NE5532
Dual Operational AmplifierThe NE5532 is a dual operational amplifier from Texas Instruments. View the full NE5532 datasheet below including key specifications, pinout, electrical characteristics, absolute maximum ratings.
Official NE5532 datasheet (PDF) — the source this page was extracted from.
NE5532 Key Specifications
| Parameter | Value |
|---|---|
| CMRR | 100dB typ (70dB min) |
| PSRR | 100dB typ (80dB min) |
| Slew Rate | 8V/µs typ (6V/µs min) |
| Supply Current | 6.0mA typ, 16mA max |
| Input Resistance | 300kΩ typ (30kΩ min) |
| Power Dissipation | 1000mW max |
| Input Bias Current | 200nA typ, 800nA max |
| Input Noise Voltage | 8nV/√Hz at 30Hz, 5nV/√Hz at 1kHz |
| Input Voltage Range | ±13V typ (±12V min) |
| Full Power Bandwidth | 140kHz |
| Input Offset Current | 10nA typ, 150nA max |
| Input Offset Voltage | 0.5mV typ, 4mV max |
| Output Voltage Swing | ±13V typ (±12V min) at RL ≥ 600Ω |
| Supply Voltage (Max) | ±22V |
| Operating Temperature | 0°C to +70°C |
| Short Circuit Current | 38mA typ |
| Gain Bandwidth Product | 10MHz typ (8MHz min) |
| Differential Input Voltage (Max) | 13V |
NE5532 Overview
Part: NE5532 Fairchild Semiconductor
Type: Dual Operational Amplifier
Description: Dual low noise operational amplifier with 8 nV/√Hz input noise voltage, 8 V/μs slew rate, and 140 KHz full power bandwidth, suitable for high quality amplifier and control circuit applications.
Operating Conditions:
- Supply voltage: Up to ±22 V
- Operating temperature: 0 to +70 °C
- Full power bandwidth: 140 KHz
Absolute Maximum Ratings:
- Max supply voltage: ±22 V
- Max continuous current: 38 mA (Short Circuit Current)
- Max operating temperature: +70 °C
Key Specs:
- Input Offset Voltage: 0.5 mV (Typ), 4 mV (Max)
- Input Bias Current: 200 nA (Typ), 800 nA (Max)
- Supply Current: 6.0 mA (Typ), 16 mA (Max)
- Input Noise Voltage: 8.0 nV/√Hz (Typ, fo = 30Hz); 5.0 nV/√Hz (Typ, fo = 1KHz)
- Slew Rate: 8.0 V/μs (Typ, RL=1K, CL=100pF, RL=600Ω)
- Gain Bandwidth Product: 10 MHz (Typ, CL=100pF, RL=600Ω)
- Common Mode Rejection Ratio (CMRR): 100 dB (Typ, TA = 25 °C)
- Output Voltage Swing: ±13 V (Typ, RL ≥ 600 Ω)
Features:
- Internal frequency compensation
- Input noise voltage: 8nV/√Hz (fo = 30Hz)
- Slew Rate: 8V/μs
- Full power bandwidth: 140KHz
Applications:
- High quality AMP
- All control circuits
- Telephone applications
Package:
- 8 DIP
NE5532 Pin Configuration
NE5532 Pinout — 8-pin DIP
| Pin Number | Pin Name | Type | Description |
|---|---|---|---|
| 1 | OUT1 | O | Output 1 (Amplifier 1) |
| 2 | IN1(−) | I | Inverting Input 1 (Amplifier 1) |
| 3 | IN1(+) | I | Non-Inverting Input 1 (Amplifier 1) |
| 4 | GND | P | Ground |
| 5 | IN2(+) | I | Non-Inverting Input 2 (Amplifier 2) |
| 6 | IN2(−) | I | Inverting Input 2 (Amplifier 2) |
| 7 | OUT2 | O | Output 2 (Amplifier 2) |
| 8 | VCC | P | Positive Supply Voltage |
Notes
- Dual Op-Amp: The NE5532 contains two independent operational amplifiers (Amplifier 1 and Amplifier 2).
- Supply Voltage: Typical dual supply operation is VCC = +5V to +22V and VEE (GND) = −5V to −22V. Single supply operation is also possible.
- Pin 4 (GND): Serves as the negative supply reference (VEE) in dual-supply configurations.
- Low Noise: Input noise voltage is 8 nV/√Hz at 30 Hz, making this suitable for audio and precision applications.
- Slew Rate: 8 V/μs typical, supporting high-speed signal processing.
NE5532 Electrical Characteristics
| Characteristic | Symbol | Test Conditions | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Input Offset Voltage | V IO | 0.5 | 4 | mV | ||
| Input Offset Current | I IO | 10 | 150 | nA | ||
| Input Bias Current | I BIAS | 200 | 800 | nA | ||
| Supply Current | I CC | 6.0 | 16 | mA | ||
| Input Voltage Range | V I(R) | ± 12 | ± 13 | V | ||
| Common Mode Rejection Range | CMRR | T A = 25 ° C | 70 | 100 | dB | |
| Power Supply Rejection Ratio | PSRR | T A = 25 ° C | 80 | 100 | dB | |
| Output Voltage Swing | V O(P.P) | R L ≥ 600 Ω | ± 12 | ± 13 | V | |
| Input Resistance | R I | T A = 25 ° C | 30 | 300 | K Ω | |
| Short Circuit Current | I SC | 38 | mA | |||
| Overshoot | O S | R L =600 Ω , C L =100pF | 10 | 20 | % | |
| Gain | G V | f = 10KHz | 2 | 2.2 | V/mV | |
| Gain Bandwidth Product | GBW | C L =100pF, R L = 600 Ω | 8 | 10 | MHz | |
| Slew Rate | SR | R L =1K, C L =100pF,R L =600 Ω | 6 | 8.0 | V/us | |
| Input Noise Voltage | V NI | f O = 30Hz f O = 1KHz | 8.0 5.0 | nV/ Hz |
Rev. B
NE5532 Absolute Maximum Ratings
| Characteristics | Symbol | NE5532 | Unit |
|---|---|---|---|
| Power Supply Voltage | V CC | ± 22 | V |
| Differential Input Voltage | V IO | 13 | V |
| Input Voltage | V I | Supply Voltage | V |
| Power Dissipation | P D | 1000 | mW |
| Operating Temperature Range | T OPR | 0 ~ + 70 | ° C |
Other Operational Amplifiers
- LM358 – onsemi, Dual Operational Amplifier
- AD623A – Analog Devices, Rail-to-Rail Instrumentation Amplifier
- AD623ARMZ-REEL7 – Analog Devices, Rail-to-Rail Instrumentation Amplifier
- AD623ARZ – Analog Devices, Rail-to-Rail Instrumentation Amplifier
- AD623ARZ-RL – Analog Devices, Rail-to-Rail Instrumentation Amplifier
- AD623B – Analog Devices, Rail-to-Rail Instrumentation Amplifier
- AD623BNZ – Analog Devices, Rail-to-Rail Instrumentation Amplifier
- AD623BRZ-R7 – Analog Devices, Rail-to-Rail Instrumentation Amplifier
All Operational Amplifiers datasheetsAll Texas Instruments datasheets (2,442)
Ask your AI agent about the NE5532
Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.
claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp
Then ask: "Can the NE5532 run from my 12 V rail? Check it against the datasheet limits."
Create a free account $2 of usage every month, no card needed.