LMV358DR2G
The LMV358DR2G is an electronic component from Texas Instruments. View the full LMV358DR2G datasheet below including electrical characteristics, absolute maximum ratings.
Manufacturer
Texas Instruments
Category
Integrated Circuits (ICs)
Overview
Part: LMV358IDR — onsemi
Type: Dual Low-Voltage, Rail-to-Rail Operational Amplifier
Description: Dual low-voltage operational amplifier with rail-to-rail output swing, operating from 2.7 V to 5.0 V single-sided power supply, featuring low quiescent current and no output crossover distortion.
Operating Conditions:
- Supply voltage: 2.7–5.0 V
- Operating temperature: -40 to +125 °C
- Common mode input range includes ground
Absolute Maximum Ratings:
- Max supply voltage: 5.5 V
- Max input current: 10 mA
- Max junction temperature: 150 °C
Features
- LMV321 Single Available in Ultra Small 5 Pin SC70 Package
- Operation from 2.7 V to 5.0 V Single -Sided Power Supply
- No Output Crossover Distortion
- Low Quiescent Current: LMV358 Dual -220 m A, Max per Channel
- Rail -to -Rail Output
- No Output Phase -Reversal from Overdriven Input
- These Devices are Pb -Free, Halogen Free/BFR Free and are RoHS Compliant
- NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC -Q100 Qualified and PPAP Capable
Applications
- Portable Battery -Operated Instruments
- Notebook Computers and PDA's
- Active Filters
Electrical Characteristics
| Parameter | Symbol | Condition | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Gain Bandwidth Product | GBWP | C L = 200 pF | 1 | MHz | ||
| Phase Margin | Q m | 60 | ° | |||
| Gain Margin | G m | 10 | dB | |||
| Input - Referred Voltage Noise | e n | f = 50 kHz | 50 | nV/ √ Hz |
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions.
- For LMV321, LMV358, LMV324: T A = -40 C to +85 C For LMV321I, LMV358I, NCV321: T A = -40 ° C to +125 ° C.
° °
- Guaranteed by design and/or characterization.
5.0 V DC ELECTRICAL CHARACTERISTICS (Unless otherwise specified, all limits are guaranteed for T A = 25 ° C, V + = 5.0 V, RL = 1 M W , V -= 0 V, V O = V+/2)
| Parameter | Symbol | Condition | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Input Offset Voltage | V IO | T A = T Low to T High (Note 6) | 1.7 | 9 | mV | |
| Input Offset Voltage Average Drift | T C V IO | T A = T Low to T High (Note 6) | 5 | m V/ ° C | ||
| Input Bias Current (Note 7) | I B | T A = T Low to T High (Note 6) | < 1 | nA | ||
| Input Offset Current (Note 7) | I IO | T A = T Low to T High (Note 6) | < 1 | nA | ||
| Common Mode Rejection Ratio | CMRR | 0 V v V CM v 4 V | 50 | 65 | dB | |
| Power Supply Rejection Ratio | PSRR | 2.7 V v V+ v 5 V, V O = 1 V, V CM = 1 V | 50 | 60 | dB | |
| Input Common - Mode Voltage Range | V CM | For CMRR w 50 dB | 0 to 4 | - 0.2 to 4.2 | V | |
| Large Signal Voltage Gain (Note 7) | A V | R L = 2 k W | 15 | 100 | V/mV | |
| Output Swing | T A = T Low to T High (Note 6) | 10 | V/mV | |||
| V OH | R L = 2 k W to 2.5 V T A = T Low to T High (Note 6) | V CC - 300 V CC - 400 | V CC - 40 | mV | ||
| V OL | R L = 2 k W to 2.5 V (Note 7) T A = T Low to T High (Note 6) | 120 | 300 400 | mV | ||
| V OH | R L = 10 k W to 2.5 V (Note 7) T A = T Low to T High (Note 6) | V CC - 100 V CC - 200 | mV | |||
| V OL | R L = 10 k W to 2.5 V T A = T Low to T High (Note 6) | 65 | 180 280 | mV | ||
| Output Short Circuit Current | I O | Sourcing = V O = 0 V (Note 7) Sinking = V O = 5 V (Note 7) | 10 10 | 60 160 | mA | |
| Supply Current | I CC | LMV321 T A = T Low to T High (Note 6) | 130 | 250 350 | m A | |
| Supply Current | NCV321 T A = T Low to T High (Note 6) | 130 | 250 350 | m A | ||
| Supply Current | LMV358/358I Both Amplifiers T A = T Low to T High (Note 6) | 210 | 440 615 | m A | ||
| Supply Current | LMV324 All Four Amplifiers T A = T Low to T High (Note 6) | 410 | 830 1160 | m A |
5.0 V AC ELECTRICAL CHARACTERISTICS (Unless otherwise specified, all limits are guaranteed for T A = 25 ° C, V + = 5.0 V, RL = 1 M W , V -= 0 V, V O = V+/2)
| Parameter | Symbol | Condition | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Slew Rate | S R | 1 | V/ m s | |||
| Gain Bandwidth Product | GBWP | C L = 200 pF | 1 | MHz | ||
| Phase Margin | Q m | 60 | ° | |||
| Gain Margin | G m | 10 | dB | |||
| Input - Referred Voltage Noise | e n | f = 50 kHz | 50 | nV/ √ Hz |
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions.
- For LMV321, LMV358, LMV324: T A = -40 C to +85 C
For LMV321I, LMV358I, NCV321: T A = -40 C to +125 C.
° ° ° °
- Guaranteed by design and/or characterization.
(T A = 25 ° C and V S = 5 V unless otherwise specified)
(T A = 25 ° C and V S = 5 V unless otherwise specified)
(T A = 25 ° C and V S = 5 V unless otherwise specified)
(T A = 25 ° C and V S = 5 V unless otherwise specified)
Figure 19. Source Current vs. Output Voltage VS = 5.0 V
Figure 19. Source Current vs. Output Voltage VS = 5.0 V
Figure 21. Settling Time vs. Capacitive Load
Figure 23. Step Response -Small Signal
Figure 20. Settling Time vs. Capacitive Load
Figure 22. Step Response -Small Signal
Figure 24. Step Response -Large Signal
(T A = 25 ° C and V S = 5 V unless otherwise specified)
Figure 25. Step Response -Large Signal
Absolute Maximum Ratings
| Symbol | Rating | Value | Unit |
|---|---|---|---|
| V S | Supply Voltage (Operating Range V S = 2.7 V to 5.5 V) | 5.5 | V |
| V IDR | Input Differential Voltage | $ Supply Voltage | V |
| V ICR | Input Common Mode Voltage Range | - 0.5 to (V+) + 0.5 | V |
| Maximum Input Current | 10 | mA | |
| t So | Output Short Circuit (Note 1) | Continuous | |
| T J | Maximum Junction Temperature | 150 | ° C |
| T A | Operating Ambient Temperature Range LMV321, LMV358, LMV324 LMV321I, LMV358I NCV321 (Note 2) | - 40 to 85 - 40 to 125 - 40 to 125 | ° C ° C ° C |
| q JA | Thermal Resistance: | ° C/W | |
| q JA | SC - 70 | 280 | |
| q JA | Micro8 | 238 | |
| q JA | TSOP - 5 | 333 | |
| q JA | UDFN8 (1.2 mmx 1.8 mmx 0.5 mm) | 350 | |
| q JA | SOIC - 8 | 212 | |
| q JA | SOIC - 14 | 156 | |
| q JA | TSSOP - 14 | 190 | |
| T stg | Storage Temperature | - 65 to 150 | ° C |
| Mounting Temperature (Infrared or Convection - 20 sec) | 260 | ° C | |
| V ESD | ESD Tolerance (Note 3) LMV321, LMV321I, NCV321 Machine Model Human Body Model LMV358/358I/324 Machine Model Human Body Mode | 100 1000 100 2000 | V |
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected.
