS - 0.3 | - | V DD + 0.3 | V | |
| Common-Mode Rejection Ratio | CMRR | 60 | 76 | - | dB | V CM = -0.3V to 5.3V, V DD = 5V |
| Open-Loop Gain | ||||||
| DC Open-Loop Gain (Large Signal) | A OL | 88 | 112 | - | dB | V OUT = 0.3V to V DD - 0.3V, V CM = V SS |
| Output | ||||||
| Maximum Output Voltage Swing | V OL , V OH | V SS + 25 | - | V DD - 25 | mV | V DD = 5.5V, 0.5V input overdrive |
| Output Short-Circuit Current | I SC | - - | ±6 ±23 | - - | mA mA | V DD = 1.8V V DD = 5.5V |
| Power Supply | ||||||
| Supply Voltage | V DD | 1.8 | - | 6.0 | V | Note 2 |
| Quiescent Current per Amplifier | I Q | 50 | 100 | 170 | μA | I O = 0, V DD = 5.5V, V CM = 5V |
-
2: All parts with date codes November 2007 and later have been screened to ensure operation at V DD = 6.0V. However, the other minimum and maximum specifications are measured at 1.8V and 5.5V.
-
† Notice: Stresses above those listed under 'Absolute Maximum Ratings' may cause permanent damage to the device. This is a stress rating only and functional operation of the device at those or any other conditions above those indicated in the operational listings of this specification is not implied. Exposure to maximum rating conditions for extended periods may affect device reliability.
-
†† See Section 4.1.2 'Input Voltage and Current Limits' .
MCP6004T-I/SL Absolute Maximum Ratings
- Current at Analog Input Pins (V IN +, V IN -)......................±2 mA
- Analog Inputs (V IN +, V IN -) †† .......... V SS - 1.0V to V DD + 1.0V
- All Other Inputs and Outputs ......... V SS - 0.3V to V DD + 0.3V
- Difference Input Voltage ...................................... \
- Output Short-Circuit Current ................................Continuous
- Current at Output and Supply Pins ............................±30 mA
- Storage Temperature ....................................-65°C to +150°C
- Maximum Junction Temperature (T J )..........................+150°C
- ESD Protection On All Pins (HBM; MM) 4 kV; 200V
MCP6004T-I/SL Thermal Information
There is an internal electrical connection between the Exposed Thermal Pad (EP) and the V SS pin; they must be connected to the same potential on the Printed Circuit Board (PCB).
NOTES:
MCP6004T-I/SL Typical Application
Variants on the same datasheet
These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.
| Part Number | Manufacturer | Package |
|---|---|---|
| MCP6002 | Microchip Technology | — |
Other Integrated Circuits
- STM32F103C8T6 – STMicroelectronics, Microcontroller
- STM32F405RGT6 – STMicroelectronics, ARM Cortex-M4 MCU
- SN74AVC4T245PWR – Texas Instruments, Dual-Supply Bus Transceiver Level Translator
- STM32F446RCT6 – STMicroelectronics, ARM Cortex-M4 MCU
- STM32G070RBT6 – STMicroelectronics, Arm Cortex-M0+ 32-bit MCU
- ADS131M08IPBSR – Texas Instruments, Delta-Sigma ADC
- ISO1540DR – Texas Instruments, Bidirectional I²C Isolator
- ISO7740DBQR – Texas Instruments, Digital Isolator
All Integrated Circuits datasheetsAll Microchip Technology datasheets (599)
Ask your AI agent about the MCP6004T-I/SL
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the MCP6004T-I/SL run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.