Skip to main content

MCP6002T-I/MS

Operational Amplifier

The MCP6002T-I/MS is a operational amplifier from Microchip Technology. View the full MCP6002T-I/MS datasheet below including electrical characteristics, absolute maximum ratings.

Manufacturer

Microchip Technology

Category

Operational Amplifiers

Overview

Part: Microchip Technology Inc. MCP6001/1R/1U/2/4 Family

Type: Operational Amplifier

Description: A 1 MHz, low-power operational amplifier family featuring rail-to-rail input/output, operating from a 1.8V to 6.0V supply with a typical quiescent current of 100 μA.

Operating Conditions:

  • Supply voltage: 1.8V–6.0V
  • Operating temperature: -40°C to +125°C
  • Gain Bandwidth Product: 1 MHz (typical)
  • Quiescent Current: 100 μA (typical)

Absolute Maximum Ratings:

  • Max supply voltage (V DD - V SS ): 7.0V
  • Max continuous current (Output and Supply Pins): ±30 mA
  • Max junction/storage temperature: +150°C

Key Specs:

  • Gain Bandwidth Product (GBWP): 1.0 MHz (typ)
  • Quiescent Current per Amplifier (I Q ): 100 μA (typ) at I O = 0, V DD = 5.5V, V CM = 5V
  • Input Offset Voltage (V OS ): ±4.5 mV (max) at V CM = V SS
  • Phase Margin (PM): 90° (typ) at G = +1 V/V
  • Slew Rate (SR): 0.6 V/μs (typ)
  • Common-Mode Input Range (V CMR ): V SS - 0.3V to V DD + 0.3V
  • DC Open-Loop Gain (A OL ): 112 dB (typ) at V OUT = 0.3V to V DD - 0.3V, V CM = V SS

Features:

  • Available in 5-Lead SC-70 and 5-Lead SOT-23 Packages
  • Gain Bandwidth Product: 1 MHz (typical)
  • Rail-to-Rail Input/Output
  • Supply Voltage: 1.8V to 6.0V
  • Supply Current: I Q = 100 μA (typical)
  • Phase Margin: 90° (typical)
  • Temperature Range: -40°C to +125°C
  • Available in Single, Dual and Quad Packages

Applications:

  • Automotive
  • Portable Equipment
  • Photodiode Amplifier
  • Analog Filters
  • Notebooks and PDAs
  • Battery-Powered Systems

Package:

  • 5-Lead SC-70
  • 5-Lead SOT-23
  • 8-Lead MSOP
  • 8-Lead PDIP
  • 8-Lead SOIC (150 mil)
  • 8-Lead 2x3 DFN
  • 14-Lead PDIP
  • 14-Lead SOIC
  • 14-Lead TSSOP

Features

  • Available in 5-Lead SC-70 and 5-Lead SOT-23 Packages
  • Gain Bandwidth Product: 1 MHz (typical)
  • Rail-to-Rail Input/Output

·

Supply Voltage: 1.8V to 6.0V

  • Supply Current: I Q = 100 μA (typical)
  • Phase Margin: 90° (typical)
  • Temperature Range:
  • -Industrial: -40°C to +85°C
  • -Extended: -40°C to +125°C
  • Available in Single, Dual and Quad Packages

Applications

  • Automotive
  • Portable Equipment
  • Photodiode Amplifier
  • Analog Filters
  • Notebooks and PDAs
  • Battery-Powered Systems

Pin Configuration

Descriptions of the pins are listed in Table 3-1.

TABLE 3-1: PIN FUNCTION TABLE

MCP6001MCP6001RMCP6001UMCP6002MCP6002MCP6004
5-Lead SC70, SOT-235-Lead SOT-235-Lead SOT-238-Lead MSOP, PDIP, SOIC8-Lead 2x3 DFN8-Lead PDIP,SOIC, TSSOP
114111
443222
331333
525884
---555
---666
---777
-----8
-----9
-----10
2524411
-----12
-----13
-----14
----9-

Electrical Characteristics

Electrical Characteristics: Unless otherwise indicated, T A = +25°C, V DD = +1.8V to +5.5V, V SS = GND, V CM = V DD /2, V L = V DD /2, R L = 10 k  to V L and V OUT  V DD /2 (refer to Figure 1-1).Electrical Characteristics: Unless otherwise indicated, T A = +25°C, V DD = +1.8V to +5.5V, V SS = GND, V CM = V DD /2, V L = V DD /2, R L = 10 k  to V L and V OUT  V DD /2 (refer to Figure 1-1).Electrical Characteristics: Unless otherwise indicated, T A = +25°C, V DD = +1.8V to +5.5V, V SS = GND, V CM = V DD /2, V L = V DD /2, R L = 10 k  to V L and V OUT  V DD /2 (refer to Figure 1-1).Electrical Characteristics: Unless otherwise indicated, T A = +25°C, V DD = +1.8V to +5.5V, V SS = GND, V CM = V DD /2, V L = V DD /2, R L = 10 k  to V L and V OUT  V DD /2 (refer to Figure 1-1).Electrical Characteristics: Unless otherwise indicated, T A = +25°C, V DD = +1.8V to +5.5V, V SS = GND, V CM = V DD /2, V L = V DD /2, R L = 10 k  to V L and V OUT  V DD /2 (refer to Figure 1-1).Electrical Characteristics: Unless otherwise indicated, T A = +25°C, V DD = +1.8V to +5.5V, V SS = GND, V CM = V DD /2, V L = V DD /2, R L = 10 k  to V L and V OUT  V DD /2 (refer to Figure 1-1).Electrical Characteristics: Unless otherwise indicated, T A = +25°C, V DD = +1.8V to +5.5V, V SS = GND, V CM = V DD /2, V L = V DD /2, R L = 10 k  to V L and V OUT  V DD /2 (refer to Figure 1-1).
ParametersSymMinTypMaxUnitsConditions
Input Offset
Input Offset VoltageV OS-4.5-+4.5mVV CM = V SS (Note 1)
Input Offset Drift with Temperature V OS /  T A-±2.0-μV/°CT A = -40°C to +125°C, V CM = V SS
Power Supply Rejection RatioPSRR-86-dBV CM = V SS
Input Bias Current and Impedance
Input Bias Current:I B-±1.0-pA
Industrial TemperatureI B-19-pAT A = +85°C
Extended TemperatureI B-1100-pAT A = +125°C
Input Offset CurrentI OS-±1.0-pA
Common-Mode Input ImpedanceZ CM-10 13 ||6- ||pF
Differential Input ImpedanceZ DIFF-10 13 ||3- ||pF
Common-Mode
Common-Mode Input RangeV CMRV SS -  0.3-V DD + 0.3V
Common-Mode Rejection RatioCMRR6076-dBV CM = -0.3V to 5.3V, V DD = 5V
Open-Loop Gain
DC Open-Loop Gain (Large Signal)A OL88112-dBV OUT = 0.3V to V DD - 0.3V, V CM = V SS
Output
Maximum Output Voltage SwingV OL , V OHV SS + 25-V DD - 25mVV DD = 5.5V, 0.5V input overdrive
Output Short-Circuit CurrentI SC- -±6 ±23- -mA mAV DD = 1.8V V DD = 5.5V
Power Supply
Supply VoltageV DD1.8-6.0VNote 2
Quiescent Current per AmplifierI Q50100170μAI O = 0, V DD = 5.5V, V CM = 5V
  • 2: All parts with date codes November 2007 and later have been screened to ensure operation at V DD = 6.0V. However, the other minimum and maximum specifications are measured at 1.8V and 5.5V.

Absolute Maximum Ratings

  • Current at Analog Input Pins (V IN +, V IN -)......................±2 mA
  • Analog Inputs (V IN +, V IN -) †† .......... V SS - 1.0V to V DD + 1.0V
  • All Other Inputs and Outputs ......... V SS - 0.3V to V DD + 0.3V
  • Difference Input Voltage ...................................... |V DD - V SS |
  • Output Short-Circuit Current ................................Continuous
  • Current at Output and Supply Pins ............................±30 mA
  • Storage Temperature ....................................-65°C to +150°C
  • Maximum Junction Temperature (T J )..........................+150°C
  • ESD Protection On All Pins (HBM; MM)   4 kV; 200V

Thermal Information

There is an internal electrical connection between the Exposed Thermal Pad (EP) and the V SS pin; they must be connected to the same potential on the Printed Circuit Board (PCB).

NOTES:

Typical Application

Package Information

UnitsMILLIMETERSMILLIMETERSMILLIMETERS
Dimension LimitsDimension LimitsMINNOMMAX
Contact PitchE0.65 BSC
Contact Pad SpacingC2.20
Contact Pad WidthX0.45
Contact Pad LengthY0.95
Distance Between PadsG1.25
Distance Between PadsGx0.20

Related Variants

The following components are covered by the same datasheet.

Part NumberManufacturerPackage
MCP6002Microchip Technology—
MCP6002-E/MCMicrochip Technology—
MCP6002-E/PMicrochip Technology—
MCP6002-I/MSMicrochip Technology—
MCP6002-I/PMicrochip Technology—
MCP6002-I/SNMicrochip Technology—
MCP6002TMicrochip Technology—
MCP6002T-E/MCMicrochip Technology—
Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Get structured datasheet data via API

Get started free