-
Continuous short -circuit operation to ground at elevated ambient temperature can result in exceeding the maximum allowed junction temperature of 150 ° C. Output currents in excess of 45 mA over long term may adversely affect reliability. Shorting output to either V+ or V -will adversely affect reliability.
-
NCV prefix is qualified for automotive usage.
-
Human Body Model, applicable std. MIL -STD -883, Method 3015.7 Machine Model, applicable std. JESD22 -A115 -A (ESD MM std. of JEDEC) Field -Induced Charge -Device Model, applicable std. JESD22 -C101 -C (ESD FICDM std. of JEDEC).
2.7 V DC ELECTRICAL CHARACTERISTICS (Unless otherwise specified, all limits are guaranteed for T A = 25 ° C, V + = 2.7 V, RL = 1 M W , V -= 0 V, V O = V+/2)
| Parameter | Symbol | Condition | Min | Typ | Max | Unit |
|---|---|---|---|---|---|---|
| Input Offset Voltage | V IO | T A = T Low to T High (Note 4) | 1.7 | 9 | mV | |
| Input Offset Voltage Average Drift | ICV OS | T A = T Low to T High (Note 4) | 5 | m V/ ° C | ||
| Input Bias Current | I B | T A = T Low to T High (Note 4) | <1 | nA | ||
| Input Offset Current | I IO | T A = T Low to T High (Note 4) | <1 | nA | ||
| Common Mode Rejection Ratio | CMRR | 0 V v V CM v 1.7 V | 50 | 63 | dB | |
| Power Supply Rejection Ratio | PSRR | 2.7 V v V+ v 5 V, V O = 1 V | 50 | 60 | dB | |
| Input Common - Mode Voltage Range | V CM | For CMRR w 50 dB | 0 to 1.7 | - 0.2 to 1.9 | V | |
| Output Swing | V OH | R L = 10 k W to 1.35 V | V CC - 100 | V CC - 10 | mV | |
| Output Swing | V OL | R L = 10 k W to 1.35 V (Note 5) | 60 | 180 | mV | |
| Supply Current LMV321, NCV321 LMV358/LMV358I (Both Amplifiers) LMV324 (4 Amplifiers) | I CC | 80 140 260 | 185 340 680 | m A |
Typical Application
- Portable Battery -Operated Instruments
- Notebook Computers and PDA's
- Active Filters
Package Information
| MILLIMETERS | MILLIMETERS | INCHES | INCHES | |
|---|---|---|---|---|
| DIM | MIN | MAX | MIN | MAX |
| A | 4.80 | 5.00 | 0.189 | 0.197 |
| B | 3.80 | 4.00 | 0.150 | 0.157 |
| C | 1.35 | 1.75 | 0.053 | 0.069 |
| D | 0.33 | 0.51 | 0.013 | 0.020 |
| G | 1.27 BSC | 1.27 BSC | 0.050 BSC | 0.050 BSC |
| H | 0.10 | 0.25 | 0.004 | 0.010 |
| J | 0.19 | 0.25 | 0.007 | 0.010 |
| K | 0.40 | 1.27 | 0.016 | 0.050 |
| M | 0 _ | 8 _ | 0 _ | 8 _ |
| N | 0.25 | 0.50 | 0.010 | 0.020 |
| S | 5.80 | 6.20 | 0.228 | 0.244 |
Related Variants
The following components are covered by the same datasheet.
| Part Number | Manufacturer | Package |
|---|---|---|
| LMV358 | Texas Instruments | — |
| LMV358/358I | Texas Instruments | — |
| LMV358/358I/324 | Texas Instruments | — |
| LMV358DMR2G | Texas Instruments | — |
| LMV358I | Texas Instruments | — |
| LMV358IDR | Texas Instruments | 8-SOIC (0.154", 3.90mm Width) |
| LMV358IDR2G | Texas Instruments | — |
| LMV358MUTAG | Texas Instruments | — |
Get structured datasheet data via API
Get started free