Skip to main content

We use cookies to understand how you use our site and improve your experience. See our Privacy Policy.

LMV358/358I/324

Dual/Quad Rail-to-Rail CMOS Op Amp

The LMV358/358I/324 is a dual/quad rail-to-rail cmos op amp from Texas Instruments. View the full LMV358/358I/324 datasheet below including key specifications, electrical characteristics, absolute maximum ratings.

LMV358/358I/324 shares its datasheet with LMV358I, whose page lists every part number it covers.

Official LMV358/358I/324 datasheet (PDF) — the source this page was extracted from.

Manufacturer

Texas Instruments

Category

Integrated Circuits

LMV358/358I/324 Key Specifications

ParameterValue
CMRR65 dB typ (5 V)
PSRR60 dB typ
Slew Rate1 V/us
Phase Margin60 deg
Input Bias Current<1 nA
Storage Temperature-65°C to 150°C
Input Offset Voltage1.7 mV typ, 9 mV max
Supply Voltage Range2.7 V to 5.5 V
Gain Bandwidth Product1 MHz
Input-Referred Voltage Noise50 nV/√Hz at 50 kHz
Maximum Junction Temperature150°C
Output Short Circuit Current60 mA sourcing, 160 mA sinking typ
Input Common-Mode Range (5 V)-0.2 V to 4.2 V typ
Operating Temperature Range (LMV358I)-40°C to 125°C
Supply Current (LMV324, Four Amps, 5 V)410 uA typ, 830 uA max
Supply Current (LMV358, Both Amps, 5 V)210 uA typ, 440 uA max
Operating Temperature Range (LMV358/LMV324)-40°C to 85°C

LMV358/358I/324 Overview

Part: LMV358 / LMV358I (dual) — onsemi (LMV321/LMV324/NCV321 family)

Type: Dual Low-Voltage Rail-to-Rail CMOS Operational Amplifier

Description: 2.7–5.5 V, dual CMOS op amp with rail-to-rail output, 1 MHz gain-bandwidth product and about 210 μA typical supply current (both amplifiers) at 5 V.

Operating Conditions:

  • Supply voltage: 2.7–5.5 V (specified at 2.7 V and 5 V)
  • Operating temperature: -40 to 85 °C for LMV358; -40 to 125 °C for LMV358I
  • Input common-mode range includes ground (0 to 4 V guaranteed at V+ = 5 V for CMRR ≥ 50 dB)

Absolute Maximum Ratings:

  • Max supply voltage: 5.5 V
  • Max input current: 10 mA
  • Input common-mode voltage range: -0.5 to (V+) + 0.5 V
  • Max junction temperature: 150 °C
  • Storage temperature: -65 to 150 °C
  • ESD (LMV358/358I/324): HBM 2000 V, MM 100 V

Key Specs:

  • Input offset voltage: 1.7 mV typ, 9 mV max (V+ = 5 V, TA = TLow to THigh)
  • Input bias current: <1 nA typ
  • Supply current, LMV358/358I (both amplifiers): 210 μA typ, 440 μA max at 25 °C (V+ = 5 V); 140 μA typ, 340 μA max at 2.7 V
  • Gain bandwidth product: 1 MHz (CL = 200 pF)
  • Slew rate: 1 V/μs (V+ = 5 V)
  • Phase margin: 60°; gain margin: 10 dB
  • CMRR: 65 dB typ (50 dB min); PSRR: 60 dB typ (50 dB min)
  • Output swing at 5 V, RL = 10 kΩ: VOH ≥ VCC - 100 mV, VOL 65 mV typ (180 mV max)
  • Output short-circuit current at 5 V: 60 mA typ sourcing, 160 mA typ sinking (10 mA min each)
  • Input-referred voltage noise: 50 nV/√Hz at 50 kHz

Features:

  • Operation from 2.7 V to 5.0 V single-sided supply
  • Rail-to-rail output
  • No output crossover distortion
  • No output phase reversal from overdriven input
  • Low quiescent current (LMV358 dual: 220 μA max per channel)
  • Pb-free, halogen-free/BFR-free, RoHS compliant
  • NCV prefix for automotive: AEC-Q100 qualified and PPAP capable (NCV321)

Applications:

  • Portable battery-operated instruments
  • Notebook computers and PDAs
  • Active filters

Package:

  • SOIC-8 (LMV358DR2G, LMV358IDR2G; 2500/reel)
  • Micro8 (LMV358DMR2G; 4000/reel)
  • UDFN8, 1.2 × 1.8 × 0.5 mm (LMV358MUTAG; 3000/reel)

LMV358/358I/324 Features

  • LMV321 Single Available in Ultra Small 5 Pin SC70 Package
  • Operation from 2.7 V to 5.0 V Single -Sided Power Supply
  • No Output Crossover Distortion
  • Low Quiescent Current: LMV358 Dual -220 m A, Max per Channel
  • Rail -to -Rail Output
  • No Output Phase -Reversal from Overdriven Input
  • These Devices are Pb -Free, Halogen Free/BFR Free and are RoHS Compliant
  • NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC -Q100 Qualified and PPAP Capable

LMV358/358I/324 Applications

  • Portable Battery -Operated Instruments
  • Notebook Computers and PDA's
  • Active Filters

LMV358/358I/324 Electrical Characteristics

ParameterSymbolConditionMinTypMaxUnit
Gain Bandwidth ProductGBWPC L = 200 pF1MHz
Phase MarginQ m60°
Gain MarginG m10dB
Input - Referred Voltage Noisee nf = 50 kHz50nV/ √ Hz

Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions.

