MCP6002

Part: Microchip Technology Inc. MCP6001/2/4

Type: Operational Amplifier

Key Specs:

• Gain Bandwidth Product: 1 MHz (typical)
• Supply Voltage: 1.8V to 6.0V
• Supply Current: 100 μA (typical)
• Phase Margin: 90° (typical)
• Industrial Temperature Range: -40°C to +85°C
• Extended Temperature Range: -40°C to +125°C
• Slew Rate: 0.6 V/µs (typical)
• Input Noise Voltage Density: 28 nV/√Hz (typical)

Features:

• Available in 5-Lead SC-70 and 5-Lead SOT-23 Packages
• Rail-to-Rail Input/Output
• Available in Single, Dual and Quad Packages
• Maintains 45° phase margin (typical) with a 500 pF capacitive load
• Common-mode input voltage range of VDD + 300 mV to VSS – 300 mV
• Designed with Microchip's advanced CMOS process

Applications:

• Automotive
• Portable Equipment
• Photodiode Amplifier
• Analog Filters
• Notebooks and PDAs
• Battery-Powered Systems

Package:

• 5-Lead SC-70: dimensions not specified
• 5-Lead SOT-23: dimensions not specified

• Available in 5-Lead SC-70 and 5-Lead SOT-23 Packages
• Gain Bandwidth Product: 1 MHz (typical)
• Rail-to-Rail Input/Output
• Supply Voltage: 1.8V to 6.0V
• Supply Current: I_Q = 100 μA (typical)
• Phase Margin: 90° (typical)
• · Temperature Range:
  • Industrial: -40°C to +85°C
  • Extended: -40°C to +125°C
• · Available in Single, Dual and Quad Packages

• Automotive
• · Portable Equipment
• · Photodiode Amplifier
• · Analog Filters
• · Notebooks and PDAs
• Battery-Powered Systems

Design Aids

• · SPICE Macro Models
• FilterLab^® Software
• Mindi™ Circuit Designer and Analog Simulator
• Microchip Advanced Part Selector (MAPS)
• Analog Demonstration and Evaluation Boards
• · Application Notes

Typical Application

Description

The Microchip Technology Inc. MCP6001/2/4 family of operational amplifiers (op amps) is specifically designed for general purpose applications. This family has a 1 MHz Gain Bandwidth Product (GBWP) and 90° phase margin (typical). It also maintains a 45° phase margin (typical) with a 500 pF capacitive load. This family operates from a single-supply voltage as low as 1.8V, while drawing 100 $\mu A$ (typical) quiescent current. Additionally, the MCP6001/2/4 supports rail-to-rail input and output swing, with a Common-mode input voltage range of $V_{DD}$ + 300 mV to $V_{SS}$ – 300 mV. This family of op amps is designed with Microchip's advanced CMOS process.

The MCP6001/2/4 family is available in the industrial and extended temperature ranges, with a power supply range of 1.8V to 6.0V.

Package Types

NOTES:

Descriptions of the pins are listed in Table 3-1.

TABLE 3-1: PIN FUNCTION TABLE

Absolute Maximum Ratings†

• † Notice: Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at those or any other conditions above those indicated in the operational listings of this specification is not implied. Exposure to maximum rating conditions for extended periods may affect device reliability.
• †† See Section 4.1.2 "Input Voltage and Current Limits".

• † Notice: Stresses above those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at those or any other conditions above those indicated in the operational listings of this specification is not implied. Exposure to maximum rating conditions for extended periods may affect device reliability.
• †† See Section 4.1.2 "Input Voltage and Current Limits".

There is an internal electrical connection between the Exposed Thermal Pad (EP) and the $V_{SS}$ pin; they must be connected to the same potential on the Printed Circuit Board (PCB).

NOTES: