CAT24M01

Part: CAT24M01YI-GT3 — onsemi (ON Semiconductor)

Type: I²C Serial EEPROM (1-Mb)

Description: 1-Mb (131,072 × 8) I²C serial EEPROM with a 1.8–5.5 V supply, 256-byte page write buffer, and support for Standard, Fast and Fast-Plus (1 MHz) modes with on-chip ECC.

Operating Conditions:

• Supply voltage: 1.8–5.5 V (Fast-Plus 1 MHz: 2.5–5.5 V)
• Operating temperature: -40 to +85 °C for the CAT24M01YI-GT3 (TSSOP-8, industrial grade)
• Clock frequency: up to 100 kHz (Standard), 400 kHz (Fast), 1 MHz (Fast-Plus)

Absolute Maximum Ratings:

• Voltage on any pin with respect to ground: -0.5 to +6.5 V
• Storage temperature: -65 to +150 °C
• Junction temperature: +150 °C

Key Specs:

• Read current (ICCR, fSCL = 400 kHz / 1 MHz): 1 mA max
• Write current (ICCW): 3.5 mA max at VCC = 1.8 V; 5.0 mA max at VCC = 5.5 V
• Standby current (ISB): 2 μA max (TA = -40 to +85 °C)
• I/O pin leakage (IL): 1 μA max (TA = -40 to +85 °C)
• Input low voltage VIL: 0.3 VCC max (2.5–5.5 V); 0.25 VCC max (1.8–2.5 V)
• Input high voltage VIH: 0.7 VCC min (2.5–5.5 V); 0.75 VCC min (1.8–2.5 V)
• Output low voltage VOL: 0.4 V max (VCC ≥ 2.5 V, IOL = 3 mA); 0.2 V max (VCC < 2.5 V, IOL = 1 mA)
• Write cycle time (tWR): 5 ms max
• Endurance: 1,000,000 program/erase cycles; data retention: 100 years

Features:

• 1.8 V to 5.5 V supply voltage range
• Supports Standard, Fast and Fast-Plus I²C protocol
• 256-byte page write buffer
• Schmitt triggers and noise suppression filters on SCL and SDA
• Hardware write protection for entire memory via WP pin
• On-chip ECC (error correction code)
• Power-on reset circuitry
• Up to four devices on one bus via A1/A2 address pins
• Low power CMOS technology
• Pb-free, halogen free/BFR free, RoHS compliant

Applications:

• High-reliability applications requiring non-volatile storage (on-chip ECC)

Package:

• TSSOP-8 (CASE 948AL), tape & reel, 3,000 units/reel, NiPdAu lead finish
• Other family packages: SOIC-8 (JEDEC and EIAJ), UDFN8 3.0×2.0 mm, 0.5 mm pitch

• 1.8 V to 5.5 V Supply Voltage Range
• Supports Standard, Fast and Fast -Plus I 2 C Protocol
• 256 -Byte Page Write Buffer
• Schmitt Triggers and Noise Suppression Filters on I 2 C Bus Inputs (SCL and SDA)
• Hardware Write Protection for Entire Memory
• Low Power CMOS Technology
• 100 Year Data Retention
• 1,000,000 Program/Erase Cycles
• Industrial and Extended Temperature Range
• These Devices are Pb -Free, Halogen Free/BFR Free and are RoHS Compliant
• 8 -pin, SOIC, TSSOP and 8 -pad UDFN Packages

Figure 1. Functional Symbol

UDFN -8 HU5 SUFFIX CASE 517BU

SOIC -8 W SUFFIX CASE 751BD

SOIC -8 WIDE X SUFFIX CASE 751BE

TSSOP -8 Y SUFFIX CASE 948AL

SDA

WP

VCC

VSS

A2

A1

NC

1

SCL

SOIC (W, X), TSSOP (Y), UDFN (HU5)

For the location of Pin 1, please consult the corresponding package drawing.

Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected.

1. The DC input voltage on any pin should not be lower than -0.5 V or higher than V CC + 0.5 V. During transitions, the voltage on any pin may undershoot to no less than -1.5 V or overshoot to no more than V CC + 1.5 V, for periods of less than 20 ns.