  1. For LMV321, LMV358, LMV324: T A = -40 C to +85 C For LMV321I, LMV358I, NCV321: T A = -40 ° C to +125 ° C.

° °

  1. Guaranteed by design and/or characterization.

5.0 V DC ELECTRICAL CHARACTERISTICS (Unless otherwise specified, all limits are guaranteed for T A = 25 ° C, V + = 5.0 V, RL = 1 M W , V -= 0 V, V O = V+/2)

ParameterSymbolConditionMinTypMaxUnit
Input Offset VoltageV IOT A = T Low to T High (Note 6)1.79mV
Input Offset Voltage Average DriftT C V IOT A = T Low to T High (Note 6)5m V/ ° C
Input Bias Current (Note 7)I BT A = T Low to T High (Note 6)< 1nA
Input Offset Current (Note 7)I IOT A = T Low to T High (Note 6)< 1nA
Common Mode Rejection RatioCMRR0 V v V CM v 4 V5065dB
Power Supply Rejection RatioPSRR2.7 V v V+ v 5 V, V O = 1 V, V CM = 1 V5060dB
Input Common - Mode Voltage RangeV CMFor CMRR w 50 dB0 to 4- 0.2 to 4.2V
Large Signal Voltage Gain (Note 7)A VR L = 2 k W15100V/mV
Output SwingT A = T Low to T High (Note 6)10V/mV
V OHR L = 2 k W to 2.5 V T A = T Low to T High (Note 6)V CC - 300 V CC - 400V CC - 40mV
V OLR L = 2 k W to 2.5 V (Note 7) T A = T Low to T High (Note 6)120300 400mV
V OHR L = 10 k W to 2.5 V (Note 7) T A = T Low to T High (Note 6)V CC - 100 V CC - 200mV
V OLR L = 10 k W to 2.5 V T A = T Low to T High (Note 6)65180 280mV
Output Short Circuit CurrentI OSourcing = V O = 0 V (Note 7) Sinking = V O = 5 V (Note 7)10 1060 160mA
Supply CurrentI CCLMV321 T A = T Low to T High (Note 6)130250 350m A
Supply CurrentNCV321 T A = T Low to T High (Note 6)130250 350m A
Supply CurrentLMV358/358I Both Amplifiers T A = T Low to T High (Note 6)210440 615m A
Supply CurrentLMV324 All Four Amplifiers T A = T Low to T High (Note 6)410830 1160m A

5.0 V AC ELECTRICAL CHARACTERISTICS (Unless otherwise specified, all limits are guaranteed for T A = 25 ° C, V + = 5.0 V, RL = 1 M W , V -= 0 V, V O = V+/2)

ParameterSymbolConditionMinTypMaxUnit
Slew RateS R1V/ m s
Gain Bandwidth ProductGBWPC L = 200 pF1MHz
Phase MarginQ m60°
Gain MarginG m10dB
Input - Referred Voltage Noisee nf = 50 kHz50nV/ √ Hz

Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions.

  1. For LMV321, LMV358, LMV324: T A = -40 C to +85 C

For LMV321I, LMV358I, NCV321: T A = -40 C to +125 C.

° ° ° °

  1. Guaranteed by design and/or characterization.

(T A = 25 ° C and V S = 5 V unless otherwise specified)

(T A = 25 ° C and V S = 5 V unless otherwise specified)

(T A = 25 ° C and V S = 5 V unless otherwise specified)

(T A = 25 ° C and V S = 5 V unless otherwise specified)

Figure 19. Source Current vs. Output Voltage VS = 5.0 V

Figure 21. Settling Time vs. Capacitive Load

Figure 20. Settling Time vs. Capacitive Load

Figure 22. Step Response -Small Signal

Figure 23. Step Response -Small Signal

Figure 24. Step Response -Large Signal

(T A = 25 ° C and V S = 5 V unless otherwise specified)

