23LC1024

Part: 23LC1024 — Microchip Technology Inc.

Type: 1 Mbit SPI Serial SRAM

Description: 1 Mbit (128K x 8-bit) Serial SRAM with SPI, SDI, and SQI interface, supporting 20 MHz clock rates and operating from 2.5V to 5.5V.

Operating Conditions:

• Supply voltage: 2.5–5.5V
• Operating temperature: -40 to +85 °C
• Max clock frequency: 20 MHz

Absolute Maximum Ratings:

• Max supply voltage: 6.5V
• Max junction/storage temperature: +150 °C

Key Specs:

• Read current: 3 mA (at 5.5V, 20 MHz)
• Standby current: 4 μA (at 5.5V, +85°C)
• Input leakage current: ±1 μA
• Output leakage current: ±1 μA
• Input capacitance: 7 pF (VCC = 0V, f = 1 MHz, Ta = 25°C)
• High-level output voltage: VCC -0.5 V (IOH = -400 μA)
• Low-level output voltage: 0.2 V (IOL = 1 mA)
• Data setup time: 10 ns

Features:

• SPI-Compatible Bus Interface: SPI/SDI/SQI mode
• Low-Power CMOS Technology
• Unlimited Read and Write Cycles
• Zero Write Time
• 128K x 8-bit Organization with 32-byte page
• Byte, Page and Sequential mode for Reads and Writes
• High Reliability
• Pb-Free and RoHS Compliant, Halogen Free

Applications:

Package:

• 8 Lead SOIC
• 8 Lead TSSOP
• 8 Lead PDIP

• SPI-Compatible Bus Interface:
• -20 MHz Clock rate
• -SPI/SDI/SQI mode
• Low-Power CMOS Technology:
• -Read Current: 3 mA at 5.5V, 20 MHz
• -Standby Current: 4 A at +85°C
• Unlimited Read and Write Cycles
• Zero Write Time
• 128K x 8-bit Organization:
• -32-byte page
• Byte, Page and Sequential mode for Reads and Writes
• High Reliability
• Temperature Range Supported:
• -Industrial (I): -40 C to +85 C
• Pb-Free and RoHS Compliant, Halogen Free
• 8 Lead SOIC, TSSOP and PDIP Packages

Note 1: This parameter is periodically sampled and not 100% tested.

TABLE 1-3: AC TEST CONDITIONS

• All inputs and outputs w.r.t. VSS ......................................................................................................... -0.3V to VCC +0.3V
• Storage temperature ...............................................................................................................................-65°C to +150°C
• Ambient temperature under bias...............................................................................................................-40°C to +85°C

† NOTICE : Stresses above those listed under 'Absolute Maximum Ratings' may cause permanent damage to the device. This is a stress rating only and functional operation of the device at those or any other conditions above those indicated in the operational listings of this specification is not implied. Exposure to maximum rating conditions for an extended period of time may affect device reliability.