Figure 25. Step Response -Large Signal

LMV358/358I/324 Absolute Maximum Ratings

SymbolRatingValueUnit
V SSupply Voltage (Operating Range V S = 2.7 V to 5.5 V)5.5V
V IDRInput Differential Voltage$ Supply VoltageV
V ICRInput Common Mode Voltage Range- 0.5 to (V+) + 0.5V
Maximum Input Current10mA
t SoOutput Short Circuit (Note 1)Continuous
T JMaximum Junction Temperature150° C
T AOperating Ambient Temperature Range LMV321, LMV358, LMV324 LMV321I, LMV358I NCV321 (Note 2)- 40 to 85 - 40 to 125 - 40 to 125° C ° C ° C
q JAThermal Resistance:° C/W
q JASC - 70280
q JAMicro8238
q JATSOP - 5333
q JAUDFN8 (1.2 mmx 1.8 mmx 0.5 mm)350
q JASOIC - 8212
q JASOIC - 14156
q JATSSOP - 14190
T stgStorage Temperature- 65 to 150° C
Mounting Temperature (Infrared or Convection - 20 sec)260° C
V ESDESD Tolerance (Note 3) LMV321, LMV321I, NCV321 Machine Model Human Body Model LMV358/358I/324 Machine Model Human Body Mode100 1000 100 2000V

Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected.

  1. Continuous short -circuit operation to ground at elevated ambient temperature can result in exceeding the maximum allowed junction temperature of 150 ° C. Output currents in excess of 45 mA over long term may adversely affect reliability. Shorting output to either V+ or V -will adversely affect reliability.

  2. NCV prefix is qualified for automotive usage.

  3. Human Body Model, applicable std. MIL -STD -883, Method 3015.7 Machine Model, applicable std. JESD22 -A115 -A (ESD MM std. of JEDEC) Field -Induced Charge -Device Model, applicable std. JESD22 -C101 -C (ESD FICDM std. of JEDEC).

2.7 V DC ELECTRICAL CHARACTERISTICS (Unless otherwise specified, all limits are guaranteed for T A = 25 ° C, V + = 2.7 V, RL = 1 M W , V -= 0 V, V O = V+/2)

ParameterSymbolConditionMinTypMaxUnit
Input Offset VoltageV IOT A = T Low to T High (Note 4)1.79mV
Input Offset Voltage Average DriftICV OST A = T Low to T High (Note 4)5m V/ ° C
Input Bias CurrentI BT A = T Low to T High (Note 4)<1nA
Input Offset CurrentI IOT A = T Low to T High (Note 4)<1nA
Common Mode Rejection RatioCMRR0 V v V CM v 1.7 V5063dB
Power Supply Rejection RatioPSRR2.7 V v V+ v 5 V, V O = 1 V5060dB
Input Common - Mode Voltage RangeV CMFor CMRR w 50 dB0 to 1.7- 0.2 to 1.9V
Output SwingV OHR L = 10 k W to 1.35 VV CC - 100V CC - 10mV
Output SwingV OLR L = 10 k W to 1.35 V (Note 5)60180mV
Supply Current LMV321, NCV321 LMV358/LMV358I (Both Amplifiers) LMV324 (4 Amplifiers)I CC80 140 260185 340 680m A

LMV358/358I/324 Typical Application

  • Portable Battery -Operated Instruments
  • Notebook Computers and PDA's
  • Active Filters

LMV358/358I/324 Package Information

DIMMILLIMETERS - MINMILLIMETERS - MAXINCHES - MININCHES - MAX
A4.805.000.1890.197
B3.804.000.1500.157
C1.351.750.0530.069
D0.330.510.0130.020
G1.27 BSC1.27 BSC0.050 BSC0.050 BSC
H0.100.250.0040.010
J0.190.250.0070.010
K0.401.270.0160.050
M0 _8 _0 _8 _
N0.250.500.0100.020
S5.806.200.2280.244

Variants on the same datasheet

These parts have exact links to the same datasheet. They are candidates to compare, not verified drop-in replacements; check package, pinout and electrical limits.

Part NumberManufacturerPackage
LMV358Texas Instruments—
LMV358/358ITexas Instruments—
LMV358DMR2GTexas InstrumentsMicro8
LMV358DR2GTexas InstrumentsSOIC-8
LMV358ITexas Instruments—
LMV358IDRTexas Instruments8-SOIC (0.154", 3.90mm Width)
LMV358IDR2GTexas InstrumentsSOIC-8
LMV358MUTAGTexas InstrumentsUDFN8

Other Integrated Circuits

All Integrated Circuits datasheetsAll Texas Instruments datasheets (2,442)

Data on this page is extracted from publicly available manufacturer datasheets using automated tools including AI. It may contain errors or omissions. Always verify specifications against the official manufacturer datasheet before making design or purchasing decisions. See our Terms of Service. Rights holders can submit a takedown request.

Ask your AI agent about the LMV358/358I/324

Connect SheetsData to Claude, Cursor, Codex or any MCP client and your agent reads this datasheet for you: pinout, limits, register maps and design checks, with the numbers taken from the PDF.

claude mcp add --transport http sheetsdata https://mcp.sheetsdata.com/mcp

Then ask: "Can the LMV358/358I/324 run from my 12 V rail? Check it against the datasheet limits."

Create a free account $2 of usage every month, no card needed.